NVX XCADJ1 Universal Metal Car Backup Camera User Manual

1. Introducción

This manual provides instructions for the installation, operation, and maintenance of the NVX XCADJ1 Universal Metal Car Backup Camera. This camera is designed to provide enhanced visibility behind your vehicle, aiding in safe reversing and parking maneuvers. It features a durable metal construction and a wide viewÁngulo de visión para una cobertura integral.

2. ¿Qué hay en la caja?

Verifique que todos los componentes estén presentes antes de comenzar la instalación.

• NVX XCADJ1 Backup Camera (attached to main wiring harness with 6-pin connector)
• Tira adhesiva 3M
• 19-foot Extended Connection Cable
• Tornillos de montaje
• Manual del propietario (este documento)

Figura 2.1: The NVX XCADJ1 camera, demonstrating its compact size relative to a US quarter.

Figura 2.2: The NVX XCADJ1 camera unit with its integrated short wiring harness, including the 6-pin connector and RCA output.

Figura 2.3: The included 19-foot extension cable, designed for connecting the camera to the vehicle's display unit.

3. Características del producto

• Ajuste universal: Designed for compatibility with a wide range of vehicles.
• Construcción duradera: Features an all-metal body for enhanced longevity.
• Resolución alta: Equipped with a 1089HDCCD Image Sensor for clear video output.
• Ancho Viewángulo de inclinación: Proporciona una visión de 170° viewing angle for comprehensive rear visibility.
• Diseño a prueba de agua: IP68-rated, resistant to dust, dirt, sand, and submersion up to 1.5m for 30 minutes.
• Distance Mark Feature: Includes on-screen guidelines that can be toggled ON or OFF.
• Instalación flexible: Can be used as either a front or rear camera.
• Simplified Connection: Utilizes a 6-pin connector for a cleaner installation compared to bulky RCA connections.
• Alcance extendido: Includes a 19-foot extension wiring harness for installation in larger vehicles.
• Salida de vídeo: NTSC Video Signal Out (RCA).

4. Configuración e instalación

Proper installation is crucial for optimal performance. It is recommended that installation be performed by a qualified professional if you are unfamiliar with vehicle electrical systems.

4.1 Montaje de la cámara

1. Elegir la ubicación: Select a suitable mounting location at the rear of your vehicle, typically above the license plate or near the trunk handle. Ensure the camera has a clear, unobstructed view. If using as a front camera, choose a suitable front mounting point.
2. Cámara segura: Use the provided 3M adhesive strip or mounting screws to securely attach the camera in the chosen location. Ensure the camera is oriented correctly for the desired viewángulo de ing.

4.2 conexiones de cableado

The XCADJ1 camera uses a 6-pin connector for its main harness, which then converts to an RCA video output and power wires.

1. Connect Camera Harness: Connect the camera's integrated 6-pin harness to the 19-foot extended connection cable. This cable is designed to run from the camera to the front of the vehicle where your display unit is located.
2. Conexión de energía:
   • For Rear Camera Use: Connect the red power wire from the camera's harness (or the extension cable, depending on your setup) to the vehicle's reverse light circuit (12V DC). This will power the camera when the vehicle is in reverse. Connect the black ground wire to a suitable chassis ground point.
   • For Front Camera Use or Constant Power: Connect the red power wire to a switched 12V accessory power source and the black ground wire to a chassis ground.
3. Salida de vídeo: Connect the yellow RCA video output from the 19-foot extension cable to the video input of your compatible display monitor or head unit.
4. Trigger Wire (Optional): If your display unit requires a trigger wire to automatically switch to the camera view when reversing, connect the small red wire often found alongside the RCA cable to the reverse light trigger input on your display unit.

4.3 Guideline Control

The camera features selectable parking guidelines. Consult the small loops on the camera's main wiring harness (or the extension cable, if applicable). Typically, cutting a specific loop will toggle the guidelines ON or OFF. Refer to the diagram provided with your specific wiring harness for exact instructions, as this can vary.

Figura 4.1: The camera's wiring, illustrating the 6-pin connector and the RCA video output. Note the small loops for guideline control.

5. Instrucciones de funcionamiento

Once properly installed, operating the NVX XCADJ1 camera is straightforward.

1. Automatic Activation (Rear Camera): If wired to the reverse light circuit, the camera will automatically power on and send a video signal to your display unit when the vehicle is shifted into reverse. Your display unit should then automatically switch to the camera view.
2. Manual Activation (Front Camera or Constant Power): If wired to a switched accessory power source, you may need to manually select the video input on your display unit to view la alimentación de la cámara.
3. Using Guidelines: If the parking guidelines are enabled during installation, they will appear on the screen to assist with judging distance and vehicle trajectory.

6. Mantenimiento

The NVX XCADJ1 camera is designed for durability and requires minimal maintenance.

• Limpieza de la lente: Limpie periódicamente la lente de la cámara con un paño suave.amp paño para eliminar la suciedad, el polvo o las manchas de agua que puedan obstruir el view. Evite limpiadores abrasivos o materiales que puedan rayar la lente.
• Inspeccionar el cableado: Occasionally check the wiring connections for any signs of wear, corrosion, or damage. Ensure all connections remain secure.
• Clasificación de impermeabilidad: The IP68 rating ensures protection against water and dust ingress. However, avoid directing high-pressure water jets directly at the camera for extended periods.

7. Solución de problemas

If you encounter issues with your NVX XCADJ1 camera, refer to the following common problems and solutions:

8. Especificaciones

9. Garantía y soporte

9.1 Información de garantía

Specific warranty details for the NVX XCADJ1 camera are typically provided at the point of purchase or on the manufacturer's official website. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the documentation included with your product or visit the NVX official websitio.

9.2 Atención al cliente

If you require further assistance with installation, operation, or troubleshooting that is not covered in this manual, please contact NVX customer support. Contact information can usually be found on the NVX websitio o a través de su minorista de productos.

You can visit the NVX Store for more information: NVX Official Store

10. Vídeos de productos

No relevant official product videos from the seller were found for this model.