Infinity Reference-6001A Mono AmpLifier Manual de usuario

1. Introducción

The Infinity Reference-6001A is a high-performance 600-watt mono subwoofer amplifier designed to enhance your vehicle's audio system. This amplifier delivers robust bass output with minimal strain on your vehicle's electrical system, thanks to its Class D design. It features versatile input options and precise tuning controls to optimize subwoofer performance.

Figura 1: Arriba view of the Infinity Reference-6001A Mono Amplificador, espectáculoasing its compact design and Infinity logo.

2. Características principales

• Diseño compacto: Cuenta con un bajo perfil.file chassis and small footprint for installation in vehicles with limited space.
• Variable Electronic Crossovers and Bass Boost: Allows for precise system tuning and optimized subwoofer performance.
• Balanced Differential Inputs: Engineered to ensure low noise and distortion, even at high output levels, and reduces susceptibility to line-induced engine noise.
• On-board Protection Circuitry: Protege el amplifier from shorts, high-temperature, overvoltage, y subvoltage conditions. An LED indicator signals when these conditions occur.
• RBC Wired Remote: Provides convenient volume adjustment for the subwoofer from the driver's seat.
• Entradas de nivel alto y bajo: Compatible with both aftermarket and factory car stereo systems.

3. Configuración e instalación

Una instalación correcta es crucial para un rendimiento óptimo y la seguridad. Se recomienda que la instalación la realice un profesional cualificado.

3.1 Montaje del Ampmás vivaz

Select a mounting location that is dry, well-ventilated, and secure. The compact size of the Reference-6001A allows for flexible placement in various vehicles. Ensure adequate airflow around the amplificador para evitar el sobrecalentamiento.

3.2 conexiones de cableado

Refer to the diagram below for typical wiring connections. Always disconnect the vehicle's battery before making any power connections.

Figura 2: Posterior view del amplifier showing power, ground, remote, speaker, and RCA input terminals.

• Alimentación (+12V): Connect to the positive terminal of the vehicle's battery using a fuse-protected power cable.
• Tierra (GND): Conéctese a una superficie metálica limpia y sin pintar del chasis del vehículo.
• Remoto (REM): Conéctese a la salida de encendido remoto de su unidad principal.
• Speaker Output (SUB): Connect your subwoofer(s) to these terminals. Ensure correct polarity.
• Entrada (RCA o nivel de altavoz): Use RCA cables for low-level inputs from an aftermarket head unit or speaker-level inputs for factory radios.
• Remote Control (RBC): Connect the wired remote bass knob to the designated port for convenient bass level adjustment.

4. Operar el Ampmás vivaz

Una vez instalado, ajuste el amplifier settings to match your audio system and personal preferences.

4.1 Ajuste de ganancia

Set the gain control to match the output voltagde su unidad principal. Comience con la ganancia al mínimo y auméntela lentamente hasta alcanzar el volumen deseado sin distorsión.

4.2 Filtro de paso bajo (LPF)

The LPF controls the upper frequency limit of the audio signal sent to the subwoofer. Adjust this to blend the subwoofer's output seamlessly with your full-range speakers.

4.3 refuerzo de graves

The variable bass boost allows you to increase the bass output at a specific frequency. Use this sparingly to avoid distortion and potential damage to your subwoofer.

Interruptor trifásico

The phase switch (0°/180°) helps ensure that the subwoofer's output is in phase with the rest of your speakers, providing a more cohesive and impactful bass response.

4.5 RBC Wired Remote

Utilice el control remoto con cable para ajustar cómodamente el nivel de salida del subwoofer desde su posición de conducción.

5. Mantenimiento

The Infinity Reference-6001A amplifier requires minimal maintenance. Keep the unit clean and free from dust and debris. Periodically check all wiring connections to ensure they are secure and free from corrosion. Do not use harsh chemicals or abrasive cleaners.

6. Solución de problemas

Si tiene problemas con su amplifier, consult the following guide before seeking professional service.

6.1 Protection LED Indicator

El amplifier features an LED indicator that illuminates when the on-board protection circuitry is activated due to shorts, high temperature, overvoltage, o subvoltage. If the LED is lit, check the following:

• Cortocircuito: Inspect speaker wiring for any shorts to ground or between positive and negative terminals.
• Calentamiento excesivo: Asegúrese de que amplifier has adequate ventilation. Allow the unit to cool down.
• VolumentagProblemas: Verifique el volumen de la batería del vehículotage is within the operating range (typically 11V-16V).

6.2 Problemas comunes

• Sin energía: Check the main fuse, power cable connection, ground connection, and remote turn-on wire.
• Sin sonido: Verify input signal connections (RCA or speaker level), speaker connections, and amplifier gain settings. Check head unit output.
• Sonido distorsionado: Reduce gain setting, check speaker impedance, and ensure bass boost is not set too high.

Figura 3: Abajo view del amplifier, showing the model and serial number label.

7. Especificaciones

8. Información de garantía

Infinity products are designed and manufactured to the highest quality standards. This product is covered by a limited warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region. Please refer to the warranty card included with your product or visit the official Infinity websitio para obtener información detallada sobre la garantía.

9. Atención al cliente

For technical assistance, troubleshooting, or warranty claims, please contact Infinity customer support. You can find contact information on the official Infinity websitio o a través de su distribuidor autorizado.

Websitio: www.infinityspeakers.com