SMALLRIG Super Clamp and 10-inch Articulating Magic Arm

1. Introducción

El SMALLRIG Super Clamp and 10-inch Articulating Magic Arm (Model 2732B) is a versatile accessory designed for securely mounting various camera equipment such as LCD monitors, LED lights, microphones, and small cameras. Constructed from durable aluminum alloy and stainless steel, this system provides flexible positioning with its 360-degree adjustable articulating arm and a robust super clamp.

This manual provides essential information for the proper setup, operation, and maintenance of your SMALLRIG Magic Arm and Super Clamp.

2. Producto terminadoview

The SMALLRIG 2732B combines a super clamp with an articulating magic arm, offering a comprehensive solution for mounting accessories. The arm features 1/4" screws at both ends for broad compatibility, while the super clamp provides a secure grip on various surfaces.

Características principales:

• Construcción duradera: Made from high-quality aluminum alloy and stainless steel for robustness and longevity.
• Enhanced Rubber Pads: The updated design integrates rubber rings at both ends of the magic arm to prevent detachment and protect mounted equipment from scratches.
• Rotación de 360°: Dual ball head articulating design allows for precise 360-degree angle adjustments.
• Montaje versátil: Equipped with 1/4"-20 screws on the magic arm and 1/4"-20 and 3/8"-16 threaded holes on the super clamp for wide compatibility with monitors, lights, microphones, and cameras.
• Cl anchoamp Apertura: la súper clamp can open from 15mm to 40mm, allowing attachment to various rods, desks, and other surfaces.

3. Instrucciones de configuración

Follow these steps to set up your SMALLRIG Super Clamp and Articulating Magic Arm:

1. Desempaquetar componentes: Carefully remove the magic arm and super clamp from their packaging.
2. Attach Magic Arm to Super Clamp: The magic arm typically connects to the super clamp via a 1/4"-20 screw. Ensure the connection is secure by tightening the knob on the super clamp.
3. Mount Super Clamp: Identify a stable surface (e.g., tripod leg, desk edge, rod) to attach the super clamp. Rotate the T-handle screw on the super clamp para abrir sus fauces. Coloque el clamp around the desired surface and tighten the T-handle until it is firmly secured. The clamp can accommodate surfaces between 15mm and 40mm in thickness or diameter.
4. Adjuntar accesorios: Use the 1/4"-20 screws on either end of the magic arm to attach your monitor, LED light, microphone, or other compatible accessories. Ensure these connections are hand-tightened for stability.

4. Instrucciones de funcionamiento

The SMALLRIG Magic Arm is designed for flexible positioning. Understanding its locking mechanism is key to effective use:

• Single Locking Knob: The entire magic arm is controlled by a single wingnut knob located in the middle. When this knob is loosened, all three ball joints of the arm can move freely, allowing for full articulation.
• Posición de ajuste: To adjust the position of your mounted equipment, loosen the central wingnut knob. Carefully move the arm and attached device to the desired angle and orientation.
• Posición de seguridad: Once the desired position is achieved, tighten the central wingnut knob firmly. This action simultaneously locks all three ball joints, securing the arm and preventing movement.
• súper clamp Ajuste: la súper clamp's T-handle allows for quick attachment and detachment. Ensure it is always tightened securely to prevent accidental drops of your equipment.

Nota importante: Always ensure the central knob is fully tightened before leaving your equipment unattended. Failure to do so may result in equipment damage.

5. Mantenimiento

Para garantizar la longevidad y el rendimiento óptimo de su SMALLRIG Super Clamp and Articulating Magic Arm, follow these maintenance guidelines:

• Limpieza: Wipe the metal surfaces with a soft, dry cloth to remove dust and debris. For stubborn dirt, use a slightly damp cloth and dry thoroughly immediately. Avoid abrasive cleaners or solvents.
• Lubricación: The articulating joints are designed for smooth operation and generally do not require lubrication. If movement becomes stiff, contact customer support for advice.
• Inspect Rubber Pads: Periodically check the rubber pads on the ball heads and inside the super clamp for wear or damage. These pads are crucial for protecting your equipment and ensuring a secure grip.
• Almacenamiento: Store the product in a clean, dry environment away from extreme temperatures and humidity when not in use.

6. Solución de problemas

Si tiene algún problema con su SMALLRIG Super Clamp and Articulating Magic Arm, refer to the following common problems and solutions:

If you experience issues not listed here, please contact SMALLRIG customer support for further assistance.

7. Especificaciones

• Número de modelo: 2732B (also referred to as 2732-CF)
• Material: Aleación de aluminio, acero inoxidable
• Color: Negro
• Dimensiones del producto (L x An x Al): Approximately 0.4P x 17l x 12.5H centimeters (folded/compacted)
• Peso del artículo: 333 gramos
• Carga máxima recomendada: 1.5 kilogramos
• súper clamp Rango de apertura: De 15 mm a 40 mm
• Hilos de montaje: 1/4"-20 (on arm and clamp), 3/8"-16 (on clamp)
• Dispositivos compatibles: Camera, Monitor, LED Lights, Microphones, GoPro HERO10 Black, etc.

8. ¿Qué hay en la caja?

The package for the SMALLRIG Super Clamp and 10-inch Articulating Magic Arm (Model 2732B) includes:

• 1 x Articulating Magic Arm
• 1 x Super Clamp

9. Garantía y soporte

SMALLRIG products are manufactured to high-quality standards. For warranty information, technical support, or any inquiries regarding your product, please visit the official SMALLRIG websitio o contacte directamente con su servicio de atención al cliente. También puede visitar el SMALLRIG Brand Store on Amazon Para más información.