1. Producto terminadoview
The Qingping Digital Bluetooth Thermometer Hygrometer is designed to provide accurate, real-time temperature and humidity readings for indoor environments. Featuring an E Ink display for clear visibility from various angles, this compact device offers multiple mounting options and long battery life. It can connect to the Qingping+ app for remote data access and historical data tracking.
Figure 1: Qingping Thermometer Hygrometer and its companion app interface.
2. Configuración
2.1. Instalación de la batería
The device uses one CR2430 Lithium Metal button cell battery, which is included. To install or replace the battery:
- Localice la tapa del compartimiento de la batería en la parte posterior del dispositivo.
- Twist the cover counter-clockwise to open it.
- Inserte la batería CR2430 con el lado positivo (+) hacia arriba.
- Vuelva a colocar la tapa y gírela en el sentido de las agujas del reloj para asegurarla.
Figure 2: Battery compartment showing the CR2430 battery.
2.2. Opciones de montaje
The Qingping Thermometer Hygrometer offers versatile placement options:
- Colocación de escritorio: Open the back cover to an angle of 90 degrees to the body. This allows the device to stand upright on a flat surface.
- Montaje en pared: Use the supplied wall sticker. Attach the sticker to a clean, dry wall surface, then attach the monitor to the sticker. The monitor has built-in magnets, and the wall sticker contains an iron plate for secure attachment.
- Fijación magnética: The device has built-in magnets, allowing it to be directly attached to iron surfaces, such as a refrigerator door.
Figure 3: Desktop and Wall mounting configurations.
3. Instrucciones de funcionamiento
3.1. E Ink Display
The E Ink display provides clear, paper-like readings of temperature and humidity. It offers ultra-wide viewing angles and high contrast for easy readability from various positions in a room.
Figure 4: Features of the E Ink display.
3.2. Cambio de unidades de temperatura
To switch between Fahrenheit (°F) and Celsius (°C), press the button located on the back of the product.
3.3. App Connection and Remote Monitoring (Qingping+ App)
To access temperature and humidity data remotely, download the Qingping+ app from the Google Play Store or Apple App Store. A Qingping Bluetooth Gateway (sold separately) is required for remote access functionality.
Figure 5: Remote monitoring via the Qingping+ app.
3.4. Historical Data Recording
The device tracks and saves data for up to 30 days. This historical data can be viewed as graphical statistics within the Qingping+ app and can also be exported in CSV format if needed.
Figure 6: Historical data viewable in the Qingping+ app.
4. Mantenimiento
4.1. Duración y reemplazo de la batería
The device features low power consumption, providing approximately 10 months of battery life in normal indoor environments. When the battery is low, a battery icon will appear on the display. Refer to Section 2.1 for battery replacement instructions.
4.2. Cuidado y limpieza
Para garantizar lecturas precisas y prolongar la vida útil del dispositivo:
- Limpie el dispositivo con un paño suave y seco. No utilice limpiadores abrasivos ni lo sumerja en agua.
- Avoid placing the product in environments with humidity consistently higher than 90% for long-term use, as this may affect performance.
- No bloquee el orificio de ventilación en la parte inferior del producto.
5. Solución de problemas
- Lecturas inexactas:
- Ensure the device is placed in a stable environment, away from direct sunlight, drafts, or heat sources.
- Allow approximately 15 minutes for the readings to stabilize after initial setup or significant environmental changes.
- Verify the vent hole on the bottom of the product is not blocked.
- Display Issues (e.g., "188" displayed):
- This indicates a factory reset or an error. Press and hold the button on the back of the product until the screen displays "188", then release. Wait for the product to return to correct temperature and humidity readings.
- No Data in App / Connection Issues:
- Asegúrese de que Bluetooth esté habilitado en su teléfono inteligente y que el dispositivo esté dentro del alcance.
- For remote access, confirm that a Qingping Bluetooth Gateway is properly set up and connected.
- Check the battery level of the device.
- Restart the Qingping+ app and/or your smartphone.
6. Especificaciones
| Característica | Detalle |
|---|---|
| Número de modelo | wdl-1157 |
| Dimensiones | 2.91 x 0.63 x 2.91 pulgadas |
| Peso | 3.53 onzas |
| Rango de temperatura | 32 ~ 122 °F (0 ~ 50 °C) |
| Rango de humedad | 0% ~ 99.9%RH (under no condensation circumstances) |
| Precisión de temperatura | 0.1° |
| Tipo de batería | 1 x CR2430 litio metálico (incluido) |
| Duración de la batería | Approx. 10 months (in normal indoor environments) |
| Conectividad | Bluetooth de bajo consumo |
| Almacenamiento de datos | Up to 30 days (viewable in Qingping+ app) |
Figure 7: High accuracy sensor from Sensirion.
7. Garantía y soporte
For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Qingping websitio. Guarde su recibo de compra para reclamos de garantía.
For further assistance, you may also contact Qingping customer service through their official channels.