Manual de usuario de los auriculares Bluetooth AIKELA

Introducción

Thank you for choosing the AIKELA Bluetooth Headset. This manual provides detailed instructions on how to set up, operate, and maintain your headset to ensure optimal performance and longevity. Designed for clear communication and comfort, this headset is ideal for various applications including business calls, online meetings, and general multimedia use.

Producto terminadoview

The AIKELA Bluetooth Headset features a comfortable over-ear design with an adjustable headband and a 280° rotatable microphone. It is equipped with soft memory foam ear cushions for extended wear. The headset integrates Bluetooth 5.0 technology for stable connections and a noise-canceling microphone for clear audio transmission.

Key comfort features include an adjustable headband to fit various head sizes, a microphone that can rotate 280 degrees for left or right ear use, and soft memory foam ear cushions designed for breathability and comfort during long periods of use.

The headset features easily accessible controls including volume up (+), volume down (-), a multi-functional button for power and call management, a Type-C charging port, and a dedicated mute button with an LED indicator for the microphone.

Configuración

1. Cargar los auriculares

Before first use, fully charge the headset. Connect the provided Type-C charging cable to the headset's charging port and the other end to a USB power source. A full charge takes approximately 1.5 hours. The headset provides up to 30 hours of talk/music time on a single charge and has a standby time of 400 hours.

2. Emparejamiento Bluetooth

1. Asegúrese de que los auriculares estén completamente cargados.
2. Power on the headset by pressing and holding the Multi-Functional Button until the LED indicator flashes blue and red, indicating pairing mode.
3. On your device (smartphone, PC, tablet), enable Bluetooth and search for available devices.
4. Select "AIKELA M100C" from the list of devices.
5. Una vez conectado, el indicador LED mostrará una luz azul fija.

3. Conexión de dos dispositivos

The AIKELA headset supports simultaneous connection to two Bluetooth devices. After connecting to the first device, disable Bluetooth on the first device. Then, pair the headset with the second device following the Bluetooth Pairing steps. Once the second device is connected, re-enable Bluetooth on the first device. The headset should automatically connect to both devices, allowing you to seamlessly switch between calls from your work phone and personal phone, or other devices.

Instrucciones de funcionamiento

Controles básicos

The dedicated mute button allows for quick microphone muting during calls, providing privacy when needed. The LED indicator on the mute button will change to confirm the mute status.

Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar los auriculares. No utilice limpiadores abrasivos ni disolventes. Para las almohadillas, límpielas suavemente con agua.amp paño y dejar secar al aire completamente antes de usar.
• Almacenamiento: Guarde los auriculares en un lugar fresco y seco, alejados de la luz solar directa y de temperaturas extremas. Evite colocar objetos pesados ​​sobre ellos.
• Cuidado de la batería: Para prolongar la vida útil de la batería, evite descargar completamente los auriculares con frecuencia. Cárguelos regularmente, incluso si no los usa durante períodos prolongados.

Solución de problemas

Presupuesto

Garantía y soporte

AIKELA products are designed and manufactured to the highest quality standards. For information regarding warranty coverage and customer support, please refer to the warranty card included with your product or visit the official AIKELA website. If you encounter any issues not covered in this manual, please contact AIKELA customer service for assistance.

For further assistance, you may visit the AIKELA Store on Amazon: AIKELA Store