1. Introducción
Thank you for choosing the BONTEC MD04 Sit-Stand Desk Converter. This product is designed to transform your existing desk into an ergonomic sit-stand workstation, promoting better posture and reducing strain during long working hours. Its two-tier design provides ample space for monitors, keyboards, and mice, while the gas spring mechanism allows for smooth and effortless height adjustments.
This manual provides essential information for the safe and efficient use of your desk converter. Please read it thoroughly before assembly and operation, and retain it for future reference.
2. Información de seguridad
Always ensure the desk converter is placed correctly on a stable and level surface. Do not exceed the maximum load capacity of 15 kg (33 lbs) to maintain stability and prevent accidents. Keep the work area clear of obstructions to avoid tripping hazards when adjusting the height. Ensure all cables are managed to prevent entanglement during height transitions. Avoid placing hands or fingers near moving parts during adjustment.
3. Contenido del paquete
Verifique que todos los componentes estén presentes antes de comenzar el ensamblaje:
- BONTEC MD04 Sit-Stand Desk Converter (Main Unit)
- Bandeja para teclado
- Two adhesive cable management clips
- Assembly Tools (if required, minimal assembly is needed)
4. Configuración
The BONTEC MD04 desk converter requires minimal assembly. Follow these steps to set up your workstation:
- Retire con cuidado todos los componentes del embalaje.
- Place the main unit of the desk converter on your existing desk in the desired position.
- Attach the keyboard tray to the designated slots on the main unit. Ensure it is securely fastened.
- Organize your monitors, keyboard, and mouse on the respective platforms.
- Use the provided adhesive cable management clips to secure any loose cables, maintaining a tidy workspace.
5. Instrucciones de funcionamiento
The BONTEC MD04 features a gas spring mechanism for smooth height adjustment. This allows you to effortlessly switch between sitting and standing positions.
5.1 Ajuste de altura
- To raise the workstation, gently squeeze the levers located on both sides of the upper platform.
- While holding the levers, guide the platform upwards to your desired standing height. Release the levers to lock the platform in place.
- To lower the workstation, gently squeeze the levers again. Apply slight downward pressure to guide the platform to your desired sitting height. Release the levers to lock it.
The height can be adjusted freely between 115 mm (4.5 inches) and 505 mm (19.9 inches).
6. Mantenimiento
To ensure the longevity and optimal performance of your BONTEC MD04 Sit-Stand Desk Converter, follow these simple maintenance guidelines:
- Limpieza: Limpie las superficies con adamp paño. Evite utilizar productos químicos fuertes o limpiadores abrasivos, ya que pueden dañar el acabado.
- Inspección: Revise periódicamente todos los tornillos y conexiones para asegurarse de que estén bien apretados. Vuelva a apretarlos si es necesario.
- Resorte de gas: The gas spring mechanism is designed for maintenance-free operation. Do not attempt to lubricate or disassemble it.
7. Solución de problemas
If you encounter any issues with your BONTEC MD04 Sit-Stand Desk Converter, please refer to the following common troubleshooting tips:
- Dificultad para ajustar la altura: Ensure that the levers on both sides are fully squeezed. Check that the weight on the desk converter does not exceed the maximum capacity of 15 kg (33 lbs).
- Tambaleo o inestabilidad: Verify that the desk converter is placed on a flat, stable surface. Check all assembly connections to ensure they are tight. Ensure the weight is evenly distributed on the platforms.
- Noise During Adjustment: A slight sound during adjustment is normal due to the gas spring mechanism. If the noise is excessive or unusual, ensure no parts are rubbing against each other or that the unit is not overloaded.
Si el problema persiste después de intentar estas soluciones, comuníquese con el servicio de atención al cliente.
8. Especificaciones
| Característica | Especificación |
|---|---|
| Número de modelo | MD04 |
| Marca | BONTEC |
| Dimensiones del producto (Pr. x An. x Al.) | 41 x 80 x 50.5 cm (16.1 x 31.5 x 19.9 pulgadas) |
| Top Platform Dimensions | 800 x 400 mm (31.5 x 15.7 pulgadas) |
| Altura mínima | 11.5 cm (4.5 pulgadas) |
| Altura máxima | 50.5 cm (19.9 pulgadas) |
| Capacidad de peso | 15 kg (33 libras) |
| Material | Madera de ingeniería (parte superior), acero de aleación (base) |
| Color | Negro |
| Características especiales | Adjustable, Ergonomic, Gas Spring Mechanism, Pre-drilled grommet hole for monitor mounts |
| Requiere ensamblaje | Mínimo |
9. Garantía
The BONTEC MD04 Sit-Stand Desk Converter comes with a Limited Warranty. This warranty covers manufacturing defects in materials and workmanship under normal use. Please refer to the product packaging or contact BONTEC customer support for specific terms and conditions of your warranty.
10. Soporte
For further assistance, technical support, or warranty claims, please contact BONTEC customer service through the retailer where you purchased the product or visit the official BONTEC webSitio. Tenga a mano el número de modelo (MD04) y la información de compra al contactar con el servicio de asistencia.
Recursos en línea: For additional product information, FAQs, and support, please visit the BONTEC Brand Store.