FUERS G34 4G GSM/WiFi Home Alarm System User Manual

1. Producto terminadoview

The FUERS G34 is an advanced 4G GSM/WiFi home alarm system designed to provide comprehensive security for your property. It features a 2.4-inch TFT color screen, touch keypad, and supports various wireless and wired sensors. The system can be controlled via call, SMS, or the Tuya Smart App, and is compatible with Alexa and Google Home for voice control.

1.1 Componentes del panel principal

Imagen 1.1: Delantera y trasera view of the FUERS G34 alarm panel, highlighting key components and dimensions.

• Panel frontal:
  • Pantalla TFT de 2.4 pulgadas: Displays system status, time, and settings.
  • Vocero: Para alertas de audio y mensajes de voz.
  • Botón de emergencia SOS: Activa una alarma inmediata y envía notificaciones.
  • RFID Card Reading Area: For quick arming/disarming with RFID tags.
  • Teclado táctil: For entering codes and navigating menus.
• Panel trasero:
  • Anti-sabotage Interruptor: Detects unauthorized removal of the panel.
  • Agujero de sirena: Output for external wired siren.
  • Interruptor encendido / apagado: Main power switch for the panel.
  • SIM Card Slot (2G/3G/4G Support): For GSM/4G communication.
  • Terminales de zona cableada: Para conectar sensores cableados.
  • Puerto de alimentación CC de 5 V: Para conectar el adaptador de corriente.
  • Micrófono: For two-way audio communication (if supported by specific models/firmware).

1.2 Componentes del sistema

Imagen 1.2: The FUERS G34 system supports a variety of wireless and wired sensors, including PIR motion detectors, door/window sensors, smart plugs, IP cameras, and water detectors.

The FUERS G34 system supports up to 100 wireless zones and 3 wired zones, allowing for extensive coverage and customization with various sensors and accessories. These include:

• Detectores de movimiento PIR
• Sensores de puerta/ventana
• Enchufes inteligentes
• Cámaras IP
• Water Detectors
• Smoke Detectors (not explicitly shown but common)
• Controles remotos
• RFID Tags

2. Instrucciones de configuración

2.1 Encendido del panel principal

1. Connect the provided DC 5V power adapter to the power port on the rear of the main panel.
2. Enchufe el adaptador en un tomacorriente de pared estándar.
3. Flip the ON/OFF switch on the rear of the panel to the "ON" position. The panel will power on and display the boot screen.

2.2 Instalación de la tarjeta SIM

Imagen 2.1: The FUERS G34 system supports a standard SIM card for 2G/3G/4G GSM communication. Ensure the SIM card is correctly inserted.

1. Ensure the main panel is powered off before inserting the SIM card.
2. Locate the SIM card slot on the rear of the panel.
3. Insert a standard 2G/3G/4G SIM card into the slot, ensuring the correct orientation. The system primarily uses 2G GSM for alarm calls/SMS, but 4G SIMs are compatible.
4. Encienda el panel. El sistema intentará conectarse a la red celular.

2.3 Conexión Wi-Fi

The FUERS G34 supports 2.4GHz Wi-Fi networks for app control and notifications.

1. On the main panel, navigate to the "Settings" menu.
2. Seleccione “Configuración de Wi-Fi” o “Configuración de red”.
3. Enable Wi-Fi and select your 2.4GHz Wi-Fi network from the list.
4. Enter your Wi-Fi password using the touch keypad.
5. Confirm the connection. The panel should display a Wi-Fi connected icon.

2.4 Emparejamiento de sensores y accesorios inalámbricos

The system supports up to 100 wireless sensors and 10 RFID tags.

1. On the main panel, navigate to the "Parts" or "Accessories" menu.
2. Select "Add Sensor" or "Add Remote/RFID".
3. Follow the on-screen prompts to put the panel into learning mode.
4. Activate the sensor (e.g., open a door/window for a door sensor, press the button on a remote, or swipe an RFID tag).
5. The panel will confirm successful pairing. Assign the sensor to a specific zone and name it for easy identification.

3. Instrucciones de funcionamiento

3.1 Armado y desarmado del sistema

Imagen 3.1: The alarm panel showing arm and disarm functions, along with other key features like TFT screen, SOS button, RFID support, and voice prompt.

• Arm (Full Arm): Press the "Arm" button on the panel, remote control, or use the mobile app/RFID tag. All configured sensors will be active.
• Desarmar: Enter your password on the keypad, press the "Disarm" button on the remote control, or use the mobile app/RFID tag. The system will deactivate all sensors.
• Armado en casa (armado en reposo): Activates perimeter sensors (e.g., door/window sensors) while allowing movement within the property. This is typically activated via the app or a specific button on the remote.

