Producto terminadoview
The Milesight MS-C2972-FIPB is a 2MP Pro Dome IP Day/Night Network Camera designed for robust surveillance applications. It features remote focus and zoom capabilities, an IK10 vandal-proof and IP66 weather-resistant casing, and advanced imaging technologies like 140 dB WDR (Wide Dynamic Range) and Smart IR II for superior image quality in varying light conditions.
This camera supports H.265 video compression for efficient storage and bandwidth usage, and includes a 256GB MicroSD card slot for on-board storage. It is fully ONVIF compliant, ensuring broad compatibility with various network video recorders (NVRs) and video management systems (VMS).
Características principales
- Motorized Zoom and Focus: Allows for remote adjustment of the camera's field of view y nitidez.
- IK10 Vandal-proof & IP66 Weather-resistant: Ensures durability and protection against impact and harsh environmental conditions, suitable for outdoor use.
- 140 dB WDR: Provides clear images in scenes with strong contrast, such as bright backlighting.
- Smart IR II: Advanced infrared technology for uniform illumination in low-light conditions, preventing overexposure of close objects.
- Compresión H.265+: Reduces bandwidth and storage requirements significantly compared to older compression standards.
- 256GB MicroSD Support: Enables on-board storage for local recording and redundancy.
- Full ONVIF Compliance: Ensures interoperability with a wide range of surveillance equipment.
- SIP/VoIP Support: Integrates voice and video over IP for enhanced communication capabilities.
Configuración e instalación
Contenido del paquete
Antes de comenzar la instalación, asegúrese de que todos los componentes estén presentes:
- Milesight MS-C2972-FIPB IP Camera
- Plantilla de montaje
- Tornillos de montaje y tacos de pared
- Conector impermeable para cable Ethernet
- Guía de inicio rápido
Montaje de la cámara
The MS-C2972-FIPB is designed for ceiling mount installation. Follow these steps:
- Prepare la superficie de montaje: Choose a suitable location on a ceiling or wall that can support the camera's weight and provides the desired field of view.
- Detach the Mounting Plate: Rotate the camera body counter-clockwise to detach it from the mounting plate. This plate will be secured to the surface first.
- Marcar los agujeros de perforación: Use the provided mounting template to mark the positions for drilling holes on the mounting surface.
- Perforar agujeros: Drill holes according to the marked positions. Insert wall plugs if mounting on a masonry surface.
- Placa de montaje segura: Attach the mounting plate to the surface using the provided screws.
- Conectar cables: Route the Ethernet cable through the mounting plate and connect it to the camera's RJ45 port. Ensure a waterproof connection using the supplied connector for outdoor installations. If not using PoE, connect the DC12V power supply.
- Coloque el cuerpo de la cámara: Align the camera body with the mounting plate and rotate clockwise until it locks securely into place.
Network Connection and Initial Setup
The camera supports Power over Ethernet (PoE) for simplified installation, requiring only one Ethernet cable for both power and data. Alternatively, it can be powered by a 12V DC adapter.
- Conectarse a la red: Connect the camera to your network switch or router using an Ethernet cable. If using PoE, ensure your switch supports PoE (802.3af).
- Descubra la cámara: Use the Milesight Smart Tools software (available on the Milesight websitio) para descubrir la cámara en su red.
- Asignar dirección IP: Assign a static IP address or configure DHCP for the camera.
- Acceso Web Interfaz: Abrir una web Navegador e ingrese la dirección IP de la cámara para acceder a su web interfaz.
- Inicio de sesión inicial: Log in using the default username and password (refer to the Quick Start Guide for default credentials). It is highly recommended to change the default password immediately for security.
- Actualización de firmware: Busque e instale todas las actualizaciones de firmware disponibles para garantizar un rendimiento y una seguridad óptimos.
Operación de la cámara
Remote Focus and Zoom
The MS-C2972-FIPB features a motorized varifocal lens, allowing you to adjust the zoom and focus remotely from the camera's web interface or compatible NVR/VMS software. This eliminates the need for manual adjustment at the camera's physical location.
Configuración de vídeo
Access the "Video" settings in the web Interfaz para configurar:
- Resolución: Up to 1920x1080 (2MP).
- Velocidad de cuadros: Adjust for desired smoothness of video.
- Compresión: Select H.265+, H.265, H.264+, H.264, or MJPEG. H.265+ is recommended for efficiency.
- Velocidad de bits: Configure constant (CBR) or variable (VBR) bit rates.
- Configuración de imagen: Adjust brightness, contrast, saturation, sharpness, WDR, and noise reduction.
- Enmascaramiento de privacidad: Define up to 8 areas to be masked for privacy concerns.
Configuración de audio
The camera includes a built-in microphone and supports two-way audio via an audio output interface. Configure audio settings under the "Audio" section:
- Compresión de audio: G.711, AAC, G.722, G.726.
