Introducción
Thank you for choosing the Pro-Ject Primary E Phono Turntable. This manual provides essential information for the proper setup, operation, and maintenance of your new turntable. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.
The Primary E Phono is designed to deliver high-fidelity audio playback from your vinyl records, featuring a built-in phono stage, an 8.6-inch aluminum tonearm, and a pre-mounted Ortofon OM NN cartridge, all housed in a matte black finish.
Instrucciones de seguridad importantes
- Lea estas instrucciones. Consérvelas. Preste atención a todas las advertencias. Siga todas las instrucciones.
- No utilice este aparato cerca del agua.
- Limpiar únicamente con un paño seco.
- No obstruya las aberturas de ventilación. Instale el producto según las instrucciones del fabricante.
- No lo instale cerca de fuentes de calor como radiadores, rejillas de calefacción, estufas u otros aparatos (incluidos ampificadores) que producen calor.
- Proteja el cable de alimentación para que no sea pisado ni aplastado, especialmente en los enchufes, receptáculos y en el punto donde sale del aparato.
- Utilice únicamente accesorios especificados por el fabricante.
- Desenchufe este aparato durante tormentas eléctricas o cuando no lo utilice durante períodos prolongados.
- Encargue todas las tareas de mantenimiento a personal técnico cualificado. Se requiere realizar el mantenimiento cuando el aparato haya sufrido algún daño, como por ejemplo si el cable de alimentación o el enchufe están dañados, si se ha derramado líquido o han caído objetos en el interior del aparato, si el aparato ha estado expuesto a la lluvia o la humedad, si no funciona con normalidad o si se ha caído.
¿Qué hay en la caja?
Al desembalar, asegúrese de que todos los siguientes componentes estén presentes y en buenas condiciones:
- Pro-Ject Primary E Phono Turntable Unit
- Guardapolvo
- Plato
- Correa de transmisión
- Premounted Ortofon OM NN Cartridge
- Fuente de alimentación
- Cable de audio RCA
Image: The Pro-Ject Primary E Phono Turntable, showcasing its matte black finish, platter, and tonearm assembly, without the dust cover attached.
Configuración
1 Colocación
Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and strong vibrations. Ensure there is enough space around the unit for ventilation and operation of the dust cover.
2. Instalación del plato y la correa
- Carefully place the platter onto the spindle.
- Localice la correa de transmisión. Estírela suavemente alrededor del borde interior del plato y luego alrededor de la polea del motor. Asegúrese de que la correa no esté torcida.
Imagen: Un primer plano view of the turntable's motor pulley and the drive belt correctly installed around it, connecting to the platter.
3. Brazo y cartucho
The Ortofon OM NN cartridge is pre-mounted and aligned at the factory. No further adjustment is typically required for initial setup. Ensure the stylus guard is removed before playing a record.
Image: A detailed shot of the tonearm base, showing the pivot point and cueing lever mechanism.
Image: A close-up of the Ortofon OM NN cartridge with its stylus resting on the grooves of a vinyl record.
4. Conexiones de audio
The Primary E Phono features a built-in phono preamplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. It also has a switch to bypass the internal phono stage if you prefer to use an external one.
- Connect the supplied RCA audio cable from the turntable's output jacks to an available input on your amplifier (e.g., "AUX", "CD", "Line In").
- Ensure the "PHONO OUT / LINE OUT" switch on the rear of the turntable is set correctly:
- Empezar a LINE OUT if connecting to a standard line-level input (using the internal phono stagmi).
- Empezar a SALIDA DE TELÉFONO Si se conecta a un amplifier with a dedicated phono input (bypassing the internal phono stagmi).
Image: The rear panel of the turntable showing the RCA output jacks and the switch for selecting between PHONO OUT and LINE OUT.
5. Conexión de alimentación
Connect the power supply cable to the DC input on the turntable and then plug the power adapter into a suitable wall outlet.
6. Cubierta antipolvo
Attach the dust cover to the hinges at the rear of the turntable. The dust cover protects the turntable from dust and debris when not in use.
Image: The Pro-Ject Primary E Phono Turntable with its clear dust cover in the open position, ready for use.
Instrucciones de funcionamiento
1. Encendido / apagado
The turntable is powered on by plugging it into the mains. There is no separate power switch. To turn off, unplug the power supply.
2. Reproducción de un disco
- Coloque un disco en el plato.
- Select the correct playback speed (33 or 45 RPM) using the speed selector switch located on the top left of the plinth.
- Levante el brazo fonocaptor utilizando la palanca de señalización.
- Coloque con cuidado el brazo sobre el surco inicial deseado del disco.
- Baje suavemente el brazo fonocaptor usando la palanca de apoyo. La aguja descenderá sobre el disco y comenzará la reproducción.
3. Detener la reproducción
- Levante el brazo fonocaptor utilizando la palanca de señalización.
- Devuelva el brazo a su lugar y asegúrelo con el clip del brazo.
- Retire el disco del plato.
Mantenimiento
1. Limpieza del plato giratorio
- Desenchufe siempre el plato giratorio de la toma de corriente antes de limpiarlo.
- Use a soft, dry, lint-free cloth to clean the plinth and dust cover. Avoid abrasive cleaners or solvents.
- For the platter, use a slightly damp Paño si es necesario y luego séquelo completamente.
2. Cuidado del lápiz
- Limpie periódicamente el lápiz óptico utilizando un cepillo suave diseñado para la limpieza de lápices ópticos, cepillando suavemente de atrás hacia adelante.
- Evite tocar el lápiz con los dedos.
- Replace the stylus when signs of wear are apparent (e.g., distorted sound, increased surface noise).
3. Correa de transmisión
Periodically inspect the drive belt for any signs of wear, stretching, or cracking. A worn belt can affect playback speed stability. Replace the belt if necessary.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Sin poder | Cable de alimentación no conectado; toma de corriente no activa. | Verifique las conexiones eléctricas; pruebe con una toma de corriente diferente. |
| Sin sonido o volumen bajo | Entrada incorrecta seleccionada en amplifier; PHONO/LINE switch incorrect; loose RCA cables; damaged stylus. | Select correct input; ensure PHONO/LINE switch matches connection; check RCA cables; inspect stylus. |
| Sonido distorsionado | Dirty or worn stylus; incorrect tracking force (less likely with pre-set); dirty record. | Clean or replace stylus; clean record. |
| Speed fluctuations | Worn or stretched drive belt; motor pulley dirty. | Inspect and replace drive belt if necessary; clean motor pulley. |
Presupuesto
| Característica | Detalle |
|---|---|
| Dimensiones del producto | 12.99 x 16.54 x 4.41 pulgadas |
| Peso del artículo | 8.8 libras (4 kilogramos) |
| Número de modelo del artículo | Primary E Phono UNI |
| Marca | Proyecto |
| Velocidad máxima de rotación | 45 RPM |
| Componentes incluidos | Dust Cover, Platter, Premounted OM NN Cartridge |
| Material | Aluminum, Engineered Wood |
| Color | Negro mate |
| Dispositivos compatibles | Integrado Amp con fono Stage, Phono Preamp |
| Consumo de energía en modo encendido | 4.50 vatios |
Garantía y soporte
Pro-Ject Audio Systems products are manufactured to the highest standards and undergo strict quality control. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject Audio Systems websitio.
For technical support or service inquiries, please contact your authorized Pro-Ject dealer or distributor. Do not attempt to service the unit yourself.
Puede encontrar más información y recursos de apoyo en Pro-Ject Store on Amazon.