3.2 Función de emergencia SOS

The SOS button is for immediate emergency situations.

• Press the large "SOS" button on the front of the main panel.
• The system will immediately trigger an alarm, sound the siren, and send emergency calls/SMS to pre-programmed numbers.
• This function operates regardless of the system's arming status.

3.3 RFID Card Usage

RFID cards provide a quick and convenient way to arm or disarm the system.

• To arm or disarm, simply swipe a pre-registered RFID card over the RFID card reading area on the front panel.
• The system will provide an audible confirmation of the action.

3.4 Control de aplicaciones móviles (Tuya Smart)

Imagen 3.2: The Tuya Smart App interface for remote control and integration with Amazon Alexa and Google Assistant for voice commands.

1. Descarga la aplicación "Tuya Smart" desde la tienda de aplicaciones de tu teléfono inteligente (iOS o Android).
2. Registre una cuenta e inicie sesión.
3. Add the FUERS G34 alarm system as a new device within the app, following the on-screen instructions. Ensure your phone and the alarm panel are connected to the same 2.4GHz Wi-Fi network during initial pairing.
4. Once connected, you can remotely arm/disarm the system, check status, receive notifications, and manage sensors from anywhere with an internet connection.

3.5 Control por voz (Alexa/Google Home)

The FUERS G34 system integrates with Amazon Alexa and Google Home for convenient voice control.

1. Ensure your FUERS G34 system is successfully connected to the Tuya Smart app.
2. Abra la aplicación Amazon Alexa o la aplicación Google Home en su teléfono inteligente.
3. Enable the "Tuya Smart" skill/service within the respective app.
4. Vincula tu cuenta Tuya Smart.
5. Discover devices. Your FUERS G34 alarm system should appear.
6. Ahora puedes usar comandos de voz como:
   • "Alexa, arm the alarm system."
   • "Ok Google, desactiva la alarma". (Puede requerir un PIN para desactivarla)

4. Características principales

4.1 Dual Network Connectivity (4G GSM & Wi-Fi)

The system utilizes both 4G GSM and Wi-Fi networks for reliable communication. In case one network fails, the other acts as a backup, ensuring continuous monitoring and notification delivery.

4.2 Door/Window Unclosed Reminder

Imagen 4.1: The alarm panel displaying a reminder if a door or window is left open, preventing arming until secured.

Before arming the system, the panel will check the status of all configured door/window sensors. If any are detected as open, the system will issue a reminder on the LCD screen and an audible prompt, preventing arming until all entry points are secured.

4.3 Multi-Zone Support

The system supports up to 100 wireless defense zones and 3 wired defense zones, allowing for flexible configuration and monitoring of different areas of your home.

4.4 Pet-Immune Detector Compatibility

Compatible with pet-immune PIR motion detectors, which are designed to ignore pets up to a certain weight, reducing false alarms while maintaining security.

4.5 Voice Prompt Function

The system provides clear voice prompts for various operations and status changes, making it user-friendly for all ages.

4.6 Armado/desarmado programado

Allows users to set specific times for the system to automatically arm or disarm, enhancing convenience and security routines.

5. Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar el panel principal y los sensores. Evite el uso de limpiadores abrasivos o disolventes.
• Comprobación de la batería: Periodically check the battery status of wireless sensors and replace batteries as needed. The main panel has a built-in backup battery; ensure it is charged.
• Prueba del sistema: Regularly test the alarm system by triggering a sensor (e.g., opening a door) to ensure it functions correctly and sends notifications.
• Actualizaciones de firmware: Check the Tuya Smart app or manufacturer's website for any available firmware updates for the main panel to ensure optimal performance and security.

6. Solución de problemas

• El sistema no se arma:
  • Check if any door/window sensors are open. Close all entry points.
  • Ensure all sensors are properly paired and functioning.
• No Notifications via App/SMS:
  • Verify Wi-Fi connection on the main panel.
  • Check SIM card status and ensure it has an active plan with sufficient credit for calls/SMS.
  • Confirm notification settings in the Tuya Smart app.
• Alarmas falsas:
  • Ensure PIR motion detectors are installed in areas free from drafts, direct sunlight, or moving objects (curtains, pets).
  • Verifique los niveles de batería del sensor.
  • Verify sensor placement and sensitivity settings.
• El control de voz no funciona:
  • Ensure the Tuya Smart skill/service is enabled and linked in your Alexa/Google Home app.
  • Verify the alarm system is online and connected to the Tuya Smart app.
  • Use the exact voice commands as specified by Alexa/Google Home for Tuya devices.

7. Especificaciones