Antari WTR-20

Antari WTR-20 Wireless Remote Kit Instruction Manual

For Models: AF-4R, FT-20, S-500, S-500XL, Z-380

Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of the Antari WTR-20 Wireless Remote Kit. This kit is designed to provide wireless control for compatible Antari fog, haze, and snow machines, enhancing operational flexibility.

Producto terminadoview

The Antari WTR-20 Wireless Remote Kit consists of two main components: a handheld wireless transmitter (remote) and a receiver unit. The receiver connects to your compatible Antari machine, allowing the transmitter to send commands wirelessly.

Antari WTR-20 Wireless Remote Kit showing the handheld remote and the receiver unit

Imagen 1: The Antari WTR-20 Wireless Remote Kit. On the left is the silver-colored handheld remote control with four circular buttons labeled A, B, C, and D, and a blue indicator light. On the right is the black receiver unit with a white multi-pin connector at its base, designed to plug into a compatible Antari machine.

Configuración

1. Comprobación de compatibilidad

Ensure your Antari machine is compatible with the WTR-20 kit. This kit is designed for use with Antari models: AF-4R, FT-20, S-500, S-500XL, Z-380.

2. Instalación del receptor

  1. Apagado: Before connecting the receiver, ensure your Antari machine is powered off and unplugged from the main power supply.
  2. Locate Remote Port: Identify the remote control input port on your Antari machine. This is typically a multi-pin connector.
  3. Conectar el receptor: Carefully align the receiver's connector with the machine's remote port and push it firmly into place. Do not force the connection.
  4. Receptor seguro: If applicable, use any provided mounting hardware or integrated clips to secure the receiver unit to the machine, preventing accidental disconnection.

3. Encender

Plug your Antari machine back into the power supply and turn it on. The receiver unit should power on automatically, indicated by an LED light (if present).

Instrucciones de funcionamiento

The WTR-20 remote provides basic control functions for your compatible Antari machine. Specific functions of buttons A, B, C, and D may vary slightly depending on the connected machine model. Refer to your machine's specific manual for detailed button assignments.

  • Botón A: Typically activates continuous output or a primary function.
  • Botón B: Often used for momentary output or a secondary function.
  • Botón C: May control output duration or other programmable settings.
  • Botón D: Can be assigned to a specific effect, timer, or other auxiliary function.

When a button is pressed, the blue indicator light on the remote will illuminate, confirming signal transmission. Ensure the remote is within operational range of the receiver for reliable control.

Mantenimiento

Battery Replacement (Remote)

The handheld remote is powered by a small battery, typically a 12V A27 or similar. If the blue indicator light does not illuminate or the remote's range decreases significantly, the battery may need replacement.

  1. Localice el compartimiento de la batería en la parte posterior o lateral del control remoto.
  2. Abra el compartimento utilizando un destornillador pequeño o deslizando la tapa.
  3. Retire la batería vieja e inserte una nueva, asegurándose de la polaridad correcta (+/-).
  4. Cierre bien el compartimento de la batería.

Limpieza

Wipe the remote and receiver with a soft, dry cloth. Do not use abrasive cleaners or allow liquids to enter the units.

Solución de problemas

ProblemaPosible causaSolución
El control remoto no responde.Low or dead battery in remote. Out of range. Receiver not connected or powered.Replace remote battery. Move closer to the receiver. Ensure receiver is securely connected and machine is powered on.
Rango operativo reducido.Weak remote battery. Obstructions between remote and receiver. Interference.Replace remote battery. Ensure clear line of sight. Avoid operating near strong radio frequency sources.
Machine does not respond to any remote command.Incorrect receiver connection. Incompatible machine. Machine fault.Verify receiver is correctly and fully inserted. Confirm machine model is listed as compatible. Test machine with a wired remote if available, or contact Antari support.

Presupuesto

  • Modelo: WTR-20
  • Tecnología de conectividad: Radio Frequency
  • Número máximo de dispositivos compatibles: 1 (per receiver)
  • Dispositivos compatibles: Antari AF-4R, FT-20, S-500, S-500XL, Z-380
  • Remote Feature: Diseño ergonómico
  • Peso del artículo: Approximately 10 pounds (for the kit, including packaging)
  • Fabricante: miembro

Garantía y soporte

For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official Antari website. For technical support, service, or parts inquiries, please contact your authorized Antari dealer or Antari customer service directly.

Antari Official Websitio: www.antari.com

© 2023 Antari. All rights reserved. Information subject to change without notice.

Documentos relacionados - WTR-20

Preview Antari FT-20X Fire Training Fog Machine Manual del usuario
Manual de usuario de la máquina de niebla para entrenamiento contra incendios Antari FT-20X, que proporciona instrucciones detalladas sobre seguridad, configuración, funcionamiento, control DMX, operación remota, mantenimiento y especificaciones técnicas.
Preview Manual de usuario de Antari Z-390 Fazer
Manual de usuario completo para la máquina de niebla Antari Z-390 Fazer, que cubre información de seguridad, configuración, funcionamiento, mantenimiento y especificaciones técnicas.
Preview Control remoto inalámbrico Antari WTR-20: instalación y funcionamiento del transmisor y el receptor
Guía para la instalación y el uso del control remoto inalámbrico Antari WTR-20, incluidas las funciones del transmisor e instrucciones de emparejamiento del receptor para las máquinas de niebla Z-1500 III y Z-3000 III.
Preview Coastal Bronze 20-312-S Active Band Hinge - 12" Spear Specifications
Technical specifications and installation details for the Coastal Bronze 20-312-S 12-inch Spear Active Band Hinge, including weight load capacities, compatible pintles, and included hardware.
Preview Mountfield E 300/340/380 Li 20 Series Battery Lawnmower Operator's Manual
Official operator's manual for Mountfield E 300 Li 20, E 340 Li 20, and E 380 Li 20 series battery-powered walk-behind lawnmowers. Includes instructions for assembly, operation, safety, and maintenance.
Preview Manual del usuario de la máquina de niebla Antari FT-20X: seguridad y desembalaje
Manual de usuario de la máquina de niebla Antari FT-20X, que cubre información de seguridad esencial, precauciones de funcionamiento e instrucciones de desembalaje para un uso seguro y eficaz.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.