1. Configuración
Carefully remove all components from the packaging. Ensure all parts are present before proceeding with assembly and setup.
1.1 Asamblea
- Coloque la lamp base sobre una superficie estable y plana.
- Insertar la lamp pole into the base and secure it by turning the knob clockwise until firm.
- Adjuntar el lamp head to the top of the pole and tighten the adjustment knob to hold it in place.
1.2 Conexión de alimentación
Plug the power cable into the port at the back of the lamp base, then connect the other end to a standard 120V electrical outlet.
Figure 1: Fully assembled OttLite Restore LED Desk Lamp with a phone charging via the integrated USB port.
2. Instrucciones de funcionamiento
2.1 Encendido/apagado y ajuste de brillo
El lamp features a touch-sensitive switch located on the base. Tap the switch to cycle through the three brightness levels and to turn the lamp apagado.
- Primer toque: Low Brightness (approx. 160 lumens)
- Segundo toque: Medium Brightness (approx. 320 lumens)
- Tercer toque: High Brightness (approx. 485 lumens)
- Cuarto toque: Apagado
El lamp includes a memory feature that remembers your last brightness setting when turned off and on again.
Figure 2: Location of the touch-sensitive power switch on the lamp base.
2.2 Selección de temperatura de color
Este lamp offers three distinct color temperature modes to suit various tasks and preferences. To change the color temperature, press and hold the touch-sensitive switch for 2-3 seconds. The lamp will cycle through the following modes:
- ClearSun Natural Daylight (5000K): Provides balanced, natural light ideal for reading, crafting, and tasks requiring high color accuracy.
- Blanco brillante (4000K): A cooler white light suitable for general illumination and focused work.
- Blanco cálido (2700K): A softer, warmer light for relaxation or ambient lighting.
Figura 3: El lamp's three adjustable color temperature settings.
2.3 puertos de carga USB
El lamp is equipped with a 5V, 2.1A USB port located on the base. This port allows you to charge compatible devices such as smartphones, smartwatches, and tablets. Simply connect your device's USB charging cable to the port.
Figure 4: Integrated 5V, 2.1A USB charging port on the lamp base.
2.4 Ajuste de Lamp Posición
The OttLite Restore lamp features an articulating neck and pivoting shade for optimal light positioning. You can adjust the height of the lamp from 9 inches to 22 inches. Loosen the adjustment knobs on the pole and near the lamp head to reposition, then tighten them to secure the desired angle and height.
Figure 5: Articulating neck and pivoting shade for flexible light direction.
Figura 6: El lamp's adjustable height feature, ranging from 9 to 22 inches.
2.5 ClearSun LED Technology Overview
The OttLite Restore LED Desk Lamp utilizes proprietary ClearSun LED technology. This technology is designed to closely match the spectral output of natural sunlight, providing balanced and smooth lighting across the entire visual spectrum. This helps to reduce eyestrain by up to 51% and enhances color rendering, making colors appear more vivid and true-to-life (CRI of 97).
Vídeo 1: Un finalview of OttLite's ClearSun LED technology, explaining its benefits for eye health and color accuracy by matching natural sunlight's spectrum.
3. Mantenimiento
3.1 Limpieza
Para limpiar el lamp, ensure it is unplugged from the power outlet. Use a soft, dry cloth to wipe down the surfaces. Do not use abrasive cleaners, solvents, or polishes as these may damage the finish or electrical components.
3.2 Vida útil del LED
The integrated LEDs in this lamp are rated to last up to 40,000 hours under normal use. The LEDs are not user-replaceable. If the light source fails, the entire lamp Es posible que sea necesario reemplazar la unidad.
4. Solución de problemas
- Lamp no se enciende:
- Check if the power cable is securely plugged into both the lamp y la toma de corriente eléctrica.
- Verifique que el tomacorriente eléctrico funcione enchufando otro dispositivo.
- Ensure the touch-sensitive switch is being pressed correctly.
- El puerto de carga USB no funciona:
- Confirmar el lamp is powered on and connected to a live electrical outlet.
- Pruebe con un cable o dispositivo USB diferente para descartar problemas con el cable o el dispositivo.
- La luz parpadea o es inconsistente:
- Ensure the power connection is stable and there are no loose connections.
- Evite usar la lamp with dimmer switches not specifically designed for LED lighting, as this can cause flickering.
5. Especificaciones
| Nombre del modelo | OTTCS01RB9SHPR |
| Dimensiones del producto | 12" de profundidad x 8" de ancho x 21" de alto |
| Altura ajustable | 9" a 22" |
| Peso del artículo | 4.76 libras |
| Material base | Metal |
| Material de la sombra | Metal |
| Color de sombra | Negro |
| Color | Bronce |
| Tipo de fuente de luz | LED (OttLite ClearSun LED) |
| Quétage | 12 vatios |
| Salida de luz máxima | 485 lúmenes |
| Temperaturas de color | ClearSun Natural Daylight (5000K), Bright White (4000K), Warm White (2700K) |
| Puerto USB de salida | 5 V, 2.1 A |
| Tipo de interruptor | Tocar |
| Volumentage | 120 voltios |
| Código Postal | 761712016849 |
6. Información de garantía
This OttLite Restore LED Desk Lamp está cubierto por una Garantía limitada de 3 años. For specific terms and conditions, please refer to the warranty card included with your product or visit the official OttLite websitio.
7. Soporte
For further assistance, technical support, or to inquire about replacement parts, please contact OttLite Customer Service. Contact details can typically be found on the OttLite websitio o en el embalaje del producto.
Conserve este manual para futuras consultas.