Godox TT350N Speedlite Flash for Nikon DSLR Cameras User Manual

1. Introducción

Gracias por la compraasing the Godox TT350N Speedlite Flash. This compact and versatile flash unit is designed for Nikon DSLR cameras, offering full TTL functionality, high-speed sync, and a built-in 2.4G wireless X system. This manual provides detailed instructions for proper operation and maintenance to ensure optimal performance.

2. Información de seguridad

• Mantenga siempre este producto seco. No lo use bajo la lluvia o damp condiciones.
• No lo desmonte. Si necesita reparaciones, envíe este producto a un centro de mantenimiento autorizado.
• Mantener fuera del alcance de los niños.
• No utilice la unidad de flash en presencia de gases, productos químicos u otros materiales inflamables.
• Do not touch the flash head immediately after use, as it may be hot.
• Use only AA batteries as specified. Do not mix new and old batteries or different types of batteries.

3. Producto terminadoview

3.1 Características principales

• Funcionalidad TTL completa: Supports HSS (up to 1/8000s), FEC, front and rear curtain sync, multi-flash, and manual flash.
• Dot-Matrix LCD: Provides clear and simple operation with an intuitive display.
• Funciones potentes: Includes TTL autoflash, 1/8000 high-speed synchronization, flash exposure compensation, flash exposure lock, and modeling flash.
• Sistema de agrupación inalámbrica: Features a 2.4G wireless system with up to 5 groups and 32 channels to meet various shooting requirements.
• Protección contra sobrecalentamiento: Designed with protection against overheating for extended use.
• Rendimiento eficiente: Guide Number (GN) of 36 (m ISO 100, @ 105mm), 22 power outputs (1/1-1/128). Recycling time between 0.1 and 2.2 seconds, providing approximately 210 full power flashes with 2500mA Ni-MH batteries.
• Función de zoom: Automatic and manual zoom from 24mm to 105mm.
• Personal Function Settings (C.Fn): Customizable settings for personalized operation.
• Amplia compatibilidad: Can act as a master unit to control other Godox slave units (AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, TT600) or as a slave unit triggered by Godox master units (X1T-N, V860IIN, V850II, TT685N, TT600).

3.2 Contenido del paquete

• 1 x Godox TT350N Flash Unit
• 1 x Mini soporte
• 1 x Funda protectora
• Filtro de color 1x
• 1 x Manual de usuario
• 1 x VFOTO Lens Cleaning Cloth

Image: The Godox TT350N flash unit, mini stand, protective case, color filter, user manual, and lens cleaning cloth are included in the package.

3.3 Nombres y funciones de las piezas

Image: Detailed diagram showing the various parts of the Godox TT350N flash and their corresponding functions.

1. Zoom Selection Button
2. Botón de selección de modo
3. Custom Function Setting Button (reusable button, long press for 2 seconds)
4. Botón de prueba / indicador de flash listo
5. Panel LCD
6. Botón de sincronización de alta velocidad
7. S1/S2 Optic Slave Triggering Selection Button (in non-wireless mode)
8. Group/Channel Button (reusable button, in wireless mode)
9. Interruptor de encendido
10. Anillo de bloqueo
11. Botón de selección inalámbrico (botón reutilizable, pulsación larga durante 2 segundos)
12. Zapata
13. Botón de ajuste
14. Seleccione Marcar
15. Compartimento de la batería
16. Sensor de control óptico
17. Haz de asistencia de enfoque
18. Cabeza de flash
19. Panel de reflectores
20. Panel ancho incorporado

4. Configuración

4.1 Instalación de la batería

The Godox TT350N uses two AA batteries. Ni-MH batteries are recommended for optimal performance and recycling time. Alkaline batteries (LR6) can also be used.

1. Abra la tapa del compartimiento de la batería ubicada en el costado de la unidad de flash.
2. Inserte dos pilas AA de acuerdo con los indicadores de polaridad (+/-) dentro del compartimento.
3. Cierre bien la tapa del compartimento de la batería.

4.2 Montaje en la cámara

To mount the flash unit onto your camera's hotshoe:

1. Loosen the lock ring on the flash unit by turning it counter-clockwise.
2. Slide the flash's hotshoe fully into your camera's hotshoe mount.
3. Tighten the lock ring by turning it clockwise until the flash is securely attached to the camera.

Image: The Godox TT350N flash unit showing its hotshoe for mounting onto a camera.

4.3 Encendido y apagado

• To power on, slide the Power Switch to the 'ON' position. The flash will begin charging, and the red flash ready indicator will light up when ready.
• Para apagar, deslice el interruptor de encendido a la posición 'APAGADO'.

5. Modos de funcionamiento

The TT350N offers various flash modes to suit different shooting scenarios. Press the MODO Botón para recorrer los modos disponibles.

5.1 Modo de flash automático TTL

In TTL mode, the flash output is automatically adjusted by the camera to achieve correct exposure. This mode is ideal for quick shooting and changing light conditions.

• Presione el MODO button until 'TTL' is displayed on the LCD panel.
• The flash will automatically adjust its output based on the camera's metering.

