Introducción
The JBL GO 3 is an ultra-portable and lightweight Bluetooth speaker designed for on-the-go use. It features JBL Pro Sound, a modern design, and is available in various colors. This speaker allows you to stream music wirelessly from your mobile phone or smartphone, offering up to 5 hours of playtime on a single charge. The GO 3 is built to withstand outdoor adventures, being IP67 rated for water and dust resistance.
Image: The JBL GO 3 speaker, demonstrating its ultra-portable design, shown on a sandy beach next to individuals.
¿Qué hay en la caja?
Upon unboxing your JBL GO 3, you should find the following items:
- 1x JBL GO 3 Portable Bluetooth Speaker
- 1x cable USB tipo C
- 1x Guía de inicio rápido
- 1x hoja de seguridad
Producto terminadoview
Componentes del altavoz
Imagen: Frente view of the JBL GO 3 speaker, showcasing su diseño compacto y el logotipo de JBL.
Image: Top panel of the JBL GO 3, displaying the volume up (+), play/pause (triangle), and volume down (-) buttons.
Imagen: Lateral view of the JBL GO 3, featuring the integrated fabric loop for portability.
Imagen: Abajo view of the JBL GO 3, showing the anti-slip rubberized feet and regulatory markings.
Configuración
1. Carga de la batería
Before first use, fully charge the JBL GO 3. Connect the supplied USB Type-C cable to the charging port on the speaker and to a USB power adapter (not included). The charging indicator light will show the charging status.
- Tiempo de carga: Approximately 2.5 hours (with 5V/1A adapter).
- Tipo de batería: Lithium-ion polymer (22.2 Wh).
Image: The JBL GO 3 speaker shown during a picnic, illustrating its battery life of up to 5 hours.
2. Encendido y apagado
To power on the speaker, press the power button located on the side. Press and hold the power button again to turn it off.
3. Emparejamiento Bluetooth
- Turn on the JBL GO 3. The Bluetooth indicator light will flash, indicating it is in pairing mode.
- On your mobile device, go to Bluetooth settings and select "JBL GO 3" from the list of available devices.
- Una vez conectado, la luz indicadora de Bluetooth permanecerá fija.
Image: Icon representing Bluetooth connectivity.
Instrucciones de funcionamiento
Tocando música
- Reproducir/Pausa: Press the play/pause button (triangle icon) once to play or pause music.
- Pista siguiente: Double-press the play/pause button to skip to the next track.
- Control de volumen: Use the volume up (+) and volume down (-) buttons on the speaker to adjust the audio level.
Image: Icon representing JBL Pro Sound quality.
Mantenimiento
Limpieza
Limpie el altavoz con un paño suave, damp cloth. Do not use harsh chemicals or abrasive materials. Ensure the charging port cover is securely closed before cleaning with water.
Resistencia al agua y al polvo (IP67)
The JBL GO 3 is IP67 rated, meaning it is protected against dust ingress and can withstand immersion in water up to 1 meter for up to 30 minutes. For optimal performance and longevity, ensure the charging port cover is fully sealed before exposing the speaker to water or dust. After exposure to water, allow the speaker to dry completely before charging.
Image: The JBL GO 3 speaker shown partially submerged in shallow water on a sandy beach, illustrating its IP67 waterproof capability.
Image: Icon indicating IP67 water and dust resistance.
Almacenamiento
Guarde el altavoz en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas cuando no lo utilice durante períodos prolongados.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El altavoz no se enciende. | La batería está agotada. | Cargue el altavoz utilizando el cable USB-C suministrado. |
| No se puede emparejar a través de Bluetooth. | El altavoz no está en modo de emparejamiento o está demasiado lejos del dispositivo. | Ensure speaker is on and Bluetooth indicator is flashing. Move device closer. Try re-pairing. |
| No hay sonido o volumen bajo. | El volumen es demasiado bajo en el altavoz o en el dispositivo conectado. | Aumente el volumen tanto del altavoz como del dispositivo conectado. |
| Mala calidad de sonido. | Interference or device too far. | Move speaker closer to the connected device. Avoid obstacles between devices. |
| El orador no responde. | Fallo temporal del software. | To reset the product, turn on the speaker and simultaneously press the volume + button and the Bluetooth button for 3 to 5 seconds until the speaker turns off. |
Presupuesto
Image: Diagram showing the dimensions of the JBL GO 3 speaker.
- Nombre del modelo: JBLGO3BLU
- Marca: JBL
- Potencia de salida: 4.2 vatios RMS
- Respuesta de frecuencia: De 110 Hz a 20 kHz
- Relación señal / ruido: > 85 dB
- Tecnología de conectividad: Bluetooth, USB
- Versión de Bluetooth: 5.1
- bluetooth profesionalfiles: A2DP 1.3, AVRCP 1.6
- Potencia del transmisor Bluetooth: ≤ 8 dBm (PIRE)
- Alcance de Bluetooth: 10 metros
- Duración de la batería: Up to 5 hours (varies with volume level and audio content)
- Tiempo de carga de la batería: 2.5 horas (5V / 1A)
- Tipo de batería: Lithium-ion polymer (22.2 Wh)
- Resistencia al agua: IP67 (resistente al agua y al polvo)
- Material: Plástico
- Dimensions (P x L x H): 7.5 x 8.7 x 4.1 cm (Profundidad x Ancho x Alto)
- Peso del artículo: 209 gramos
- Dispositivos compatibles: Ordenador portátil, tableta, teléfono inteligente
- Método de control: Botones
- Código postal: 050036374378, 194644118723
Garantía y soporte
The JBL GO 3 comes with a limited warranty. Please refer to the safety sheet included in the box for detailed warranty information.
- Descripción de la garantía: 12 meses
- Disponibilidad de repuestos: 2 años
For further assistance, please visit the official JBL support websitio o póngase en contacto con su servicio de atención al cliente.
You can visit the JBL brand store for more products and information: Tienda de la marca JBL