1. Introducción
This manual provides detailed instructions for the setup, operation, and maintenance of your Tera HW0002 Wireless 1D 2D QR Barcode Scanner. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
Contenido del paquete
- Escáner de código de barras x1
- Barcode Scanner Stand x1
- USB cable x1
- Dongle x1 (for 2.4G Wireless connection)
- Manual de usuario x1
This image displays the Tera HW0002 barcode scanner in its stand, alongside the USB charging cable and the 2.4G wireless dongle, illustrating the complete package contents.
2. Configuración
2.1 Carga del escáner
Before first use, fully charge the scanner. Connect the USB cable to the scanner and a power source (e.g., computer USB port or USB wall adapter). The built-in 2000mAh battery provides approximately 16.5-19.5 hours of continuous scanning time and up to 60 days of standby time.
This image highlights the scanner's 2000mAh battery capacity and the visual battery level indicator, showing working time, charging time, and standby time.
2.2 Modos de conexión
The Tera HW0002 supports three connection modes: Bluetooth, 2.4G Wireless, and USB Wired.
This diagram illustrates the three available connection methods: Bluetooth for wireless pairing with devices, USB for direct wired connection, and 2.4G wireless via a USB dongle.
2.2.1 2.4G Wireless Connection (via Dongle)
- Insert the 2.4G USB dongle into an available USB port on your computer or device.
- Encienda el escáner. Debería conectarse automáticamente al dispositivo.
- A successful connection is indicated by a specific sound or LED light on the scanner.
- The transmission distance can reach 328ft in open environments and 114ft in environments with obstacles.
2.2.2 Conexión Bluetooth
- Ensure Bluetooth is enabled on your host device (smartphone, tablet, computer).
- Scan the "Bluetooth Pairing" barcode (refer to the physical manual for this barcode).
- On your host device, search for available Bluetooth devices and select "Tera HW0002" (or similar).
- Pair the devices. A confirmation sound or LED light on the scanner will indicate successful pairing.
2.2.3 Conexión por cable USB
- Conecte el escáner a su computadora usando el cable USB provisto.
- The scanner will function as a standard USB HID keyboard device. No additional drivers are typically required.
3. Operación
3.1 Escaneo básico
Point the scanner at a 1D or 2D barcode and press the trigger button. The scanner will emit a light beam to read the barcode. A successful scan is indicated by a sound, LED illumination, and a mild vibration (if enabled).
This image demonstrates the Tera HW0002 scanner's ability to read both 1D and 2D barcodes directly from digital screens, such as computer monitors.
3.2 Hands-free Scanning with Stand
The included stand allows for hands-free operation. Place the scanner in the stand, and it can be configured for continuous scanning or trigger-activated scanning while docked.
This image shows the barcode scanner positioned in its stand on a desk, ready for hands-free scanning, ideal for environments requiring frequent item processing.
NUNCA configuraciones avanzadas
The scanner can be configured by scanning specific barcodes found in the full user manual. These settings include:
- Volume and Vibration Settings: Adjust the sound level (Off, Low, Medium, High) and enable/disable vibration alerts for successful scans.
- Symbology-Specific Settings: Customize data output for specific barcode types (e.g., Code39). For example, you can set the scanner to delete the first 2 characters and add 2 TAB characters when scanning Code39, while leaving other barcode types unedited.
- Adición de prefijo/sufijo: Add custom characters or data (like date and time) before or after scanned barcode data.
- Modos de carga: Choose between Storage Mode (scans are stored internally and uploaded later) and Instant Upload Mode (scans are transmitted immediately).
- Soporte multi-idioma: Configure the scanner for various keyboard layouts to ensure correct character output.
This graphic illustrates the adjustable volume levels (Off, Low, Medium, High) and the option to toggle vibration alerts on or off for scan confirmations.
This image shows how the scanner can be configured to add the current date and time either before (prefix) or after (suffix) the scanned barcode data.
This diagram illustrates the two data upload modes: Storage Mode, where scanned data is saved internally for batch upload, and Instant Upload Mode, where data is transmitted immediately after each scan.
4. Mantenimiento
4.1 Limpieza
Para mantener un rendimiento de escaneo óptimo, mantenga limpia la ventana óptica del escáner. Utilice un paño suave y sin pelusa, ligeramente seco.ampLimpie con agua o una solución limpiadora suave. Evite materiales abrasivos o productos químicos agresivos.
4.2 Cuidado de la batería
- Cargue el escáner periódicamente, especialmente si lo va a guardar durante un período prolongado.
- Evite descargar completamente la batería con frecuencia, ya que esto puede reducir su vida útil.
- Guarde el escáner en un lugar fresco y seco cuando no esté en uso.
5. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El escáner no se enciende. | Batería baja. | Cargue el escáner durante al menos 3 o 4 horas. |
| Scanner not connecting via 2.4G. | Dongle not properly inserted or not recognized. | Ensure the dongle is firmly inserted. Try a different USB port. Re-pair if necessary (refer to manual for pairing barcode). |
| El escáner no se conecta mediante Bluetooth. | Bluetooth not enabled on host device, or scanner not in pairing mode. | Enable Bluetooth on your device. Scan the "Bluetooth Pairing" barcode in the manual. Ensure no other devices are interfering. |
| Scanned data is incorrect or missing characters. | Incorrect keyboard layout setting or symbology-specific settings. | Scan the appropriate barcode from the manual to set the correct keyboard layout for your region. Review symbology-specific settings. |
| El escáner no lee códigos de barras. | Barcode damaged, poor lighting, or scanner lens is dirty. | Ensure the barcode is clear and well-lit. Clean the scanner lens. Try scanning a different, known-good barcode. |
| No sound or vibration on successful scan. | Volume or vibration alert is disabled. | Scan the appropriate barcodes from the manual to enable sound and vibration alerts. |
6. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | HW0002 |
| Tecnología de conectividad | 2.4G inalámbrico, Bluetooth, cable USB |
| Capacidad de escaneo | 1D, 2D, QR codes (CMOS Imaging) |
| Batería | Iones de litio 2000mAh |
| Tiempo de trabajo | 16.5-19.5 hours (continuous scanning) |
| Tiempo de espera | Hasta 60 días |
| Tiempo de carga | Aproximadamente 3.5 horas |
| Alcance inalámbrico (2.4 G) | 328ft (barrier-free), 114ft (obstacles) |
| Dispositivos compatibles | Computadora de escritorio, computadora portátil, teléfono inteligente, tableta |
| Sistemas operativos | Windows 11/10/8/7/XP, Mac OS, iOS, Android, Linux |
| Dimensiones | 3.3 x 4.8 x 8.8 pulgadas |
| Peso del artículo | 10.5 onzas |
| Características especiales | Patented Battery Level Indicator, Shockproof Silicone Design, Vibration Alert, Supports specific symbology setup, Underwater scanning capability. |
7. Garantía y soporte
Tera products are designed for reliability and performance. For warranty information or technical assistance, please refer to the contact details provided with your purchase documentation or visit the official Tera websitio.
Fabricante: Tera
Fecha de primera disponibilidad: 12 de junio de 2019