aooshine Grey Touch Lamp with USB & Outlets

Aooshine Grey Touch Control Bedside Table Lamp Manual de usuario

Model: Grey Touch Lamp with USB & Outlets

Brand: aooshine

1. Introducción

Thank you for choosing the Aooshine Grey Touch Control Bedside Table LampEste lamp is designed to provide versatile lighting and convenient charging options for your bedroom, living room, or office. It features 3-way dimmable touch control, USB-A and USB-C charging ports, and dual AC outlets. Please read this manual thoroughly before use to ensure proper operation and safety.

2. Instrucciones de seguridad

  • Asegúrese de que lamp se desenchufa antes del montaje, la limpieza o el reemplazo de la bombilla.
  • No utilice la lamp en mojado odamp ambientes para evitar descargas eléctricas.
  • Use only the specified bulb type (E26 base LED bulb, 6W, 3000K) or an equivalent.
  • Mantén la lamp lejos de fuentes de calor y luz solar directa.
  • No intente desmontar ni reparar el lamp yourself. Contact customer support if needed.
  • Asegúrese de que el cable de alimentación no esté pellizcado ni dañado.

3. Contenido del paquete

Verifique que todos los componentes estén presentes en el paquete:

  • Lamp Base with integrated USB-A, USB-C, and Dual AC Outlets
  • Lamp Polo
  • Tela Lampsombra (gris)
  • E26 LED Dimmable Bulb (6W, 3000K)
  • Manual de usuario

4. Instrucciones de configuración

Follow these steps to assemble your Aooshine Bedside Table Lamp:

  1. Desempaquetar componentes: Retire con cuidado todas las piezas del embalaje.
  2. Adjuntar Lamp Polo: Al diablo con la lamp pole securely into the lamp base.
  3. Instalar bombilla: Atornille la bombilla LED E26 proporcionada en la lamp enchufe.
  4. Lugar Lampsombra: Position the fabric lampsombra sobre la lamp pole and secure it.
  5. Conectarse a la energía: Conecta el lamp's power cord into a standard AC outlet.
Assembled Aooshine bedside lamp with devices charging

Figure 1: Fully assembled lamp with charging devices.

Lamp base and shade structure

Figura 2: Lamp base and shade structure before final assembly.

5. Instrucciones de funcionamiento

5.1. Touch Control for Lighting

El lamp features a smart touch-sensitive sensor for easy control. Simply tap any metal part of the lamp base or pole to adjust the brightness.

  • Primer toque: Enciende el lamp at the lowest brightness setting (Night Light).
  • Segundo toque: Increases brightness to medium (Comfortable Light for general use).
  • Tercer toque: Activates the brightest setting (Reading Lamp).
  • Cuarto toque: convierte la lamp apagado.
Three brightness levels of the lamp: 30% sleep light, 65% comfortable light, 100% bright light

Figure 3: Demonstrating the 3-way dimmable touch control.

5.2. Charging Ports and AC Outlets

El lamp base is equipped with convenient charging options that function whether the lamp está encendido o apagado.

  • Puerto USB-A (5 V/2.1 A): Connect your devices using a standard USB-A cable for charging.
  • Puerto USB-C (5 V/2.1 A): Conecte sus dispositivos compatibles con USB-C para cargarlos.
  • Dual AC Outlets (120V): Plug in other electronic devices that require a standard wall outlet.
Lamp base showing USB-A, USB-C, and dual AC outlets with various devices charging

Figura 4: Sobreview of the 4-in-1 charging capabilities.

Video 1: Demonstrates the touch control and charging ports (USB-C & A) for bedroom, living room, and office use.

Video 2: Highlights the bedside lamp's USB port and touch control features.

6. Mantenimiento

  • Limpieza: Limpiar el lamp base and pole with a soft, dry cloth. Do not use abrasive cleaners or solvents. The fabric lampshade can be gently dusted.
  • Reemplazo de bombilla: Asegúrese de que lamp is unplugged. Allow the bulb to cool completely before replacing it. Use an E26 base LED bulb with a maximum wattagy de 6W.

7. Solución de problemas

ProblemaPosible causaSolución
Lamp no se enciende.Not plugged in, loose bulb, faulty bulb, power outage.Check power connection, tighten bulb, replace bulb, check power supply.
El control táctil no responde.Lamp is not properly grounded, electrical interference.Asegúrese de que lamp is on a stable surface and plugged into a grounded outlet. Try moving away from other electronics.
Los puertos de carga no funcionan.Device cable is faulty, device is not compatible, power issue.Try a different charging cable. Ensure the lamp is plugged in. Check device compatibility.
La luz parpadea.Bombilla suelta, bombilla incompatible, fuente de alimentación inestable.Tighten bulb, ensure correct bulb type is used, check power outlet.

8. Especificaciones

CaracterísticaDetalle
Marcaaooshine
Número de modeloGrey Touch Lamp with USB & Outlets
Dimensiones (D x W x H)4.72" de profundidad x 4.72" de ancho x 15.35" de alto
Peso del artículo0.635 onzas
Tipo de acabadoSliver Metal
Material basePlata
Color de sombraGris
Material de la sombraTela
Tipo de interruptorTocar
Característica especial3-Way Dimmable, Dual AC Outlets
Tipo de fuente de luzCONDUJO
Componentes incluidosBulbo
Base de la bombillaE26
Quétage6 vatios
Brillo680 lúmenes
Temperatura de color3000 Kelvin
Fuente de poderEléctrico con cable
Volumentage110 voltios (CA)
Salida USBUSB-A & Type-C (5V/2.1A)
Proceso de dar un títuloUL

9. Garantía y soporte

Aooshine is committed to providing high-quality, durable, and safe products. If you have any questions or require assistance with your product, please do not hesitate to contact our customer service team. We aim to provide quick and friendly service, addressing all inquiries within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official Aooshine store on Amazon: Aooshine Store.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.