Homra Nexo 72L Sensor Waste Separation System

1. Producto terminadoview

The Homra Nexo 72L Sensor Waste Separation System is designed for efficient waste management with its multi-compartment structure and automatic sensor lid. This manual provides essential information for the proper setup, operation, and maintenance of your waste separation system.

Image 1.1: Homra Nexo 72L Waste Separation System

2. Instrucciones de configuración

2.1 Desembalaje e inspección

• Retire con cuidado todos los componentes del embalaje.
• Verify that all parts are present and undamaged. Refer to the packing list for a complete inventory.

2.2 Instalación de la batería

The sensor lid requires 6 AA batteries for operation. Ensure correct polarity when inserting the batteries.

1. Localice el compartimiento de la batería en la parte inferior de la tapa.
2. Abra la tapa del compartimiento de la batería.
3. Insert 6 AA batteries, observing the polarity markings (+/-).
4. Cierre bien la tapa del compartimento de la batería.

2.3 Colocación

Position the waste separation system on a flat, stable surface. The unit is suitable for various indoor environments such as kitchens, living rooms, or offices.

Image 2.1: Anti-slip feet ensure stability

3. Instrucciones de funcionamiento

3.1 Sensor Lid Operation (Upper Compartment)

The large upper compartment features an automatic sensor lid for hygienic, touch-free operation.

1. To open the lid, place your hand approximately 10-15 cm above the sensor located on the front of the lid.
2. La tapa se abrirá automáticamente.
3. After a few seconds of inactivity, the lid will close automatically.
4. For manual control, use the 'OPEN' and 'CLOSE' buttons next to the sensor. Press 'OPEN' to keep the lid open, and 'CLOSE' to close it.

Image 3.1: Sensor and manual control buttons

Image 3.2: Hands-free sensor operation

3.2 Lower Compartment Operation

The lower compartment can be opened manually by pulling the drawer handle. It is equipped with wheels for smooth operation.

3.3 Waste Separation

The system is designed for efficient waste separation with multiple compartments:

• Upper Compartment (48 Litres): Ideal for general waste or recyclables. An inner ring secures the garbage bag in place. A 4-litre collection tray for green waste can be used here.
• Lower Compartment (2 x 12 Litres): Contains two separate inner containers, suitable for different types of recyclables such as plastic, paper, or glass. These containers are designed for standard 15-litre rubbish bags.

Image 3.3: Multi-compartment design for waste separation

Image 3.4: Soft-close lid mechanism

4. Mantenimiento

4.1 Limpieza

The Homra Nexo is made from dirt-repellent and fingerprint-proof stainless steel, making it easy to clean.

• Limpie el exterior con un paño suave y seco.amp Paño y detergente suave.
• Evite los limpiadores abrasivos o productos químicos fuertes, ya que pueden dañar el acabado.
• The inner bins can be removed and washed with soap and water. Ensure they are completely dry before placing them back into the unit.

Image 4.1: Fingerprint-free stainless steel finish

4.2 Reemplazo de batería

If the sensor lid becomes unresponsive or slow, it may be time to replace the batteries. Follow the steps in Section 2.2 for battery installation.

5. Solución de problemas

• Lid not opening/closing automatically:
  • Compruebe que las baterías estén correctamente instaladas y tengan suficiente carga. Reemplácelas si es necesario.
  • Ensure there are no obstructions blocking the sensor or the lid's movement.
  • Clean the sensor area to remove any dust or debris.
• Lid making unusual noises:
  • Ensure the lid mechanism is clean and free from debris.
  • Do not force the lid open or closed manually when the sensor is active.
• Lower drawer not sliding smoothly:
  • Check for any debris or obstructions under the wheels.
  • Asegúrese de que la unidad esté sobre una superficie nivelada.

6. Especificaciones

Imagen 6.1: Dimensiones y capacidades del producto

7. Garantía y soporte

For warranty information or technical support, please contact the manufacturer, Homra, or your retailer. Keep your purchase receipt as proof of purchase.