5.2 Modo de flash manual (M)

Manual mode allows you to set the flash output power manually from 1/1 (full power) to 1/128 in 1/3 stop increments. This provides precise control over lighting.

• Presione el MODO button until 'M' is displayed.
• Girar el Seleccione Marcar to adjust the flash output power.

5.3 Multi Flash Mode (Multi)

Multi flash mode (stroboscopic flash) fires a series of rapid flashes during a single exposure, creating multiple images of a moving subject in one frame.

• Presione el MODO Botón hasta que se muestre 'Multi'.
• Utilice el Seleccione Marcar y COLOCAR button to adjust the flash frequency (Hz), number of flashes, and flash output.

5.4 Sincronización de alta velocidad (HSS)

High-Speed Sync allows the flash to synchronize with all camera shutter speeds, up to 1/8000s. This is useful for shooting with wide apertures in bright conditions or freezing fast motion.

• Presione el SINCRONIZACIÓN Botón para activar el HSS. El icono del HSS aparecerá en la pantalla LCD.

5.5 Sincronización de primera y segunda cortina

First curtain sync fires the flash at the beginning of the exposure. Second curtain sync fires the flash just before the shutter closes, creating a trail of light behind moving subjects.

• These settings are typically controlled via your camera's flash menu. Refer to your camera's manual for specific instructions.

5.6 Compensación de la exposición del flash (FEC)

FEC allows you to fine-tune the flash output in TTL mode, making the flash brighter or darker by up to ±3 stops in 1/3 stop increments.

• En el modo TTL, presione el botón COLOCAR button. The FEC value will blink.
• Girar el Seleccione Marcar to adjust the FEC value.
• Presione el COLOCAR Botón nuevamente para confirmar.

5.7 Modeling Flash

The modeling flash fires a brief burst of light to help you preview the lighting effect before taking the actual shot.

• Press the camera's depth-of-field preview button (if available) to activate the modeling flash.

6. Wireless Flash Function

The TT350N supports both 2.4G wireless transmission and optical transmission for off-camera flash control.

6.1 2.4G Wireless Transmission (Master/Slave)

The built-in Godox 2.4G wireless X system allows the TT350N to function as a master or slave unit, controlling or being controlled by other compatible Godox flashes and triggers.

Image: Illustration of the TT350N operating as both a master and slave unit within the Godox 2.4G wireless system.

• Unidad maestra: The TT350N can control other Godox slave units such as AD600, AD600M, AD360II-C, AD360II-N, V860IIN, V850II, TT685N, and TT600.
• Unidad esclava: The TT350N can be controlled by Godox master units like X1T-N, V860IIN, V850II, TT685N, and TT600.
• To activate wireless mode, long press the GR/CH button (Wireless Selection Button) for 2 seconds.
• Utilice el GR/CH botón y Seleccione Marcar to set the group (A, B, C) and channel (1-16).
• Asegúrese de que todas las unidades estén configuradas en el mismo canal y grupo para una comunicación adecuada.

6.2 Optical Transmission (S1/S2 Slave)

The TT350N can also function as an optical slave, triggered by another flash unit's light pulse.

• Modo S1: The flash will fire in response to the first flash from a master flash. This mode is suitable for manual flash environments.
• Modo S2: The flash will ignore the pre-flash from a master TTL flash and fire in response to the second flash. This mode is suitable for TTL master flashes.
• To activate S1 or S2 mode, press the ESCLAVO button (S1/S2 Optic Slave Triggering Selection Button) until 'S1' or 'S2' is displayed.

7. C.Fn Custom Functions

The TT350N features customizable functions (C.Fn) that allow you to tailor the flash's behavior to your preferences.

• Mantenga pulsado el C.Fn button for 2 seconds to enter the custom function settings menu.
• Utilice el Seleccione Marcar to navigate through the available functions.
• Presione el COLOCAR button to select a function and then use the Seleccione Marcar para cambiar su valor.
• Presione el COLOCAR button again to confirm the change.
• Mantenga pulsado el C.Fn button again to exit the custom function settings.

8. Mantenimiento

• Clean the flash unit regularly with a soft, dry cloth. Avoid using solvents or harsh chemicals.
• Remove batteries when the flash is not in use for an extended period to prevent leakage.
• Guarde el flash en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
• Evite impactos fuertes o dejar caer la unidad.

9. Solución de problemas

• El flash no se dispara: Check battery level, ensure flash is securely mounted, verify camera flash settings, and confirm flash is powered on and ready.
• Flash output is too dark/bright: Adjust FEC (Flash Exposure Compensation) in TTL mode or manual power output in M mode. Check camera ISO and aperture settings.
• Problemas de activación inalámbrica: Ensure master and slave units are on the same channel and group. Check distance and line of sight for optical triggering. Verify battery levels in all units.
• Flash head does not rotate/tilt smoothly: Do not force movement. If resistance is felt, check for obstructions or contact customer support.

10. Especificaciones

11. Garantía y soporte

Godox products are manufactured to high standards and are guaranteed against manufacturing defects. For warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or visit the official Godox webSitio web. Conserve su comprobante de compra para reclamaciones de garantía.