Manual de usuario del chasis para juegos de torre media Phanteks Evolv X2

Introducción

This manual provides detailed instructions for the Phanteks Evolv X2 Mid-Tower Gaming Chassis. Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance of your system.

Imagen: Frontal view of the Phanteks Evolv X2 Mid-Tower Gaming Chassis, showcasing sus paneles de vidrio templado y estructura interna.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de continuar con la instalación:

• Phanteks Evolv X2 Chassis
• Accessory Box (screws, zip ties, manual)
• D-RGB Lighting Cables
• Hardware de montaje adicional

Configuración e instalación

Follow these steps for proper installation of your components into the Phanteks Evolv X2 chassis.

1. Preparación del chasis

Carefully remove the tempered glass panels. Refer to the accessory box for specific instructions on panel removal to prevent damage.

Imagen: interna view of the Phanteks Evolv X2 chassis, showing the spacious layout for component installation.

2. Instalación de la placa base

The Evolv X2 supports ATX, Micro ATX, and Mini ITX motherboards. Install standoffs as required for your motherboard form factor. Secure the motherboard using the provided screws.

This chassis also supports ATX rear-connect mainboards, which can simplify cable management by routing connections to the rear of the motherboard tray.

Image: Close-up of the motherboard tray within the Phanteks Evolv X2, highlighting mounting points and cable routing options.

3. Instalación de la fuente de alimentación

The power supply unit (PSU) is mounted at the front of the chassis. Secure the PSU using the provided screws.

4. Instalación de la unidad de almacenamiento

Install your 2.5-inch and 3.5-inch storage drives into the designated bays. Refer to the accessory box for specific mounting hardware and locations.

5. Configuración del sistema de enfriamiento

The Evolv X2 features a vertical cooling system designed for optimal airflow. It supports:

• Bottom Intake: Triple 120mm fan positions for air intake.
• Top Exhaust: Triple 120mm fan positions with dedicated 360mm radiator clearance for exhaust.
• Escape trasero: One 120mm fan position.

Ensure fans are oriented correctly for intake and exhaust to maintain efficient airflow.

Imagen: View of the bottom fan mounting positions in the Phanteks Evolv X2, designed for air intake.

Imagen: Arriba view of the Phanteks Evolv X2, showing the fan and radiator mounting area for exhaust.

Image: Diagram illustrating the vertical airflow path within the Phanteks Evolv X2 chassis, with air entering from the bottom and exiting from the top.

6. Instalación de la tarjeta gráfica

Install your graphics card into the appropriate PCIe slot on your motherboard. Ensure it is securely fastened. The chassis provides ample space for high-end GPUs up to 380mm in length.

Imagen: interna view of the Phanteks Evolv X2, showcasing a graphics card installed and integrated D-RGB lighting.

7. Gestión de cables

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics. The design supports ATX rear-connect mainboards for a cleaner setup.

Image: A fully assembled Phanteks Evolv X2 system demonstrating effective cable management and component layout.

8. D-RGB Lighting Connection

Connect the integrated D-RGB lighting cables to your motherboard's D-RGB header or a compatible D-RGB controller. Refer to your motherboard manual for specific D-RGB header locations.

Instrucciones de funcionamiento

Once all components are installed and connected, replace the tempered glass panels. Connect your peripherals and power cable, then power on your system.

The integrated D-RGB lighting can be controlled via compatible motherboard software or an external D-RGB controller, allowing for customization of lighting effects and colors.

Mantenimiento

Regular maintenance helps ensure the longevity and performance of your chassis and components.

• Filtros de polvo: Periodically clean the dust filters located at the intake points (e.g., bottom of the chassis) to maintain optimal airflow and prevent dust buildup inside the system.
• Paneles de vidrio templado: Clean the tempered glass panels with a soft, lint-free cloth and a non-abrasive glass cleaner. Avoid harsh chemicals that may damage the glass or coatings.
• Limpieza interior: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.

Solución de problemas

Esta sección aborda problemas comunes que podrías encontrar.

• El sistema no se enciende:
  • Verify all power cables are securely connected to the motherboard, graphics card, and power supply.
  • Asegúrese de que el interruptor de alimentación esté en la posición "ON".
  • Check front panel header connections to the motherboard (Power SW, Reset SW).
• La iluminación D-RGB no funciona:
  • Confirm D-RGB cables are correctly connected to the motherboard's D-RGB header or a dedicated controller.
  • Ensure D-RGB software (if applicable) is installed and configured correctly.
• Flujo de aire deficiente/temperaturas altas:
  • Check fan orientation; intake fans should draw air in, exhaust fans should push air out.
  • Limpie los filtros de polvo y los componentes internos.
  • Asegúrese de que no haya cables que obstruyan las vías de flujo de aire.

Presupuesto

Información de garantía

For detailed warranty information regarding your Phanteks Evolv X2 chassis, please refer to the official Phanteks webSitio web o la tarjeta de garantía incluida con el producto. Los términos y condiciones de la garantía pueden variar según la región.

Apoyo

If you require further assistance or have questions not covered in this manual, please visit the official Phanteks support webSitio para preguntas frecuentes, controladores e información de contacto.

Visit Phanteks Support