KING K901-B Hoot WiFi Línea VoltagManual del usuario del termostato programable inteligente

Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your KING K901-B Hoot WiFi Line Voltage Smart Programmable Thermostat. This device is designed to provide precise temperature control for electric heating systems, including baseboard, fan-forced, and radiant electric heaters, with the added convenience of WiFi connectivity for remote management.

Lea este manual detenidamente antes de la instalación y el uso para garantizar el correcto funcionamiento y la seguridad.

Información de seguridad

• La instalación debe ser realizada por un electricista calificado de acuerdo con los códigos eléctricos locales y nacionales.
• Siempre apague el interruptor de energía antes de instalar o realizar mantenimiento al termostato.
• Este termostato está diseñado para volumen de líneatage electric heating systems (120V/208V/240V, Single Pole, 3-Wire). Do not use with low voltage systems (e.g., furnaces, central air conditioners).
• Asegúrese de que todas las conexiones del cableado sean seguras para evitar riesgos eléctricos.
• No exponga el termostato al agua ni a la humedad excesiva.

Contenido del paquete

• KING K901-B Hoot WiFi Thermostat
• Tornillos de montaje
• Tuercas de alambre
• Manual de usuario (este documento)

Instalación

Herramientas necesarias:

• Destornillador (Phillips y de punta plana)
• Pelacables
• Volumentage Probador

Wiring Instructions (Single Pole, 3-Wire):

1. Apague la energía: Locate the circuit breaker controlling your heating system and turn it OFF. Verify power is off using a voltage probador.
2. Retire el termostato viejo: Carefully remove your existing thermostat from the wall. Disconnect the wires, noting their connections.
3. Identificar cables: For a single pole, 3-wire installation, you will typically have two line wires (L1, L2 from the power source) and one load wire (to the heater). Consult your existing thermostat's wiring or a qualified electrician if unsure.
4. Connect New Thermostat:
   • Connect the two line wires (L1, L2) from the power source to the thermostat's designated line terminals.
   • Connect the load wire to the thermostat's designated load terminal.
   • Asegúrese de que todas las conexiones estén seguras utilizando tuercas para cables.
5. Montaje del termostato: Fije el termostato a la pared utilizando los tornillos de montaje proporcionados.
6. Restaurar energía: Vuelva a encender la energía en el disyuntor.

Nota: Incorrect wiring can damage the thermostat or heating system and pose a fire hazard. If you are not comfortable with electrical wiring, please consult a licensed electrician.

Image: The KING K901-B Hoot WiFi Thermostat display, showing the current temperature and set point, alongside the Hoot logo and icons for downloading the app from the App Store and Google Play.

Setup: Hoot Smart Phone App & WiFi Connection

The Hoot thermostat connects to your home WiFi network (2.4GHz only) to enable remote control and programming via the Hoot smartphone app.

1. Descargar la aplicación: Buscar "Hoot Smart Comfort Control" in the Apple App Store or Google Play Store and install it on your smartphone.
2. Crear una cuenta: Open the Hoot app and follow the on-screen instructions to create a new user account or log in if you already have one.
3. Agregar dispositivo: En la aplicación, seleccione la opción para agregar un nuevo dispositivo.
4. Modo de emparejamiento del termostato: On the thermostat, follow the instructions to put it into WiFi pairing mode. This usually involves holding a specific button or navigating through a menu. The thermostat display will indicate when it's ready to connect.
5. Conéctese a Wi-Fi: In the Hoot app, select your 2.4GHz home WiFi network and enter the password. The app will guide you through the connection process.
6. Confirmación: Once connected, the thermostat display will show a WiFi icon, and the app will confirm successful pairing.

Importante: The Hoot thermostat only supports 2.4GHz WiFi networks. If you have a dual-band router, ensure your phone is connected to the 2.4GHz band during the setup process.

Instrucciones de funcionamiento

Manual Operation (Touchscreen):

• Temperatura de ajuste: Utilice el Up (^) y abajo (v) arrows on the touchscreen to increase or decrease the set temperature.
• Encendido/apagado: Presiona el boton de poder (⏻) para encender o apagar el sistema de calefacción.
• Selección de modo: The thermostat may offer different modes (e.g., Heat, Off). Refer to the on-screen icons for selection.
• Anulación de horario: Manually adjusting the temperature will temporarily override any active schedule. The override duration can often be set or will revert at the next scheduled event.

App Operation (Hoot Smart Comfort Control):

• Control remoto de temperatura: Adjust the temperature from anywhere using the Hoot app on your smartphone.
• Horarios de programación:
  • Create custom heating schedules with up to 4 or 6 time periods per day for maximum flexibility.
  • Set different schedules for weekdays and weekends, or customize each day individually.
• Función de retención: Use the "Hold" feature to maintain a specific temperature indefinitely, overriding the schedule until manually released.
• Modo vacaciones: Set a specific temperature for an extended period when you are away, saving energy.
• User Defined Max Temperature Lock: Set a maximum temperature limit to prevent overheating or unauthorized adjustments.

Mantenimiento

• Limpieza: Limpie suavemente la pantalla y el cuerpo del termostato con un paño suave.amp Paño. No utilice limpiadores abrasivos ni disolventes.
• Actualizaciones de firmware: The thermostat supports Over-The-Air (OTA) firmware upgrades. The Hoot app will notify you if an update is available. Follow the app's instructions to ensure your thermostat has the latest features and improvements.
• Batería (si corresponde): Esta linea vol.tage thermostat does not typically require batteries for operation, as it draws power directly from the heating circuit.

Solución de problemas

• El termostato no se enciende:
  • Verifique el disyuntor y asegúrese de que esté encendido.
  • Verifique que todas las conexiones del cableado sean seguras y correctas.
• Sin salida de calor:
  • Asegúrese de que el termostato esté configurado a una temperatura superior a la temperatura ambiente actual.
  • Check if the thermostat is in "Off" mode or "Vacation" mode.
  • Verify the heating system itself is functioning correctly.
• Problemas de conexión WiFi:
  • Confirme que su enrutador esté transmitiendo una red de 2.4 GHz.
  • Ensure your smartphone is connected to the 2.4GHz network during setup.
  • Move the thermostat closer to the WiFi router if possible, or consider a WiFi extender.
  • Restart your router and the thermostat (by cycling power at the breaker).
  • Re-attempt the WiFi pairing process through the Hoot app.
• Lecturas de temperatura inexactas:
  • Asegúrese de que el termostato no esté expuesto a la luz solar directa, corrientes de aire o fuentes de calor (por ejemplo, lamps, electrodomésticos) que pudieran afectar a su sensor.
  • The thermostat uses an electronic thermistor for accurate control (±1°F).
• La pantalla táctil no responde:
  • Try cycling power to the thermostat at the circuit breaker to reset it.

Presupuesto

Garantía y soporte

For warranty information and technical support, please refer to the official KING website or contact KING customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Fabricante: Rey Eléctrico

Websitio: www.king-electric.com (Examp(el enlace real puede variar)