FRANKE 115.0600.095 Centro Kitchen Faucet Instruction Manual

Introducción

This manual provides detailed instructions for the installation, operation, and maintenance of your FRANKE 115.0600.095 Centro Kitchen Faucet. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product. Keep this manual for future reference.

Información de seguridad

Importante: Always turn off the main water supply before beginning any installation or maintenance work on the faucet. It is recommended that installation be performed by a qualified plumber to ensure compliance with local plumbing codes and safety standards. Use appropriate tools and wear protective gear during installation.

• Asegúrese de que todas las conexiones estén seguras para evitar fugas.
• No apriete demasiado las conexiones, ya que esto puede dañar los componentes.
• Protect the faucet's chrome finish from abrasive materials or harsh chemicals.

Contenido del paquete

Verifique que todos los componentes estén presentes antes de comenzar la instalación:

• FRANKE 115.0600.095 Centro Kitchen Faucet
• Herrajes de montaje
• Mangueras de conexión

Configuración e instalación

The FRANKE 115.0600.095 Centro Kitchen Faucet is designed for deck mounting with a single hole installation. Follow these general steps for installation:

1. Prepare la superficie de montaje: Ensure the sink or countertop has a mounting hole with a diameter of Ø35 mm. The maximum deck thickness should be considered for proper installation.
2. Instalar el grifo: Insert the faucet body into the mounting hole. Secure it from underneath the sink using the provided mounting hardware (washer and nut). Ensure the faucet is oriented correctly before fully tightening.
3. Conectar líneas de agua: Attach the hot and cold water supply lines to the corresponding inlets on the faucet. Connect the other ends to your hot and cold water supply valves. Hand-tighten first, then use a wrench for a quarter turn to ensure a leak-free seal.
4. Compruebe si hay fugas: Once all connections are made, slowly turn on the main water supply. Check all connections for any signs of leaks. If leaks are detected, tighten the connections slightly until the leak stops.

A detailed technical diagram providing all necessary measurements and installation specifications for the faucet. Note the Ø35 mm mounting hole and 150° spout rotation.

Instrucciones de funcionamiento

The FRANKE 115.0600.095 Centro Kitchen Faucet features a single mixer lever positioned at the top for easy control of water flow and temperature. The spout has a fixed position but offers a 150° rotation for convenience.

• Control de flujo de agua y temperatura: Move the lever upwards to increase water flow and downwards to decrease it. Move the lever left for hot water and right for cold water.
• Tecnología de ahorro de agua: This faucet incorporates a two-stage flow reduction system. When opening the lever, it will initially stop at a halfway point, naturally limiting water flow to reduce consumption by up to 50%. For a full flow, simply push the lever further upwards past this resistance point.
• Chorro laminar: The special design of the aerator provides a compact and crystal-clear water stream, significantly reducing splashing during use.
• Rotación del pico: The faucet spout can be rotated up to 150 degrees, allowing for flexible use across different sink bowls or areas.

The faucet is shown installed in a kitchen environment, highlighting its design and functionality in a typical setting.

Esta imagen muestra un detalle view of the faucet's aerator, which produces a compact and splash-reducing laminar water stream.

Mantenimiento y cuidado

To maintain the appearance and functionality of your FRANKE 115.0600.095 Centro Kitchen Faucet, follow these care guidelines:

• Limpieza del acabado: Clean the chrome finish regularly with a soft cloth and mild soap or a non-abrasive cleaner specifically designed for chrome. Rinse thoroughly with clean water and dry with a soft cloth to prevent water spots.
• Evite los productos químicos agresivos: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the chrome finish and internal components.
• Limpieza del aireador: If water flow becomes restricted, the aerator may be clogged with mineral deposits. Unscrew the aerator from the spout, clean it under running water, and remove any debris. Reassemble the aerator securely.

Solución de problemas

Si tiene problemas con su grifo, consulte los siguientes problemas y soluciones comunes:

Presupuesto

• Número de modelo: 115.0600.095
• Tipo: High-pressure mixer faucet
• Finalizar: Cromo
• Cartucho: Ceramic cartridge Ø 35 mm
• Mixer Lever Position: Arriba
• Rotación del pico: 150°
• Diámetro del orificio de montaje: Ø35 mm
• Tipo de pico: Caño fijo
• Material (Mango/Palanca): Cerámico
• Dimensiones del producto: 23.7 x 25.3 x 5 cm (aproximadamente)
• Peso del artículo: 2.33 kilogramos
• Características especiales: Water Saving Technology, Laminar Jet

Garantía y soporte

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Franke website. Contact Franke customer service for assistance with parts, service, or any questions not covered in this manual.