1. Producto terminadoview
The LIGHTAILING LED Light Kit is designed to enhance your LEGO Harry Potter Diagon Alley (Set 75978) model, bringing it to life with custom lighting. This kit includes all necessary components to illuminate various sections of your building blocks, creating a dynamic and immersive display. Please note that the LEGO model itself is not included with this light kit.
Figura 1: Frente view of the LEGO Harry Potter Diagon Alley model with LIGHTAILING LED lights installed.
Figura 2: Interior view of the LEGO Harry Potter Diagon Alley model with LIGHTAILING LED lights installed.
2. Información de seguridad
- Fuente de alimentación: Ensure the USB charger and voltage used are less than 5V to prevent damage to the light kit components.
- Manejo de la batería: When using battery boxes, ensure correct battery polarity. Do not mix old and new batteries, or different types of batteries.
- Pequeñas partes: Este kit contiene piezas pequeñas y no es adecuado para niños menores de 3 años debido al riesgo de asfixia.
- Cuidado de la instalación: Handle LED wires and components carefully. Avoid hard pulling, bending, or shaking to prevent damage.
3. Contenido del paquete
Your LIGHTAILING LED Light Kit package should contain the following items:
- LED Light Kit components (various lights and wires)
- 4 Battery Boxes
- 2 Conectores USB
- Installation Guide (paper instructions)
Figure 3: Contents of the LIGHTAILING LED Light Kit.
4. Instrucciones de configuración
Installation of the LIGHTAILING LED Light Kit is designed to be integrated with your LEGO Harry Potter Diagon Alley model. For detailed, step-by-step instructions, please refer to the included paper installation guide. The guide provides visual instructions to assist you through the process.
4.1 Powering the Light Kit
- Baterías: Prepare three AA batteries (not included) for each battery box. Insert them according to the polarity markings inside the battery box.
- Conexión USB: Alternatively, you can power the light kit using the provided USB connectors. Connect the USB cable to a power source (e.g., a USB wall adapter, power bank, or computer USB port) ensuring the voltage es menor que 5 V.
4.2 Consejos generales de instalación
- Install the LED lights carefully. Avoid excessive force on wires or components.
- Route wires neatly between LEGO bricks to conceal them and prevent damage.
- Test sections of the lighting as you install them to ensure proper function.
4.3 Guía de instalación en vídeo
For a visual walkthrough of the installation process, please refer to the official video guide below:
Video 1: Official installation guide for the LIGHTAILING LED Light Set for Harry Potter Diagon Alley.
5. Instrucciones de funcionamiento
Once the LIGHTAILING LED Light Kit is fully installed and connected to a power source (either batteries or USB), the lights will illuminate automatically. There are no additional switches or controls on the light kit itself; operation is dependent on the power supply.
- Encender: Ensure batteries are correctly inserted into the battery boxes, or the USB connector is plugged into a powered USB port.
- Apagar: Remove batteries from the battery boxes or disconnect the USB connector from the power source.
6. Mantenimiento
- Limpieza: Use a soft, dry cloth to gently wipe dust from the LED components and wires. Avoid using liquids or abrasive cleaners.
- Reemplazo de batería: Replace all batteries in a battery box simultaneously when lights dim or cease to function.
- Almacenamiento: If storing the LEGO model with the light kit installed, ensure the power source is disconnected to prevent battery drain or accidental activation.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Las luces no se encienden. | No power, incorrect battery installation, loose connection, damaged wire. | Check batteries (ensure they are new and correctly inserted). Verify USB connection. Inspect all wire connections for tightness. Ensure no wires are pinched or cut. |
| Algunas luces están tenues o parpadean. | Low battery power, loose connection. | Replace batteries. Check connections to ensure they are secure. |
| Lights are too bright/dim. | Power source issue (if using USB, ensure it's 5V). | Ensure your USB power source provides a stable 5V output. The kit does not feature adjustable brightness. |
If you encounter issues not covered here or require further assistance, please contact LIGHTAILING customer support.
8. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | LGK377 |
| Conjunto LEGO compatible | Harry Potter Diagon Alley (75978) |
| Tipo de fuente de luz | Diodo emisor de luz (LED) |
| Color | Warm White (primary), various accent colors |
| Fuente de poder | Battery Powered (3 AA batteries per box, not included) or USB Powered |
| Volumentage | 5 voltios (máximo) |
| Dimensiones del artículo (paquete) | 6.5 x 4.72 x 1.57 pulgadas (16.5 x 12 x 4 cm) |
| Peso del artículo | 5.6 onzas (160 gramos) |
| Material | Handmade components |
9. Garantía y soporte
LIGHTAILING is committed to providing quality products and customer satisfaction. If you encounter any issues with your LED Light Kit or have questions regarding installation or operation, please do not hesitate to contact our customer support team. While specific warranty details are not provided in this manual, we encourage you to reach out for assistance with any problems you may experience.
Información del contacto: Please refer to the product packaging or the official LIGHTAILING webSitio para obtener los detalles de contacto de atención al cliente más actualizados.