1. Introducción
The Fender Acoustic Junior GO amplifier is designed to provide full, natural sound for acoustic-electric guitars and vocals. This portable system features two independent channels, each equipped with studio-quality effects. Key functionalities include Bluetooth wireless audio streaming and an integrated 90-second looper, making it suitable for various performance settings. Its rechargeable battery allows for extended use without a power outlet.
2. Configuración
2.1. Desembalaje
Retire con cuidado el ampRetire el dispositivo de su embalaje. Conserve todos los materiales de embalaje para su posterior transporte o almacenamiento. Inspeccione el amplifier for any signs of damage. If damage is present, contact your retailer immediately.
2.2. Encendido y carga
The Acoustic Junior GO amplifier is equipped with a rechargeable lithium-ion battery. For initial use, it is recommended to fully charge the battery. Connect the provided power adapter to the amplifier's power input and then to a suitable electrical outlet. The charging indicator will illuminate. A full charge provides approximately 5 hours of playing time at full volume or 12 hours at moderate volume. The amplifier can also be operated while connected to AC power.
2.3. Conexión de instrumentos y micrófonos
El amplifier features two independent channels:
- Canal 1: Designed for acoustic-electric guitars. Connect your instrument using a standard 1/4-inch instrument cable.
- Canal 2: Designed for microphones. Connect your microphone using an XLR cable. This channel also supports 1/4-inch instrument inputs.
Asegúrese de que todas las conexiones estén seguras antes de encender el ampmás duradero.
3. Instrucciones de funcionamiento
3.1. Controles de canal
Each channel features independent controls for volume, equalization (bass, middle, treble), and effects. Adjust these controls to achieve your desired sound. Experiment with different settings to find the optimal tone for your instrument or voice.
3.2. Emparejamiento Bluetooth
To stream audio wirelessly from a phone or tablet:
- Activa el Bluetooth en tu dispositivo móvil.
- Press the Bluetooth pairing button on the amplifier. The indicator light will flash.
- Select 'Fender Acoustic Junior GO' from the list of available devices on your mobile device.
- Once paired, the indicator light will remain solid, and you can stream audio through the ampmás duradero.
3.3. Looper Function
The onboard 90-second looper allows for recording and layering audio. The looper controls include:
- Record/Dub: Press once to start recording. Press again to overdub.
- Reproducir/Detener: Press once to play the loop. Press again to stop.
- Deshacer: Reverts the last overdub.
Refer to the detailed looper section in the full manual for advanced techniques.
3.4. Tilt-Back Kickstand
El amplifier features an integral tilt-back kickstand. This allows you to angle the amplifier upwards, directing the sound more effectively towards the performer or audience, especially in smaller venues or when placed on the floor.
4. Mantenimiento
4.1. Limpieza
Para limpiar el ampPara limpiar, utilice un paño suave y seco. Para la suciedad difícil, utilice un paño ligeramente seco.amp cloth may be used, followed by a dry cloth. Avoid using abrasive cleaners, solvents, or waxes, as these can damage the finish and components.
4.2. Almacenamiento
Almacenar el amplifier in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged (around 50%) to prolong its lifespan.
4.3. Cuidado de la batería
To maximize the life of the lithium-ion battery:
- Evite descargar completamente la batería periódicamente.
- No exponga el ampElevador al calor o al frío extremos.
- Si el amplifier will not be used for several months, charge it to approximately 50% every 3-6 months.
5. Solución de problemas
This section addresses common issues you might encounter with your Fender Acoustic Junior GO ampmás duradero.
| Problema | Posible causa | Solución |
|---|---|---|
| No hay salida de sonido | Volume controls are low; cables are not connected properly; instrument/microphone issue; ampEl elevador no está encendido. | Check all volume knobs (master, channel, instrument/mic). Ensure cables are securely connected. Verify instrument/microphone functionality. Confirm ampEl lifier está encendido y cargado. |
| Bluetooth no emparejado | Bluetooth not activated on device; amplifier not in pairing mode; device too far. | Ensure Bluetooth is enabled on your device. Press the amplifier's Bluetooth button to enter pairing mode. Move your device closer to the ampmás duradero. |
| El looper no graba ni reproduce | Incorrect button sequence; looper memory full (unlikely for 90s). | Review the looper operating instructions. Ensure you are pressing the correct buttons for record, dub, play, and stop. |
| Sonido distorsionado | Input signal too high; volume too high; faulty cable. | Reduce the input gain or volume on the instrument/microphone channel. Lower the master volume. Try a different cable. |
6. Especificaciones
| Característica | Detalle |
|---|---|
| Nombre del modelo | Acoustic Junior GO |
| Número de modelo | 2314400000 |
| Marca | Defensa |
| Salida Wattage | 100 vatios |
| Dimensiones del producto | 16 x 20 x 16 pulgadas (alto x ancho x profundidad) |
| Peso del artículo | 20.6 libras |
| Tipo de batería | Ion de litio recargable |
| Duración de la batería | Up to 5 hours (full volume), 12 hours (moderate volume) |
| Conectividad | Bluetooth, 1/4-inch instrument input, XLR microphone input |
| Bucleador | 90-second with Record/Dub, Play/Stop, Undo |
| Volumentage | Vol. Universaltage para uso global |
7. Garantía y soporte
Fender products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical support, please visit the official Fender webSitio web o contacte con el servicio de atención al cliente de Fender. Conserve su comprobante de compra para reclamaciones de garantía.
Soporte en línea: www.fender.com/support