TEEM Adjustable Clamp Escritorio Lamp (Model TEEM3535) User Manual

Introducción

Thank you for choosing the TEEM Adjustable Clamp Escritorio LampEste manual proporciona información esencial para el uso seguro y eficiente de su nuevo lampLea atentamente estas instrucciones antes de la instalación y el funcionamiento, y consérvelas para futuras consultas.

Información de seguridad

• Ensure the power supply is disconnected before installation, cleaning, or bulb replacement.
• Utilice únicamente bombillas con casquillo E26 y un voltaje máximo de 12 V.tage of 60W (LED or incandescent). Exceeding this limit may cause overheating or damage.
• No opere el lamp con un cable o enchufe dañado.
• Mantén la lamp lejos del agua o damp entornos.
• Asegúrese de que el clamp is securely fastened to a stable surface to prevent the lamp de caer.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar el ensamblaje:

• Lamp Unit with Swing Arm and Shade
• Escritorio Clamp Base
• Round Desktop Base (Optional, may be included depending on package)
• Power Cord with On/Off Switch

Instrucciones de instalación

Follow these steps to assemble and set up your TEEM Desk Lamp:

1. Choose Your Mounting Option: Decidir si se debe utilizar el clamp base for space-saving attachment to a desk edge or the round desktop base for freestanding placement.
2. Montar la Lamp Brazo: Insert the bottom pin of the lamp arm into the designated hole on your chosen base (either the clamp or the round desktop base). Ensure it is firmly seated.

Figura 1: Lamp arm assembly into the round base (left) or clamp base (right).

3. Asegure la Lamp (if using clamp): Si usa el clamp base, attach it to the edge of your desk or workbench. Tighten the screw mechanism until the clamp is firmly secured and the lamp es estable

Figure 2: The TEEM desk lamp cl de forma seguraamped to a desk surface.

4. Coloque la Lamp (if using round base): If using the round desktop base, place the lamp sobre una superficie plana y estable.

Figure 3: The TEEM desk lamp positioned on a desk using its round desktop base.

5. Instale la bombilla: Carefully screw an E26 base bulb (not included) into the lamp socket. Ensure the bulb does not exceed 60W.
6. Conectarse a la energía: Conecte el cable de alimentación a una toma eléctrica estándar.

Instrucciones de funcionamiento

Your TEEM Desk Lamp is designed for flexible and convenient lighting:

• Encendido/apagado: Use the in-line switch located on the power cord to turn the lamp encendido o apagado.
• Adjusting the Swing Arm: El lamp features a multi-joint swing arm (22 cm + 22 cm / 8.7 in + 8.7 in) that allows for extensive reach and positioning. Gently move the arm to direct light as needed. The springs provide balance and hold the arm in place.
• Rotating the Shade: El lamp head can rotate 360 degrees. Adjust the shade to focus light precisely on your workspace and minimize glare.

Figure 4: The TEEM desk lamp providing illumination over a workspace.

Figure 5: The TEEM desk lamp adjusted to illuminate a book for reading.

Mantenimiento

Limpieza

• Desenchufe siempre el lamp Antes de limpiar.
• Limpiar el lamp Con un paño suave y seco. No utilice limpiadores abrasivos ni disolventes, ya que pueden dañar el acabado.

Reemplazo de bombilla

• Asegúrese de que lamp is unplugged and the bulb has cooled completely before attempting to replace it.
• Carefully unscrew the old bulb from the E26 socket.
• Screw in a new E26 base bulb, ensuring it does not exceed 60W.

Solución de problemas

Presupuesto

Figure 6: Detailed dimensions of the TEEM Adjustable Clamp Escritorio Lamp.

Garantía y soporte

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Keep your purchase receipt as proof of purchase.