- Ganancia del micrófono: Adjust sensitivity of the built-in microphone.
- Audio bidireccional: Enable and configure for interactive communication.
Almacenamiento y grabación
The camera supports local storage on a MicroSD card up to 256GB. Configure recording schedules, motion detection recording, and continuous recording options in the "Storage" settings.
SIP/VoIP Integration
The MS-C2972-FIPB supports SIP/VoIP for voice and video-over-IP functionality. This allows for integration with VoIP systems for advanced communication and monitoring. Refer to the "System" or "Network" settings for SIP/VoIP configuration.
Mantenimiento
Limpieza
- Cubierta de lente y domo: Regularly clean the camera lens and the transparent dome cover with a soft, clean cloth. For stubborn dirt, use a mild, non-abrasive cleaning solution specifically designed for optical surfaces. Avoid harsh chemicals that could damage the coating.
- Cuerpo de cámara: Limpie el cuerpo de la cámara con publicidad.amp paño para quitar el polvo y la suciedad.
Actualizaciones de firmware
Consulte periódicamente el sitio oficial de Milesight website for new firmware versions. Keeping the firmware updated ensures optimal performance, introduces new features, and addresses potential security vulnerabilities.
- Descargue el último firmware file from the Milesight support page.
- Acceder a la cámara web interfaz y navegue a la sección "Sistema" o "Mantenimiento".
- Follow the on-screen instructions to upload and install the firmware. Do not power off the camera during the update process.
Consideraciones ambientales
Although the camera is IP66 rated for weather resistance, extreme conditions can still affect performance. Ensure proper drainage around the camera if installed in areas prone to heavy rain or snow accumulation. Avoid direct exposure to prolonged strong sunlight if possible, as this can affect image quality and component lifespan.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La cámara no se enciende. | Sin fuente de alimentación; PoE no activo; cable defectuoso. | Check power adapter/PoE switch. Ensure Ethernet cable is properly connected and functional. |
| No se puede acceder a la cámara a través de web navegador. | Dirección IP incorrecta; problema de conectividad de red; bloqueo de firewall. | Verify IP address. Check network cable. Temporarily disable firewall on PC. Use Milesight Smart Tools to discover camera. |
| Poor image quality (blurry, dark, overexposed). | Lens out of focus; incorrect image settings; dirty lens/dome; insufficient IR illumination. | Adjust focus remotely. Configure brightness, contrast, WDR, and IR settings. Clean lens and dome cover. |
| No video recording to MicroSD card. | MicroSD card full/faulty; recording schedule not configured; motion detection not triggered. | Check MicroSD card status and format if necessary. Verify recording schedule and motion detection settings. |
| Vandalism or physical damage. | External impact. | The camera is IK10 vandal-proof, but extreme force can still cause damage. Contact support for repair options. |
Presupuesto
| Característica | Detalle |
|---|---|
| Número de modelo | MS-C2972-FIPB |
| Sensor de imagen | CMOS de escaneo progresivo de 1/2.8" |
| Resolución máxima de imagen | 1920x1080 (2MP) |
| Iluminación mínima | Color: 0.002Lux@F1.2; B/W: 0Lux with IR on |
| Tipo de lente | Motorized P-IRIS varifocal 3.0~10.5mm (Optional: 2.7~13.5mm/ 7~22mm) |
| Distancia IR | Up to 50m (3.0~10.5mm lens); Up to 90m (7~22mm lens) |
| Compresión de vídeo | H.265+/ H.265(HEVC)/ H.264+/ H.264/MJPEG |
| Amplio rango dinámico (WDR) | 140 dB Super WDR |
| Entrada/salida de audio | Micrófono incorporado y 1 interfaz de salida de audio |
| Almacenamiento | Support micro SD/SDHC/SDXC Card, up to 256GB |
| Interfaz de red | 1 puerto Ethernet RJ45 de 10 m/100 m. |
| Compatibilidad del sistema | ONVIF Profile G&Q&S&T, API |
| Fuente de alimentación | PoE (802.3af) / DC12V±10% |
| Consumo de energía | 8W Max; 12W Max (With IR on) |
| Dimensiones | Φ143mm x 108.4mm (5.63 x 4.27 x 4.27 inches) |
| Peso | Aprox. 3.28 libras |
| Protección de ingreso | IP66 |
| Resistencia al vandalismo | IK10 |
Garantía y soporte
Specific warranty details for the Milesight MS-C2972-FIPB camera are typically provided at the point of purchase or can be found on the official Milesight webSitio web. Conserve su comprobante de compra para reclamaciones de garantía.
For technical support, product inquiries, or service requests, please visit the official Milesight support portal or contact their customer service. Contact information is usually available on the manufacturer's websitio.
Note: This manual provides general guidance. For detailed technical specifications and advanced configurations, please refer to the complete product documentation available on the Milesight official websitio.
