Manual de usuario del mando inalámbrico Binbok Joypad para Nintendo Switch

1. Información de seguridad

Lea atentamente todas las instrucciones de seguridad antes de usar este producto. El incumplimiento de estas instrucciones podría provocar lesiones o daños al producto.

• Mantenga el controlador alejado del agua y otros líquidos.
• No exponga el controlador a temperaturas extremas ni a la luz solar directa.
• Evite dejar caer o someter el controlador a impactos fuertes.
• No intente desmontar ni modificar el controlador. Esto anulará la garantía.
• Utilice únicamente el cable de carga proporcionado o un equivalente certificado.
• Mantener fuera del alcance de los niños pequeños.

2. Producto terminadoview

The binbok Joypad Wireless Controller is designed to enhance your gaming experience on the Nintendo Switch. It offers a comfortable, ergonomic grip and advanced features for precise control.

Image: The binbok Joypad Wireless Controller, showcasing su diseño ergonómico y disposición de botones.

Componentes clave:

• Left and Right Joypads
• Analog Sticks (Left and Right)
• Mando direccional
• Botones de acción (A, B, X, Y)
• Shoulder Buttons (L, R, ZL, ZR)
• Botón de inicio
• Botón de captura de pantalla
• Botón Turbo
• Mapping Button (M)
• Puerto de carga USB-C

3. Características

This controller is equipped with several features to enhance your gameplay:

Imagen: Más alláview of the binbok wireless Joy-Con features including wireless connectivity, vibration, 6-axis gyro, turbo, lighting mode, and mapping.

3.1. 8-Color LED Ring Light

The controller features an adjustable LED ring light with 8 different colors and 3 lighting modes, allowing for customization and visual flair during gameplay.

Image: Illustration showing the two Joypads separated, surrounded by circles of 8 different colors, representing the LED lighting feature.

3.2. Función Turbo Ajustable

Set the turbo rate to 5, 12, or 20 times per second, depending on the game type, for rapid button presses.

3.3. Motores de vibración dual

Experience enhanced game immersion with dual vibration motors that provide excellent haptic feedback. Vibration intensity can be adjusted.

Image: Illustration of a single binbok Joypad with concentric circles indicating vibration, and a vertical bar showing adjustable vibration levels (30%, 50%, 75%, 100%).

3.4. Mapping Function

Customize your controls by mapping any X/Y/A/B/Z/L button to the back rectangle button, making hard-to-reach actions easier to activate.

Image: Diagram illustrating the Turbo function setup (Press Turbo button with X/Y/A/B...) and the Mapping function setup (M + X/Y/A/B... to set up).

3.5. Ergonomic & Non-Slip Design

Designed for comfort, the controller fits nicely in your hands, providing a non-slip grip for stable control during long gaming sessions.

Image: Two binbok Joypads shown from the side, highlighting their non-slip textured grip.

3.6. 6-Axis Gyro

Built-in precise 6-axis gyro motion sensors accurately sense changes in direction and visual field, offering immersive motion control.

Image: Three panels illustrating the 6-Axis Gyro feature: 'Adjust Action' (controller attached to Switch), 'Adjust Direction' (controller attached to Switch), and 'Adjust Vision' (controller held separately).

4. Configuración y emparejamiento

Follow these steps to connect your binbok Joypad Wireless Controller to your Nintendo Switch:

1. Encienda el controlador: Press and hold the Home button (marked 'H' under the controller icon) on the controller for approximately 5 seconds until the LED indicator starts flashing. This indicates it's in pairing mode.
2. Access Switch Controller Settings: On your Nintendo Switch console, navigate to the 'Controllers' menu, then select 'Change Grip/Order'.
3. Emparejar el controlador: While the Switch is searching for controllers, the binbok controller's LED will continue to flash. Once detected, press the 'A' button on the binbok controller to confirm the connection. The LED will become solid to indicate successful pairing.
4. Listo para jugar: Your controller is now paired and ready for use.

The controller can be used in three different play modes:

Image: Illustration of three play modes: Wireless Mode (controllers held separately), Table Mode (Switch on stand, controllers held separately), and Mobile Mode (controllers attached to Switch).

5. Instrucciones de funcionamiento

5.1. Adjusting LED Colors and Modes

• To change the LED color: Press and hold the 'T' button, then click the left analog stick. Repeat to cycle through colors.
• To change lighting mode: (Specific instructions not provided, assume similar combination or dedicated button if available. For this manual, we'll keep it general as '3 lighting modes' are mentioned in features).

5.2. Setting Turbo Function

1. Press and hold the 'Turbo' button.
2. While holding 'Turbo', press the action button (e.g., A, B, X, Y) you wish to assign the turbo function to.
3. To adjust turbo speed: Press and hold the 'Turbo' button, then push the right analog stick up or down to cycle through speed settings (5/12/20 times per second).
4. To clear turbo: Repeat step 1 and 2 for the assigned button.

5.3. Ajuste de la intensidad de la vibración

The vibration intensity can be adjusted to suit your preference:

• Mantenga presionado el botón 'T'.
• While holding 'T', push the left analog stick up to increase vibration or down to decrease vibration.

5.4. Using the Mapping Function

The back button (M) can be programmed to replicate other buttons:

1. Press and hold the 'M' button.
2. While holding 'M', press the button you want to map (e.g., X, Y, A, B, L, R, ZL, ZR).
3. Release both buttons. The 'M' button will now perform the function of the mapped button.
4. To clear mapping: Press and hold the 'M' button for 3 seconds until the controller vibrates.

6. Mantenimiento

6.1. Carga del controlador

The binbok Joypad Wireless Controller is rechargeable. Connect the provided USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter, computer USB port).

• Una carga completa suele tardar entre 2 y 3 horas.
• A fully charged controller provides approximately 10 hours of continuous gameplay.
• The LED indicators will show charging status and battery level.

Image: Illustration of two binbok Joypads with a circular gauge indicating battery capacity (500mAh x 2) and charging time.

6.2. Limpieza y almacenamiento

• Limpie el controlador con un paño suave y seco. No utilice productos químicos agresivos ni materiales abrasivos.
• Guarde el controlador en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.
• If storing for an extended period, ensure the controller is fully charged to maintain battery health.

7. Solución de problemas

7.1. Controller Not Pairing

• Asegúrese de que el controlador esté cargado.
• Verifique que la consola Switch esté actualizada al firmware más reciente.
• Reinicie tanto la consola Switch como el controlador.
• Try pairing again by holding the Home button for 5 seconds and following the Switch's 'Change Grip/Order' steps.
• If issues persist, try resetting the controller (refer to manufacturer's specific reset instructions if available, otherwise a long press of the Home button or a small reset button if present).

7.2. Retraso de entrada o desconexiones

• Asegúrese de que no haya obstrucciones entre el controlador y la consola Switch.
• Acérquese a la consola Switch para mejorar la intensidad de la señal.
• Minimiza la interferencia de otros dispositivos inalámbricos.
• Check for low battery on the controller.

7.3. Los botones no responden

• Compruebe si el controlador está emparejado correctamente.
• Asegúrese de que el controlador esté cargado.
• Test buttons in the Switch's controller test menu to diagnose specific button failures.
• If a button is mapped, ensure the mapping is correct or clear it to revert to default.

8. Especificaciones

9. Garantía y soporte

For warranty information or technical support, please refer to the product packaging or contact binbok customer service directly. Keep your purchase receipt for warranty claims.