1. Introducción
This manual provides instructions for the WITMOTION USB to RS485 Modbus RTU UART Converter Cable. This device offers a straightforward method to connect RS485 Modbus level serial interface devices to a computer via USB. It supports various operating systems and is designed for reliable data transfer.
1.1 ¿Qué hay en la caja?
- 1 x WitMotion USB-RS485 serial cable (1 meter)
- 1 x Welcome guide
Image 1: The WITMOTION USB to RS485 Converter Cable, showing the USB-A connector and the 4-way female socket header.
2. Características
- Diseño robusto: Provides a fast, simple way to connect devices with an RS485 Modbus level serial interface to USB.
- Modbus RTU Access: Offers access to Modbus RTU A (RS485 A), B (RS485 B), VCC (5V), and GND connections.
- Conectar y usar: USB specification 2.0 compliant, supporting the CH340 driver for convenient setup and connections.
- Compatibilidad del sistema operativo: Compatible with Windows XP/7/8/10 (32-bit/64-bit), Linux, Wince, Mac, and Vista.
- Adjustable Baud Rates: Supports baud rates from 300 bps to 1.5 Mbps.
3. Configuración e instalación
3.1 Instalación del controlador
The converter cable utilizes a CH340 chip. Before connecting the cable, ensure the appropriate CH340 driver is installed on your operating system. Drivers are typically available from the manufacturer's website or can be found by searching for 'CH340 driver download'.
3.2 Conexión del cable
- Conecte el extremo USB-A del cable a un puerto USB disponible en su computadora.
- Identify the 4-way female socket header. This header provides the following connections for your RS485 device:
- A (RS485 A): Data A line for RS485 communication.
- B (RS485 B): Data B line for RS485 communication.
- VCC (5V): 5 Volt power supply output.
- TIERRA: Conexión a tierra.
- Connect the 4-way female socket header to your RS485 Modbus device, ensuring correct pin assignments (A to A, B to B, VCC to VCC, GND to GND). Refer to your device's documentation for its specific pinout.
Video 1: Official product video demonstrating the WITMOTION USB to RS485 Converter Cable and its connections.
4. Instrucciones de funcionamiento
Once the cable is physically connected and the drivers are installed, your computer will recognize the device as a virtual COM port. You can then use serial communication software (e.g., PuTTY, RealTerm, or custom applications) to interact with your RS485 Modbus device.
- Open your preferred serial communication software.
- Select the COM port assigned to the WITMOTION USB to RS485 converter. You can find this in your computer's Device Manager (Windows) or by listing serial devices (Linux/Mac).
- Configure the serial port settings to match your RS485 Modbus device's requirements. Key settings include:
- Velocidad en baudios: Set between 300 bps and 1.5 Mbps (e.g., 9600, 19200, 115200).
- Bits de datos: Typically 8.
- Paridad: None, Even, or Odd.
- Bits de parada: Typically 1 or 2.
- Initiate communication with your RS485 Modbus device according to its protocol specifications.
5. Especificaciones
| Característica | Especificación |
|---|---|
| Marca | INGENIO |
| Nombre del modelo | USB to RS485 Modbus RTU UART Converter Cable |
| Número de modelo del artículo | RS485 line |
| Tipo de conector | USB |
| Tipo de cable | USB |
| Dispositivos compatibles | Industrial Equipment, Modbus Devices, Sensors |
| Característica especial | Transferencia de datos |
| Usos recomendados | Connecting devices with RS485 Modbus level serial interface to USB |
| Color | Negro |
| Género del conector | Male-to-Male (USB-A to 4-way header) |
| Velocidad de transferencia de datos | Hasta 1.5 megabits por segundo |
| Número de pines | 4 (on socket header) |
| Vol máximotage | 5 Volts (VCC output) |
| Longitud del cable | 1 metros (3.28 pies) |
| Peso del artículo | 0.04 kilogramos (1.44 onzas) |
| Uso en interiores y exteriores | Interior |
6. Solución de problemas
- Dispositivo no reconocido: Ensure the CH340 driver is correctly installed. Check your computer's Device Manager for any unknown devices or COM port errors. Try a different USB port.
- Errores de comunicación: Verify that the baud rate, data bits, parity, and stop bits in your serial communication software match the settings of your RS485 Modbus device. Incorrect settings are a common cause of communication failure.
- Cableado incorrecto: Double-check the connections between the converter cable's 4-way header and your RS485 device. Ensure A connects to A, B to B, VCC to VCC (if powering the device), and GND to GND.
- Sin transmisión de datos: Confirm that your RS485 device is powered on and functioning correctly. Test with a known working RS485 device if possible.
- Conexión intermitente: Ensure all connections are secure. Avoid excessively long or unshielded RS485 bus lines, which can introduce noise.
7. Garantía y soporte
WITMOTION provides a Garantía de 12 meses for this product, along with lifetime friendly customer service.
7.1 Obtención de apoyo
If you require assistance or have questions, please use one of the following methods:
- Guiding Card: Refer to the tutorial link printed on the guiding card included in the product package.
- Tutoriales en línea: Visita wit-motion.com and navigate to the support page to download complete tutorials and documentation.
- Soporte por correo electrónico: Contact the WITMOTION support team directly via email at soporte@wit-motion.com.