1. Introducción
Thank you for choosing the LEPOTEC 30-LED Motion Sensor Cabinet Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new lighting product. Please read this manual thoroughly before use and retain it for future reference.
Contenido del paquete:
- LEPOTEC 30-LED Motion Sensor Cabinet Light (2 units)
- Cable de carga USB
- Adhesive Magnetic Strips
- Manual de usuario
2. Características del producto
- Tecnología LED avanzada: Features 30 side-emitting LED lamp beads for bright (up to 200 lumens) yet soft, non-glare illumination. Constructed from durable aluminum alloy.
- Fácil instalación: Built-in magnet allows direct attachment to iron surfaces. For non-iron surfaces, use the included adhesive tape and metal sheet for secure mounting. Lights can be easily removed for charging or relocation.
- Tres modos de trabajo: Equipped with a 3-mode switch (ON-OFF-G) for continuous illumination, off, or motion sensor mode.
- Recargable por USB: Integrated 1000mAh high-capacity rechargeable battery, easily charged via the included USB cable. Offers approximately 3 hours of continuous light or 2-4 weeks in motion sensor mode (based on 10 activations per day) on a full charge.
- Amplia aplicación: Suitable for various indoor locations such as closets, cabinets, corridors, workshops, basements, garages, and stairwells.
Image: Two LEPOTEC 30-LED Motion Sensor Cabinet Lights, illustrating the product design.
3. Configuración e instalación
The LEPOTEC cabinet light offers flexible installation options due to its magnetic design.
Pasos de instalación:
- Fijación magnética directa: If installing on an iron surface (e.g., refrigerator, metal cabinet), simply place the light directly onto the surface. The built-in magnet will secure it.
- Adhesive Magnetic Strip Installation (for non-iron surfaces):
- Clean the desired installation surface to ensure it is dry and free of dust or grease.
- Peel off the protective film from one side of the adhesive tape and attach it to the metal plate.
- Peel off the protective film from the other side of the adhesive tape and firmly press the metal plate onto the cleaned surface.
- Attach the LEPOTEC cabinet light to the metal plate. The light will magnetically adhere to the plate.
Image: Illustration of the built-in magnet for direct attachment and the adhesive magnetic strip method for non-metal surfaces.
4. Instrucciones de funcionamiento
The LEPOTEC cabinet light features a versatile 3-mode switch and motion sensing capabilities.
Selección de modo:
Locate the switch on the side of the light bar. Slide the switch to select one of the following modes:
- EN: La luz permanecerá encendida continuamente.
- OFF: La luz se apagará.
- G (Motion Sensor Mode): In a dark environment, the light will automatically detect human motion within a 10ft/120° range. It will turn on when motion is detected and automatically turn off after 20 seconds of no movement. The motion sensor is designed to activate only in low-light conditions to conserve battery life.
Imagen: Detallada view of the 3-mode switch (G, OFF, ON) and the Type-C charging port.
Image: Explanation of the auto-induction condition, showing the motion sensor activates only in low light (night) and not in bright light (daytime).
5. Mantenimiento
Carga de la batería:
The light is equipped with a built-in rechargeable battery. When the battery is low, the light output may diminish. To charge:
- Connect the included USB charging cable to the Type-C charging port on the light bar.
- Conecte el otro extremo del cable USB a un adaptador de corriente USB estándar (no incluido) o a un puerto USB de una computadora.
- La luz indicadora de carga se iluminará en rojo durante la carga.
- Una vez completamente cargada (aproximadamente 3 horas), la luz indicadora se volverá verde.
- Desconecte el cable de carga.
Image: Visual representation of the 1000mAh battery, quick charge capability, and charging status indicators (red for charging, green for fully charged).
Limpieza:
To clean the light, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
6. Solución de problemas
If you encounter issues with your LEPOTEC cabinet light, please refer to the following common problems and solutions:
| Problema | Posible causa | Solución |
|---|---|---|
| Light does not turn on in 'G' (Motion Sensor) mode. | Insufficient darkness; battery low; sensor obstructed. | Ensure the environment is dark enough for the sensor to activate. Charge the battery. Check if the sensor is clean and unobstructed. |
| Light stays on continuously in 'G' mode or flickers. | Constant motion detected; sensor malfunction; switch issue. | Ensure no continuous motion is within the sensor's range. Try switching to 'OFF' and then back to 'G' mode. If the issue persists, contact customer support. |
| La luz no se carga. | Faulty cable; power source issue; charging port damage. | Prueba con otro cable USB y adaptador de corriente. Asegúrate de que el puerto de carga esté limpio y sin daños. |
| La duración de la batería es más corta de lo esperado. | Frequent activation; continuous 'ON' mode usage. | Battery life varies with usage frequency. Reduce activations in 'G' mode or use 'OFF' mode when not needed. Ensure the light is fully charged. |
7. Especificaciones
| Característica | Detalle |
|---|---|
| Marca | LEPOTEC |
| Número de modelo | TL030-2 |
| Fuente de luz | 30 cuentas LED |
| Color claro | Luz blanca |
| Brillo | 200 lúmenes |
| Quétage | 2 vatios |
| Volumentage | 3.7 voltios |
| Capacidad de la batería | Polímero de litio de 1000 mAh |
| Tiempo de carga | Aproximadamente 3 horas |
| Rango del sensor de movimiento | 10 pies / 120° |
| Hora de apagado automático | 20 seconds (after no motion in 'G' mode) |
| Material | Aluminio, Hierro |
| Dimensiones del producto | 8.2"L x 3.5"W x 0.6"H (7.8 inch length for the light bar itself) |
| Peso del artículo | 9.12 onzas |
| Tipo de instalación | Magnetic, Adhesive Mount |
| Uso en interiores y exteriores | Interior |
8. Garantía y soporte
LEPOTEC is committed to providing high-quality products. For any questions, concerns, or technical support regarding your LEPOTEC 30-LED Motion Sensor Cabinet Light, please contact our customer service team.
Consulte la documentación de compra o la del minorista. webSitio para obtener detalles específicos de la garantía e información de contacto.