Manual del usuario del conjunto de focos LED lightmaXX CLS Nano RGBW

Producto terminadoview

The lightmaXX CLS Nano RGBW is an LED lighting system featuring four spotlights, designed for use on theater and stage productions. Its compact size and low weight also make it suitable for mobile applications.

Each spotlight is equipped with three powerful 4W QCL LEDs, contributing to a total power consumption of 48 watts. The COB LEDs incorporate red, green, blue, and white primary colors, allowing for the creation of a wide spectrum of other colors through mixing. The beam angle is 25 degrees. Additionally, the QCL LEDs offer stepless dimming from 0-100% and can produce a powerful strobe effect. Control options include DMX and music control.

The lightmaXX CLS Nano RGBW LED Spot Set, showcasing its four individual spotlights mounted on a central bar, with the LEDs emitting green light.

Instrucciones de seguridad

Lea y comprenda todas las instrucciones de seguridad antes de utilizar el dispositivo. De lo contrario, podría sufrir lesiones o dañar el producto.

• Siempre conecte el dispositivo a una toma de corriente con conexión a tierra.
• Asegure una ventilación adecuada alrededor de la unidad para evitar el sobrecalentamiento.
• No exponga el dispositivo a la lluvia ni a la humedad.
• Evite la exposición directa de los ojos a la fuente de luz.
• Sólo personal calificado debe realizar servicios o reparaciones.
• Desconecte de la alimentación antes de limpiar o realizar mantenimiento.

Configuración

Desembalaje

Carefully remove the CLS Nano RGBW from its packaging. Inspect the unit for any signs of damage during transit. Retain the packaging for future storage or transport.

Montaje

The CLS Nano RGBW is designed for secure mounting on a lighting stand or truss system. Use appropriate clamps and safety cables (not included) to ensure the unit is securely fastened and cannot fall. Ensure the mounting surface can support the weight of the fixture (7.13 kg).

Conexiones

Conecte el dispositivo de la siguiente manera:

• Conexión de energía: Use the provided IEC power cable to connect the unit to a suitable mains power outlet.
• Conexión DMX (opcional): For DMX control, connect a 3-pin XLR DMX cable from your DMX controller's output to the unit's DMX IN port. If linking multiple units, connect from the first unit's DMX OUT to the next unit's DMX IN.

Parte trasera detallada view of the lightmaXX CLS Nano RGBW, highlighting the power input, DMX In/Out ports, and the digital control display with navigation buttons.

Instrucciones de funcionamiento

Panel de control sobreview

The control panel on the rear of the unit features a digital display and four buttons:

• MENÚ: Navega por las opciones del menú principal.
• UP: Aumenta los valores o sube por las opciones del menú.
• ABAJO: Disminuye valores o se mueve hacia abajo a través de las opciones del menú.
• ENTRAR: Confirma selecciones o ingresa a submenús.

Modos de funcionamiento

The CLS Nano RGBW offers several operating modes:

• Modo DMX: For external control via a DMX controller.
• Modo automático: Runs pre-programmed light shows automatically.
• Modo activado por sonido: Reacts to music or sound via a built-in microphone.
• Modo de color estático: Muestra un único color constante.

Control DMX

To operate the unit via DMX, set the DMX address using the control panel. Refer to the DMX channel chart in the full manual for specific channel functions (e.g., Dimmer, Red, Green, Blue, White, Strobe, Programs).

Programas automáticos

Navigate to the Auto mode setting using the MENU button. Use UP/DOWN to select different built-in programs. Press ENTER to confirm. Some programs may allow adjustment of speed or intensity.

Modo activado por sonido

Select the Sound-Activated mode from the menu. The unit will use its internal microphone to react to ambient sound. Adjust the microphone sensitivity if available in the menu to fine-tune the response.

Modo de color estático

In Static Color mode, you can manually select a desired color. Use the UP/DOWN buttons to adjust the intensity of Red, Green, Blue, and White LEDs to create custom colors.

The lightmaXX CLS Nano RGBW LED Spot Set displaying a vibrant red color output from its four spotlights.

The lightmaXX CLS Nano RGBW LED Spot Set illuminating with a deep blue color.

The lightmaXX CLS Nano RGBW LED Spot Set producing a bright white light.

The lightmaXX CLS Nano RGBW LED Spot Set emitting a warm yellow light.

The lightmaXX CLS Nano RGBW LED Spot Set displaying a cool cyan light.

The lightmaXX CLS Nano RGBW LED Spot Set showcasing a rich purple illumination.

The lightmaXX CLS Nano RGBW LED Spot Set with its spotlights in an off state, showing the clear lenses.

Mantenimiento

Limpieza

Regular cleaning helps maintain optimal performance and appearance. Disconnect the unit from power before cleaning.

• Utilice un paño suave que no suelte pelusa para limpiar el exterior.
• Para las lentes, utilice un limpiador de lentes especializado y un paño suave para evitar rayones.
• No utilice limpiadores abrasivos, disolventes ni productos químicos agresivos.

Almacenamiento

When not in use for extended periods, store the CLS Nano RGBW in its original packaging or a suitable flight case. Store in a cool, dry place away from direct sunlight and extreme temperatures.

Solución de problemas

Esta sección aborda problemas comunes que podrías encontrar. Si el problema persiste, contacta con atención al cliente.

Presupuesto

Garantía y soporte

This lightmaXX product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or contact the seller directly.

For technical support, troubleshooting assistance beyond this manual, or spare parts inquiries, please contact your authorized lightmaXX dealer or the manufacturer's customer service department. Keep your purchase receipt and model number (LIG0015656-000) ready when contacting support.