EGLO G80 E26 LED Filament Bulb, 400lm, Warm White, Clear, Model 204663J Instruction Manual

Introducción

This manual provides essential information for the safe and efficient use of your EGLO G80 E26 LED Filament Bulb, Model 204663J. Please read these instructions carefully before installation and retain them for future reference.

Figure 1: EGLO G80 E26 LED Filament Bulb, front view.

Configuración e instalación

Follow these steps to install your LED filament bulb:

1. Seguridad ante todo: Before attempting any installation, ensure the power supply to the light fixture is turned OFF at the circuit breaker or wall switch.
2. Permitir enfriamiento: If replacing an existing bulb, allow the old bulb to cool completely before removal to prevent burns.
3. Quitar la bombilla vieja: Carefully unscrew the old bulb from the E26 socket by turning it counter-clockwise.
4. Instalar bombilla nueva: Gently screw the EGLO G80 LED Filament Bulb into the E26 socket by turning it clockwise until it is snug. Do not overtighten.
5. Restaurar energía: Una vez que la bombilla esté instalada de forma segura, restablezca la energía a la luminaria.

Importante: This bulb is designed for E26 base sockets only. Ensure your fixture is compatible before installation.

Figure 2: EGLO G80 E26 LED Filament Bulb with dimensions (Diameter 80mm x Height 120mm).

Instrucciones de funcionamiento

The EGLO G80 LED Filament Bulb operates like a standard light bulb. Once installed in a compatible fixture with power restored, simply use the fixture's switch to turn the light ON or OFF.

• Encendido/apagado: Use the wall switch or fixture switch to control the bulb's illumination.
• No regulable: This bulb is not designed for use with dimmer switches. Using it with a dimmer may cause damage to the bulb or fixture, and will void the warranty.

Figure 3: EGLO G80 E26 LED Filament Bulb illuminated in a light fixture.

Mantenimiento

The EGLO LED Filament Bulb requires minimal maintenance.

• Limpieza: To clean the bulb, ensure the power is OFF and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Reemplazo: When the bulb reaches the end of its rated life, replace it with a new EGLO G80 E26 LED Filament Bulb or a compatible E26 LED bulb.

Solución de problemas

If your EGLO LED Filament Bulb is not functioning correctly, consider the following:

• La bombilla no se enciende:
  • Check if the power switch for the fixture is ON.
  • Ensure the bulb is screwed in securely into the E26 socket.
  • Verifique que el disyuntor del artefacto no esté disparado.
  • Test the bulb in another working E26 fixture, or test another known working bulb in the original fixture to determine if the issue is with the bulb or the fixture.
• Parpadeo:
  • Ensure the bulb is not used with a dimmer switch, as this bulb is not dimmable.
  • Check for loose connections in the fixture or wall switch.

If problems persist after performing these checks, consult a qualified electrician or contact customer support.

Presupuesto

Información de garantía

This product comes with a warranty of up to 1 year. Please refer to the specific warranty terms and conditions provided at the time of purchase for full details regarding coverage and claims.

Atención al cliente

For further assistance, technical support, or warranty claims, please contact the retailer from whom you purchased the product or refer to the EGLO official websitio para información de contacto.