EGLO Palmaves 3 Dimmable LED Ceiling Light

Introducción

Welcome to the EGLO Palmaves 3 Dimmable LED Ceiling Light instruction manual. This guide provides essential information for the safe and efficient use of your new lighting fixture. Please read these instructions carefully before installation and retain them for future reference.

The EGLO Palmaves 3 features a modern design with two interlocking LED rings, offering adjustable brightness, color temperature from warm white to cool white, and indirect RGB colored lighting, all controllable via the included remote.

Image: EGLO Palmaves 3 LED Ceiling Light, front view.

Instrucciones de seguridad

• Always disconnect power at the main fuse or circuit breaker before installation, maintenance, or any service.
• La instalación debe ser realizada por un electricista calificado de acuerdo con los códigos y regulaciones eléctricas locales.
• Do not modify the fixture. Use only specified parts and accessories.
• Ensure the mounting surface can safely support the weight of the fixture.
• Evite la exposición directa de los ojos a la fuente de luz LED.
• Mantenga el control remoto alejado del agua y de temperaturas extremas.

Contenido del paquete

Verifique que todos los componentes estén presentes y sin daños antes de comenzar la instalación:

• EGLO Palmaves 3 LED Ceiling Light Fixture
• Mando a distancia
• Herrajes de montaje (tornillos, tacos)
• Manual de instrucciones

Configuración e instalación

Importante: Ensure the main power supply is turned off before any installation work.

1. Preparación: Turn off the main power supply at the circuit breaker. Confirm the power is completely disconnected using a voltage probador.
2. Calificación: Hold the mounting bracket against the ceiling at the desired installation location. Mark the positions for drilling holes.
3. Perforación: Drill holes at the marked positions. Insert appropriate wall plugs (if necessary for your ceiling type) into the drilled holes.
4. Soporte de montaje: Fije el soporte de montaje al techo con los tornillos incluidos. Asegúrese de que esté firmemente fijado.
5. Alambrado: Connect the electrical wires from the ceiling to the terminal block on the fixture. Ensure correct polarity: Live (L), Neutral (N), and Earth (⍎). If unsure, consult a qualified electrician.
6. Fijar el accesorio: Carefully attach the ceiling light fixture to the mounting bracket, securing it with the provided screws or fasteners. Ensure the fixture is stable and flush with the ceiling.
7. Encendido: Restablezca la energía en el disyuntor principal.
8. Configuración del control remoto: Inserte 2 pilas AAA (no incluidas) en el control remoto, observando la polaridad correcta.

Imagen: En ángulo view of the EGLO Palmaves 3 LED Ceiling Light, showing its two interlocking rings.

Instrucciones de funcionamiento

Your EGLO Palmaves 3 ceiling light can be controlled via the included remote control or a standard wall switch.

Funciones del control remoto:

The remote control allows for full functionality of your ceiling light.

Image: EGLO Palmaves 3 Remote Control.

• Botón de encendido (Encendido/Apagado): Enciende o apaga la luz.
• Ajuste de brillo: Use the sun icons (brighter/dimmer) to adjust the light intensity.
• Color Temperature Adjustment (K+/K-): Changes the white light from warm white (3000 Kelvin) to neutral white to cool white (6500 Kelvin).
• RGB activado/desactivado: Activates or deactivates the indirect RGB colored lighting.
• Selección de color RGB: Use the 'R G B' button to cycle through various RGB colors or the dedicated RGB button for specific color modes.
• Función de memoria: The light retains the last used settings (brightness, color temperature, RGB color) when turned off and on via the remote control.

Control del interruptor de pared:

If you do not use the remote control, you can cycle through different white light color temperatures (warm white, neutral white, cool white) by repeatedly turning the wall switch off and on quickly.

Image: EGLO Palmaves 3 emitting warm white light.

Image: EGLO Palmaves 3 with indirect RGB red lighting.

Mantenimiento

• Limpieza: Desconecte la alimentación antes de limpiar. Limpie el artefacto con un paño suave, seco o ligeramente húmedo.amp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electrical components.
• LED: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the LED components. If the LEDs fail, the entire fixture may need replacement.

Solución de problemas

If you encounter issues with your EGLO Palmaves 3 ceiling light, refer to the following common problems and solutions:

• La luz no enciende:
  • Compruebe si la fuente de alimentación está conectada y el disyuntor está encendido.
  • Asegúrese de que las pilas del control remoto estén correctamente insertadas y no agotadas. Reemplácelas si es necesario.
  • Verify all wiring connections are secure at the terminal block.
• El control remoto no funciona:
  • Reemplace las baterías AAA en el control remoto.
  • Ensure there are no obstructions between the remote control and the light fixture.
  • Confirm you are within the remote control's operating range.
• La luz parpadea o se atenúa inesperadamente:
  • Check for a stable power supply to the fixture.
  • Ensure the dimming function is not accidentally activated or set to a very low level.

If problems persist after attempting these solutions, contact EGLO customer support or a qualified electrician.

Presupuesto

Detailed technical specifications for the EGLO Palmaves 3 LED Ceiling Light:

Dimensiones:

• Large Light Element Diameter: 39 cm (15.35 inches)
• Small Light Element Diameter: 29 cm (11.42 inches)
• Altura: 6.8 cm (2.68 pulgadas)
• Longitud total: 56 cm (22.05 pulgadas)

Image: Dimensions of the EGLO Palmaves 3 LED Ceiling Light.

Image: Key features including energy-saving LEDs, plastic construction, and 3000-6500K color temperature range.

Garantía y soporte

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official EGLO website. EGLO is committed to providing quality products and customer satisfaction.

Contact EGLO customer service for further assistance with product inquiries, troubleshooting, or warranty claims.