aigo AZ300 Mid Tower Computer Case User Manual

1. Introducción

Thank you for choosing the aigo AZ300 Mid Tower Computer Case. This manual provides detailed instructions for the installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning installation to ensure proper setup and safe use.

Figure 1: aigo AZ300 Mid Tower Computer Case (White)

2. Información de seguridad

• Desconecte siempre la fuente de alimentación del tomacorriente de pared antes de instalar o realizar mantenimiento a cualquier componente dentro del gabinete.
• Manipule los paneles de vidrio templado con cuidado. Son frágiles y pueden romperse si se caen o sufren impactos.
• Avoid placing the case in areas with high humidity, extreme temperatures, or direct sunlight.
• Mantenga las piezas pequeñas y los tornillos fuera del alcance de los niños.
• Asegure una conexión a tierra adecuada para evitar riesgos eléctricos.

3. Producto terminadoview

3.1 Panel de E/S frontal

El panel de E/S frontal proporciona acceso cómodo a los puertos y controles esenciales.

Figura 2: Disposición del panel de E/S frontal

• Puerto Tipo-C: 1x USB Type-C port for modern connectivity.
• Puerto USB 2.0: 1x USB 2.0 port for peripheral connections.
• Puerto USB 3.0: 1x USB 3.0 port for high-speed data transfer.
• HD Audio (Headset/Microphone): Separate jacks for audio output and microphone input.
• Reset/LED Button: Resets the system or controls LED lighting (if applicable).
• Botón de encendido: Enciende o apaga la computadora.

3.2 Internal Layout and Component Compatibility

The aigo AZ300 case offers a spacious interior designed for various component sizes and efficient cooling.

Figure 3: Internal Component and Cooling Layout

• Compatibilidad de la placa base: Supports ATX, Micro-ATX, and ITX motherboards.
• Storage Drive Bays: 2x 2.5" SSD bays and 2x 3.5" HDD bays.
• Longitud de GPU: Maximum GPU length of 400mm.
• Longitud de la fuente de alimentación: Supports standard ATX power supplies up to 200mm.

4. Guía de instalación

4.1 Preparación del caso

1. Coloque el estuche sobre una superficie plana y estable.
2. Carefully remove the tempered glass side panels by unscrewing the thumb screws at each corner. Set the panels aside in a safe place.

Figura 4: Lado trasero View of Case

4.2 Instalación de la placa base

1. Install the I/O shield (if not pre-installed) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or ITX motherboard with the standoffs inside the case. Ensure all standoffs match the motherboard's mounting holes.
3. Asegure la placa base con los tornillos proporcionados.

Figure 5: Motherboard Mounting Areas

4.3 Instalación de la unidad de fuente de alimentación (PSU)

1. Ubique el área de montaje de la fuente de alimentación en la parte inferior trasera de la carcasa.
2. Slide your ATX power supply into the designated slot.
3. Secure the PSU to the case with screws from the rear.

4.4 Instalación de la unidad de almacenamiento

1. Unidades SSD de 2.5": Mount SSDs to the dedicated 2.5" bays, typically located behind the motherboard tray or in specific drive cages.
2. Discos duros de 3.5": Install HDDs into the 3.5" drive cages, usually found at the bottom front of the case.
3. Asegure todas las unidades con los tornillos adecuados.

Figure 6: Rear Internal View with Drive Bays

4.5 Expansion Card (GPU) Installation

1. Retire las cubiertas de las ranuras de expansión necesarias de la parte trasera de la carcasa.
2. Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Asegure las tarjetas con tornillos.

4.6 Instalación del sistema de refrigeración

The aigo AZ300 supports flexible cooling configurations.

• Soporte de los fans: Multiple 120mm fan mounting points are available at the top, front, and rear.
• Soporte del radiador: Supports water coolers with radiators of 360mm, 240mm, and 120mm in designated areas.

4.7 Gestión de cables

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables for improved airflow and aesthetics.

5. Operación

After all components are installed and connected, reattach the tempered glass side panels. Connect your peripherals, monitor, and power cable. Press the power button on the front I/O panel to start your system.

Use the USB ports (Type-C, USB 2.0, USB 3.0) for connecting external devices. The HD Audio jacks are for headphones and microphones.

6. Mantenimiento

El mantenimiento regular ayuda a garantizar un rendimiento óptimo y la longevidad de los componentes de su computadora.

6.1 Limpieza del filtro de polvo

The aigo AZ300 case is equipped with dust filters to prevent dust buildup. Clean these filters periodically.

• Top Magnetic Dust Filter: Gently lift and remove the magnetic dust filter from the top panel. Clean it with compressed air or rinse with water (ensure it's completely dry before reattaching).
• Filtro de polvo de fuente de alimentación: The dust filter for the power supply is located at the bottom of the case. Slide it out for cleaning.

Figure 7: Side Panel and Bottom Dust Filter Location

7. Solución de problemas

• El sistema no se enciende: Ensure all power cables (24-pin ATX, 8-pin CPU, GPU power) are securely connected. Check that the power supply switch is in the 'ON' position. Verify front panel power button connection to the motherboard.
• Sin pantalla: Confirm the monitor is connected to the graphics card (not the motherboard integrated graphics, unless no dedicated GPU is present). Reseat the graphics card and RAM modules.
• Calentamiento excesivo: Ensure all case fans are spinning and oriented correctly for airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler installation.
• Los puertos USB no funcionan: Check that the USB headers from the front panel are correctly connected to the motherboard.

8. Especificaciones

9. Garantía y soporte

aigo strives to provide excellent customer service. If you encounter any quality issues with your aigo AZ300 computer case, please contact us directly. We will assist you with troubleshooting and resolution.

For support, please refer to the contact information provided with your purchase or visit the official aigo websitio.