Introducción
Welcome and thank you for choosing the MOUNTUP Full Motion TV Wall Mount. This manual provides essential information for the safe and correct installation, operation, and maintenance of your TV wall mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Información de seguridad
Observe siempre las siguientes precauciones de seguridad durante la instalación y el uso:
- Capacidad de peso: No exceda el peso máximo de 88 lb (40 kg). La sobrecarga puede causar lesiones graves o daños materiales.
- Estructura de la pared: Ensure the mounting surface (wall) can safely support the combined weight of the mount and the television.
- Listado UL: This product is UL Listed, indicating it meets specific safety standards.
- Asistencia profesional: Si no está seguro de alguna parte del proceso de instalación, consulte a un profesional calificado.
- Niños: Mantenga a los niños alejados del área de instalación durante la configuración.
- Herramientas: Use appropriate tools and follow all instructions for their safe operation.
Contenido del paquete
Before installation, verify that all components are present and undamaged. If any parts are missing or defective, contact MOUNTUP customer service.
- Conjunto de placa de pared
- Soportes de TV (2 piezas)
- Varios tornillos para TV (M4, M6, M8)
- Espaciadores y arandelas
- Lag Bolts and Concrete Anchors (for specific wall types)
- Nivel de burbuja
- Llave inglesa
- Plantilla de instalación
Presupuesto
| Número de modelo | 28XTu2564 |
| Marca | MONTAJE |
| Compatibilidad de tamaño de TV | 26 a 65 pulgadas |
| Capacidad de peso | 88 libras (40 kg) |
| Compatibilidad VESA | Min: 75x75mm (3"x3"), Max: 400x400mm (16"x16") |
| Compatibilidad de tipos de pared | 16" Wood Studs (Not for alone dry wall application). Concrete/Brick walls require anchors. |
| Ángulo de inclinación | +5° / -13° |
| Ángulo de giro | ±45° (Maximum swivel angle depends on TV size) |
| Ajuste de nivel | ±3° (Post-installation) |
| Distancia de la pared | 3" a 15.7" |
| Material | Acero aleado |
Configuración e instalación
Comprobaciones previas a la instalación
Before you begin, it is crucial to confirm compatibility and prepare your installation area.
- Compruebe el patrón VESA del televisor: Localice los cuatro orificios de montaje en la parte posterior de su televisor y mida la distancia horizontal y vertical entre ellos. Este soporte admite patrones VESA de 75 x 75 mm a 400 x 400 mm.
- Check TV Weight and Size: Ensure your TV weighs no more than 88 lbs (40 kg) and is between 26 and 65 inches.
- Check Wall Type: This mount is designed for installation on 16-inch wood studs. For concrete or brick walls, specific anchors (included) are required. No lo instale únicamente sobre paneles de yeso.
Figure 1: Compatible Wall Types. The mount is suitable for 16-inch wood studs, concrete walls, and brick walls. Anchors are required for concrete and brick installations.
Figure 2: TV Size and VESA Compatibility. This mount fits TVs from 26 to 65 inches with VESA patterns ranging from 75x75mm to 400x400mm.
Pasos de instalación
Follow these steps carefully for a secure installation. The main part of the TV mount is pre-assembled for convenience.
Figura 3: Sobreview of the 3-Step Easy Installation Process.
Paso 1: coloque los soportes en el televisor
- Coloque con cuidado el televisor boca abajo sobre una superficie suave y limpia para evitar dañar la pantalla.
- Alinee los soportes del televisor con los orificios de montaje en la parte posterior del televisor.
- Seleccione los tornillos, arandelas y espaciadores adecuados del kit de hardware que se ajusten a los orificios de montaje de su televisor.
- Fije firmemente los soportes al televisor con un destornillador. No los apriete demasiado.
Paso 2: fije la placa de pared a la pared
- Determine la altura y ubicación deseada para su televisor.
- Use a stud finder to locate the center of two adjacent wood studs (16-inch spacing). Mark the pilot hole locations.
- For concrete or brick walls, use a drill to create pilot holes at the marked locations and insert the appropriate anchors.
- Position the wall plate against the wall, aligning the holes with your marks. Use the included bubble level to ensure it is perfectly horizontal.
- Secure the wall plate to the wall using the lag bolts (for wood studs) or anchors and bolts (for concrete/brick). Tighten all bolts firmly.
Figure 4: Stud Spacing Compatibility. Ensure your wall studs align with the mount's design for secure installation.
Paso 3: Cuelgue y fije el televisor a la placa de pared
- Con ayuda, levante con cuidado el televisor con los soportes adjuntos y engánchelos en la placa de pared.
- Asegúrese de que el televisor esté colocado de forma segura en la placa de pared.
- Locate the safety screws or locking mechanisms on the bottom of the TV brackets and tighten them to prevent accidental dislodging.
Instrucciones de funcionamiento
This full motion TV mount allows for flexible adjustment of your TV's position to achieve optimal viewángulos de ing.
Ajuste Viewángulo de ing
- Inclinación: The mount allows for a tilt range of +5° (upward) to -13° (downward). Gently push or pull the top or bottom of your TV to adjust the vertical angle. This helps reduce glare from lights or windows and prevents neck strain.
Figure 5: Tilt Adjustment. Adjust the TV's vertical angle to minimize glare and enhance viewing comodidad.
- Girar: The articulating arm allows the TV to swivel up to ±45° left or right. The maximum swivel angle depends on the size of your TV and its distance from the wall. Gently push the TV to the desired horizontal angle.
Figure 6: Swivel Adjustment. Reposition your TV horizontally for optimal viewprovenientes de diferentes zonas de la habitación.
- Extensión: The mount can extend your TV from 3 inches (retracted) to 15.7 inches (extended) from the wall. Pull the TV gently forward or push it back towards the wall.
- Arrasamiento: After installation, you can make minor horizontal adjustments of ±3° to ensure your TV is perfectly level. This adjustment is typically done by loosening specific bolts on the TV brackets, adjusting, and then re-tightening. Refer to the detailed PDF manual for specific instructions.
Figure 7: Post-Installation Leveling. Fine-tune the TV's horizontal alignment after mounting.
Mantenimiento
El mantenimiento regular ayuda a garantizar la longevidad y el funcionamiento seguro de su soporte de pared para TV.
- Limpieza: Limpie el soporte con un paño suave y seco para eliminar el polvo. Evite usar limpiadores abrasivos o disolventes.
- Controles periódicos: Revise periódicamente todos los tornillos y pernos para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Movimiento: If the mount's movement becomes stiff, a small amount of silicone-based lubricant can be applied to the articulating joints.
Solución de problemas
Si encuentra problemas durante o después de la instalación, considere las siguientes soluciones comunes:
- TV no nivelada: Use the post-installation leveling feature (±3°) as described in the Operating Instructions. Ensure the wall plate was installed level initially.
- El monte se siente suelto: Re-check all wall mounting bolts and TV bracket screws for tightness. Ensure the wall type is appropriate and anchors (if used) are correctly installed.
- Dificultad de adaptación: Ensure no cables are snagged or obstructing movement. If joints are stiff, apply a small amount of lubricant.
- Partes faltantes: Refer to the Package Contents section. If parts are missing, contact MOUNTUP customer service.
Garantía y soporte
MOUNTUP TV wall mount series are backed by a Plan de protección de 3 años. Our dedicated customer support team is available to answer any questions you may have regarding installation, operation, or product issues.
For further assistance or detailed diagrams, please refer to the official installation manual: