Manual de usuario del chasis para PC Sharkoon RGB SLIDER WT de torre media

1. Introducción

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view de componentes internos.

Imagen 1.1: Vista frontal view of the Sharkoon RGB SLIDER WT PC Case, showcasing la tira de LED RGB y el panel lateral de vidrio templado.

2. Contenido del paquete

Por favor verifique que todos los artículos estén presentes en el paquete:

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. Especificaciones

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. Configuración e instalación

4.1. Preparación

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Instalación de la placa base

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. Asegure la placa base utilizando los tornillos provistos.

Imagen 4.1: Interior view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. Instalación de la fuente de alimentación (PSU)

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. Asegure la fuente de alimentación con tornillos desde la parte trasera de la carcasa.

4.4. Instalación del dispositivo de almacenamiento

The case supports 3.5" HDDs and 2.5" SSDs.

• Discos duros de 3.5": Install into the drive cage located within the PSU tunnel.
• Unidades SSD de 2.5": Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

Imagen 4.2: Interior trasero view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. Retire las cubiertas de las ranuras PCIe necesarias de la parte trasera de la carcasa.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. Asegure la tarjeta con tornillos.

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• Ventiladores delanteros: Remove the front panel to access the mounting points for up to three 120mm fans.
• Mayores fanáticos: Mount up to two 120mm or 140mm fans to the top panel.

4.7. Gestión de cables

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. Instrucciones de funcionamiento

5.1. Encendido

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

Imagen 5.1: Arriba view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. Control de iluminación RGB

The front RGB LED strip can be controlled in two ways:

• Built-in Controller: Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• Motherboard ARGB Sync: Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

The front I/O panel provides convenient access to:

• 2x USB 3.0 ports for high-speed data transfer.
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. Mantenimiento

6.1. Limpieza

• Exterior: Limpie las superficies exteriores con un paño suave, damp paño. Evite los limpiadores abrasivos.
• Filtros de polvo: Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• Interior: Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. Flujo de aire

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. Solución de problemas

7.1. El sistema no se enciende

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• Asegúrese de que el interruptor de encendido de la fuente de alimentación esté en la posición "ENCENDIDO".
• Verifique que el cable del botón de encendido del panel frontal esté conectado correctamente al encabezado del panel frontal de la placa base.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Los ventiladores no giran

• Verifique las conexiones de alimentación del ventilador a la placa base o al controlador del ventilador.
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. La iluminación RGB no funciona

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. Los puertos USB/audio del panel frontal no funcionan

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. Garantía y soporte

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon websitio: www.sharkoon.com