Introducción
This manual provides detailed instructions for the installation, operation, and maintenance of your Sunlite 87732-SU 6 Inch CCT Dimmable LED Recessed Light Fixture. This energy-efficient fixture offers adjustable color temperature and wattage, making it a versatile lighting solution for various applications. Please read these instructions carefully before installation and retain them for future reference.
Información de seguridad
ADVERTENCIA: This product can expose you to chemicals known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, go to http://www.P65Warnings.ca.gov.
- Apague siempre la alimentación en el disyuntor antes de realizar cualquier instalación o mantenimiento.
- Consulte a un electricista calificado si no está seguro acerca del proceso de instalación.
- Asegúrese de que todas las conexiones eléctricas cumplan con los códigos y ordenanzas locales.
- Do not install in areas where the operating temperature exceeds the fixture's rating.
- This fixture is ETL listed for wet locations, making it suitable for damp entornos.
Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar la instalación:
- Sunlite 87732-SU LED Recessed Light Fixture
- Caja de conexiones
- Instrucciones de instalación (este manual)
Configuración e instalación
The Sunlite 87732-SU fixture is designed for easy installation in new construction or retrofit applications. It features spring-loaded clips for a secure fit.
Pre-Installation Steps: Color Temperature and Wattage Selección
Before installing the fixture, select your desired color temperature (CCT) and wattage output using the switches located on the back of the fixture. These settings cannot be changed easily once installed.
- Selección de temperatura de color (CCT): Choose between 3000K (Warm White), 3500K (Neutral White), or 4000K (Cool White) to match your preference or room ambiance.
- Quétage/Lumen Output Selection: Select the desired brightness level:
- 9 Watts for 750 Lumens
- 13 Watts for 1050 Lumens
- 19 Watts for 1500 Lumens
Pasos generales de instalación:
- Apague la energía en el disyuntor principal.
- Cut a hole in the ceiling according to the fixture's dimensions (typically 6 inches for this model). Refer to the dimension image for precise measurements.
- Open the junction box and make the necessary electrical connections (line, neutral, ground) to your building's wiring. This fixture is multi-volt compatible (120-277V).
- Secure the junction box inside the ceiling.
- Connect the fixture to the junction box.
- Push the fixture into the ceiling opening. The spring-loaded clips will hold it in place.
- Restablezca la energía y pruebe el dispositivo.
Instrucciones de funcionamiento
Once installed, the Sunlite 87732-SU LED fixture operates like any standard light fixture. The primary operational feature is its dimmability.
- Funcionalidad regulable: This fixture is dimmable when connected to a compatible 0-10 Volt low voltage dimmer control. Ensure your dimmer is rated for 0-10V operation for optimal performance and a dimming range of 100-10%.
- Índice de reproducción cromática (IRC): With a 90 CRI rating, this fixture provides excellent color accuracy, making colors appear truer and more vivid.
Mantenimiento
The Sunlite 87732-SU LED fixture is designed for minimal maintenance due to its long-life LED technology.
- Limpieza: Para limpiar el dispositivo, asegúrese de que esté apagado. Use un paño suave, seco o ligeramente húmedo.amp Paño. No utilice limpiadores abrasivos ni disolventes.
- Reemplazo de bombilla: The integrated LED chips have a lifespan of up to 50,000 hours, eliminating the need for frequent bulb replacements.
Solución de problemas
Si tiene problemas con su dispositivo, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no enciende | Sin energía, cableado suelto, interruptor defectuoso | Check circuit breaker. Verify all wiring connections. Test the wall switch. |
| La luz parpadea | Incompatible dimmer, loose connection, voltage fluctuaciones | Ensure dimmer is 0-10V compatible. Check wiring. Consult an electrician for voltagproblemas electrónicos. |
| La luz no se atenúa correctamente | Incompatible dimmer, incorrect dimmer wiring | Use a 0-10V low voltage dimmer. Verify dimmer wiring according to its instructions. |
Presupuesto
| Marca | Luz del sol |
| Número de modelo | 87732-SU |
| Código Postal | 653703877327 |
| Color | Acabado blanco |
| Material | Aluminum and Polycarbonate Plastic |
| Usos específicos | Commercial, Residential, Offices, Living Rooms, Bedrooms |
| Fuente de poder | Eléctrico con cable |
| Tipo de fuente de luz | CONDUJO |
| Material de la sombra | Policarbonato |
| Número de fuentes de luz | 1 |
| Volumentage | 120-277 voltios (multivoltio) |
| Quétage | 9W / 13W / 19W (Selectable) |
| Salida de lúmenes | 750lm / 1050lm / 1500lm (Selectable) |
| Temperatura de color | 3000K / 3500K / 4000K (seleccionable) |
| Regulabilidad | 0-10V Low Voltage Dimming (100-10% range) |
| CRI | 90 |
| Esperanza de vida | Hasta 50,000 horas |
| Tipo de accesorio | Montaje empotrado |
| Certificaciones | ETL Listed (Wet Location), Energy Star Certified, IC Rated, Airtight |
| Requiere ensamblaje | No |
| Forma del artículo | Redondo |
Garantía y soporte
Your Sunlite 87732-SU LED Recessed Light Fixture is backed by a Garantía limitada de 3 años from a USA-based company, ensuring quality and reliability.
For technical support, warranty claims, or further assistance, please contact Sunlite customer service. Refer to the product packaging or the official Sunlite webSitio para obtener la información de contacto más actualizada.