Introducción
This manual provides essential information for the assembly, operation, maintenance, and troubleshooting of your Genesis Nitro 950 Gaming Chair. Please read these instructions carefully before assembly and use to ensure proper function and safety. Keep this manual for future reference.
Información de seguridad
- Asegúrese de que todos los componentes estén presentes y sin daños antes del montaje. No lo utilice si alguna pieza falta o está rota.
- Follow assembly instructions precisely. Incorrect assembly can lead to instability and injury.
- No se suba a la silla. Úsela solo para sentarse.
- No exceda la capacidad máxima de peso de 150 kg (330 lbs).
- Mantenga a los niños y mascotas alejados durante el montaje. Las piezas pequeñas pueden suponer un peligro de asfixia.
- Revise periódicamente todos los pernos y tornillos para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Evite exponer la silla a la luz solar directa o temperaturas extremas para evitar la degradación del material.
Contenido del paquete
Before beginning assembly, verify that all components are included in your package. While specific part names may vary, a typical gaming chair package includes:
- base del asiento
- Respaldo
- Apoyabrazos (2)
- Base estelar
- Ruedas (5)
- Cilindro de elevación de gas
- Tapa de elevación de gas
- Placa del mecanismo
- Cojín lumbar
- Cojín reposacabezas
- Kit de hardware (tornillos, arandelas, llave Allen)
Configuración y montaje
Assembly is required for this product. Follow these general steps for proper setup. Refer to the included assembly diagram for detailed visual guidance.
- Fije las ruedas a la base estelar: Insert each of the five casters into the holes at the end of the star base arms until they click securely into place.
- Insertar elevador de gas: Place the gas lift cylinder into the central hole of the star base. Cover the gas lift with the telescopic plastic cover.
- Placa del mecanismo de montaje: Align the mechanism plate with the screw holes on the underside of the seat base. Ensure the front of the mechanism (usually indicated by a label or the lever side) faces the front of the seat. Secure with screws and washers using the provided Allen key.
- Adjuntar reposabrazos: Secure the armrests to the sides of the seat base using the designated screws. Do not overtighten initially to allow for minor adjustments.
- Conecte el asiento al respaldo: Attach the backrest to the seat base using the side brackets and screws. Ensure proper alignment before tightening all screws firmly.
- Coloque el conjunto del asiento en el elevador de gas: Coloque con cuidado el asiento y el respaldo ensamblados sobre el cilindro de elevación de gas, asegurándose de que esté centrado y estable.
- Colocar cojines: Position the lumbar cushion and headrest cushion using their straps as desired for ergonomic support.
Instrucciones de funcionamiento
The Genesis Nitro 950 Gaming Chair offers several adjustment features to customize your seating experience.
1. Ajuste de la altura del asiento
To adjust the seat height, locate the lever on the right side, beneath the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up slightly and pull the lever up. Release the lever at the desired height to lock it in place.
2. Ajuste de la reclinación del respaldo
The backrest can be reclined up to 165 degrees. Locate the recline lever on the right side of the chair, near the seat. Pull the lever up to release the backrest lock, then lean back to the desired angle. Release the lever to lock the backrest in position.
3. Ajuste del reposabrazos
The armrests are four-way adjustable. Depending on the specific model, adjustments may include height, forward/backward, left/right swivel, and inward/outward angle. Locate the buttons or levers on the armrests to unlock and adjust them. Press or lift the control, move the armrest to the desired position, and release to lock.
4. Rocker and Locking Function (Frog Mechanism)
The chair is equipped with an advanced mechanism that allows for a rocking motion and the ability to lock the chair in any position. To enable rocking, pull out the lever located on the left side, beneath the seat. To disable rocking and lock the chair in an upright or reclined position, push the lever back in.
5. Lumbar and Headrest Cushion Positioning
The ergonomic headrest and lumbar cushion are filled with memory foam for comfort. Adjust their position by sliding them along the straps on the backrest to find optimal support for your neck and lower back.
Mantenimiento
Regular maintenance helps prolong the life and appearance of your Genesis Nitro 950 Gaming Chair.
- Limpieza: Limpiar con anuncioamp cloth. For ecological leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid abrasive cleaners or solvents.
- Sujetadores: Periodically check all screws and bolts, especially after initial assembly and every few months, to ensure they remain tight. Retighten as needed to maintain stability.
- Ruedas: Keep casters free of hair, dust, and debris to ensure smooth movement.
- Elevación de gas: Do not attempt to disassemble or repair the gas lift cylinder. It contains pressurized gas.
Solución de problemas
If you encounter issues with your Genesis Nitro 950 Gaming Chair, refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| Chair is unstable or wobbly | Loose screws or incorrect assembly | Check and tighten all assembly screws. Ensure the gas lift is fully seated in the star base and mechanism. |
| El ajuste de la altura del asiento no funciona | Gas lift issue or lever mechanism obstruction | Ensure the lever is fully engaged. Check for any obstructions. If the gas lift is faulty, it may need replacement (contact support). |
| El respaldo no se reclina ni se bloquea | La palanca de reclinación no está activada o hay una obstrucción del mecanismo | Ensure the recline lever is fully pulled or pushed to engage/disengage the lock. Check for obstructions around the mechanism. |
| Ruidos chirriantes | Conexiones sueltas o fricción entre piezas | Apriete todos los tornillos. Aplique una pequeña cantidad de lubricante de silicona a las piezas móviles o a los puntos de conexión si es necesario. |
| Las ruedas no giran con suavidad | Residuos en las ruedas | Retire el cabello, el polvo o los residuos de las ruedas giratorias. |
Presupuesto
Detailed specifications for the Genesis Nitro 950 Gaming Chair:
| Característica | Detalle |
|---|---|
| Marca | Génesis |
| Nombre del modelo | Nitro 950 |
| Número de modelo | NFG-1366 |
| Color | Negro |
| Material | Ecological Leather, Memory Foam (fill), Alloy Steel (frame) |
| Dimensiones del producto (Pr. x An. x Al.) | 34.25" x 27.95" x 14.37" (87 x 71 x 36.5 cm) |
| Peso del artículo | 28.72 kilogramos (aprox. 63.3 libras) |
| Recomendación de peso máximo | 150 kilogramos (aprox. 330 libras) |
| Ángulo de reclinación del respaldo | Hasta 165° |
| Tipo de apoyabrazos | Four-way adjustable |
| Mecanismo | Advanced rocker and locking function |
| Ruedas | Robust large wheels with brakes, plastic-coated for scratch-resistant surfaces |
| Requiere ensamblaje | Sí |
| Usos recomendados | Juegos, Oficina |
Información de garantía
For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact your retailer. Warranty coverage typically includes manufacturing defects for a specified period from the date of purchase.
Atención al cliente
If you require further assistance, have questions about your product, or need to report a missing or damaged part, please contact the retailer where you purchased the Genesis Nitro 950 Gaming Chair or visit the official Genesis websitio para obtener información de contacto de soporte.