Manual del usuario del decodificador de audio y video 4K HaiweiTech HHD-101

1. Introducción

The HaiweiTech HHD-101 is a versatile H.265/H.264 4K Video Audio Decoder designed for various professional applications, including advertisement displays, video encoding, and IP camera decoding. It supports a wide range of IP protocols such as RTMP, RTSP, RTP, HTTP, HLS, and UDP, and offers both HDMI (up to 4K@30FPS) and CVBS/BNC outputs. This manual provides comprehensive instructions for the setup, operation, and maintenance of your HHD-101 decoder.

2. Información de seguridad

• Ensure the device is powered by a 12V 2A power supply. Using an incorrect power supply may damage the unit.
• No exponga el dispositivo al agua, la humedad o temperaturas extremas.
• Evite colocar el dispositivo bajo la luz solar directa o cerca de fuentes de calor.
• No intente abrir ni reparar el dispositivo usted mismo. Encargue cualquier reparación a personal cualificado.
• Asegúrese de que haya una ventilación adecuada alrededor del dispositivo para evitar el sobrecalentamiento.
• Desconecte la alimentación antes de limpiar o mover el dispositivo.

3. Contenido del paquete

Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor immediately.

• HaiweiTech HHD-101 Decoder Unit
• Adaptador de corriente de 12V
• Manual de usuario (este documento)

4. Producto terminadoview

Familiarize yourself with the various ports and indicators on the HHD-101 decoder.

Figura 4.1: Panel frontalview of HHD-101 Decoder.

Figura 4.2: Panel trasero terminadoview of HHD-101 Decoder.

Figure 4.3: Detailed Port Diagram and Descriptions.

Descripciones de puertos:

1. LAN (Ethernet port): Used for network connection. Configuration of the IP gateway may be required for normal operation.
2. Indicadores LED:
   • Red: Power ON
   • Green: Network activity
3. RST (Restablecer): Press and hold the RST button until the green LED light turns off to reset the device.
4. AV OUT (CVBS out): Salida de vídeo compuesto.
5. HDMI OUT (HDMI out): Salida de interfaz multimedia de alta definición.
6. BNC OUT (BNC out): Conector BNC para salida de vídeo.
7. RS485: Serial communication port (GEN, IO-1, IO-2, 485A, 485B).
8. Poder en: 12V 2A DC power input.

5. Configuración

Follow these steps to set up your HHD-101 decoder:

1. Conecte la electricidad: Connect the provided 12V 2A power adapter to the "Power In" port (8) on the rear panel of the decoder. Plug the adapter into a power outlet. The red LED indicator should illuminate.
2. Conexión de red: Connect an Ethernet cable from your network router or switch to the "LAN" port (1) on the front panel. The green LED indicator should illuminate, indicating network activity.
3. Conexión de salida de vídeo:
   • For HDMI output: Connect an HDMI cable from the "HDMI OUT" port (5) to your display device (e.g., TV, monitor).
   • For CVBS/BNC output: Connect a BNC cable from the "BNC OUT" port (6) or an AV cable from the "AV OUT" port (4) to your display device.
4. Audio Output (if applicable): If using AV OUT, audio will be carried through the composite cable. For HDMI, audio is embedded in the HDMI signal.
5. RS485 Connection (Optional): If required for control or data transmission, connect your RS485 devices to the RS485 terminal block (7).

Once all connections are made, the device is ready for configuration and operation.

6. Instrucciones de funcionamiento

The HHD-101 decoder is designed to receive and decode various IP video streams. Operation typically involves configuring the decoder via its web interface to receive the desired stream.

6.1. Acceder a la Web Interfaz

1. Ensure the decoder is connected to your network as described in the Setup section.
2. Find the IP address of the decoder. This can often be done using a network scanning tool or by checking your router's connected devices list. The default IP address is typically provided in the separate software utility or quick start guide.
3. Abrir una web navegador en una computadora conectada a la misma red.
4. Enter the decoder's IP address into the browser's address bar and press Enter.
5. Log in using the default username and password (refer to the quick start guide or contact support if unknown).

6.2. Configuring IP Stream Decoding

Dentro de la web interface, you will find options to configure the input stream. The HHD-101 supports multiple protocols:

Figure 6.1: Supported IP Protocols for HHD-101 Decoder.

• Navigate to the "Input Settings" or "Stream Configuration" section.
• Select the desired protocol (e.g., RTMP, RTSP, HLS, UDP).
• Enter the source IP address or URL of the video stream you wish to decode.
• Configure any additional parameters such as port numbers, authentication credentials, or specific stream IDs as required by your source.
• Save the settings. The decoder should begin receiving and outputting the video stream to the connected display.

6.3. Multi-View Descodificación

The HHD-101 supports decoding up to 4 channels for multi-view display. Consult the web interface documentation for specific instructions on configuring multi-view layouts and switching between sources.

6.4. Proprietary Protocol (P-P)

For ultra-low latency point-to-point transmission, the HHD-101 decoder can be used with Haiwei proprietary protocol encoders. This solution is available only when using both HaiweiTech encoders and decoders.

Figure 6.2: Typical System Diagram with HaiweiTech Encoder and Decoder.

7. Mantenimiento

• Limpieza: Utilice un paño suave y seco para limpiar el exterior del dispositivo. No utilice limpiadores líquidos ni aerosoles.
• Ventilación: Ensure the ventilation slots are clear of dust and obstructions to maintain proper airflow.
• Actualizaciones de firmware: Periodically check the HaiweiTech website or contact support for available firmware updates to ensure optimal performance and access to new features.
• Almacenamiento: Si va a almacenar el dispositivo durante un período prolongado, desconéctelo de la alimentación y guárdelo en un lugar fresco y seco.

8. Solución de problemas

9. Especificaciones

10. Garantía y soporte

For warranty information, please refer to the documentation provided at the time of purchase or visit the official HaiweiTech website. For technical support, additional manufacturing services (SDK/API, IP finder/Video management platform/IOS Android APP), solution analysis, or OEM services, please contact HaiweiTech directly. Contact details are typically available on the manufacturer's websitio o a través de su proveedor.

Note: Haiwei proprietary protocol based ultra low latency point to point transmission solution is available with the decoder only. Additional manufacturing Services:SDK/API,IP finder/Video management platform/IOS Android APP,Solution analyze,OEM(more detail:hansen(at)hwsxtec(.)com)