Westclox Tilt & Swivel Digital Alarm Clock Instruction Manual

Introducción

Thank you for choosing the Westclox Tilt & Swivel Digital Alarm Clock. This manual provides detailed instructions for the setup, operation, and maintenance of your new alarm clock. Please read this manual thoroughly before use to ensure proper functionality and to maximize your product experience.

Características principales

• Pantalla digital: Cuenta con una gran pantalla digital LED de 1.8" para una fácil lectura.
• Diseño de inclinación y giro: Unique tilt and swivel stand allows flexible positioning for optimal viewEn.
• Tamaño extra grande: Measures 11" wide x 5" high x 5" deep for ampel espacio de visualización.
• Quiet Alarm: Uses a loud, clear alarm sound.
• Construcción duradera: Made from sturdy ABS plastic with a powder-coated finish.

Image: The Westclox Tilt & Swivel Digital Alarm Clock, highlighting its large display and adjustable stand.

Configuración

Alimentando su reloj

The Westclox Digital Alarm Clock operates primarily via AC power. Connect the provided power adapter to the clock's power input port and then plug it into a standard electrical outlet. The display will illuminate, indicating power is supplied.

Instalación de batería de respaldo

Para energía de respaldo durante nuestratages, install 2 AAA batteries (not included) into the battery compartment located on the bottom of the clock. Ensure correct polarity (+/-) as indicated inside the compartment. The battery backup maintains time and alarm settings but does not power the display.

Configuración de hora inicial

Upon first power-up or after a prolonged power loss without battery backup, the display may show a default time. Refer to the 'Setting the Time' section under Operating Instructions to set the current time.

Instrucciones de funcionamiento

Ajuste de la hora

1. Mantenga pulsado el TIEMPO ESTABLECIDO button (usually located on the back or top of the clock) until the hour digits begin to flash.
2. Presione el HORA button repeatedly to adjust the hour. Pay attention to the PM indicator if using a 12-hour format.
3. Presione el MINUTO Botón repetidamente para ajustar los minutos.
4. Presione el TIEMPO ESTABLECIDO button again to confirm the time and exit time setting mode.

Setting Alarms (AL.1 and AL.2)

This clock features two independent alarms, AL.1 and AL.2.

1. Mantenga pulsado el AL.1 CONJUNTO or AL.2 CONJUNTO Botón hasta que los dígitos de la hora de la alarma comiencen a parpadear.
2. Presione el HORA button to adjust the alarm hour. Observe the PM indicator.
3. Presione el MINUTO para ajustar los minutos de la alarma.
4. Presione el respectivo AL.1 CONJUNTO or AL.2 CONJUNTO Presione nuevamente el botón para confirmar la hora de la alarma.
5. To activate or deactivate an alarm, locate the AL.1 ENCENDIDO/APAGADO or AL.2 ENCENDIDO/APAGADO switch/button. Slide the switch to 'ON' or press the button to toggle the alarm. An indicator light (e.g., AL.1 or AL.2) will appear on the display when the alarm is active.

Función de repetición

Image: The top of the Westclox Digital Alarm Clock showing the prominent snooze/dimmer button.

Cuando suene la alarma, presione el botón grande SNOOZE / DIMMER button located on the top of the clock. The alarm will temporarily pause and sound again after approximately 9 minutes. To turn off the alarm completely, press the corresponding AL.1 ENCENDIDO/APAGADO or AL.2 ENCENDIDO/APAGADO botón/interruptor.

Atenuador de pantalla

El SNOOZE / DIMMER button also controls the brightness of the LED display. Press this button (without an active alarm) to cycle through different brightness levels (e.g., High, Medium, Low, Off). Select the desired brightness for your environment.

Tilt and Swivel Feature

The clock is designed with a unique base that allows the display to be tilted vertically and swiveled horizontally. Gently adjust the clock face to your preferred viewing angle for optimal readability from any position in the room.

Mantenimiento

To ensure the longevity and optimal performance of your Westclox Digital Alarm Clock, follow these simple maintenance guidelines:

• Limpieza: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays, as these may damage the finish or electronic components.
• Colocación: Place the clock on a stable, flat surface. Avoid areas with extreme temperatures, direct sunlight, high humidity, or strong vibrations.
• Reemplazo de batería: Replace the AAA backup batteries annually or when the clock experiences frequent power outages to ensure settings are retained.

Solución de problemas

Presupuesto

Garantía y soporte

For warranty information or technical support, please refer to the packaging or contact Westclox customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.