iMaihom 130W LED Flood Light (Model BDD130D-3) Instruction Manual

Producto terminadoview

The iMaihom 130W LED Flood Light (Model BDD130D-3) is designed for outdoor illumination, featuring a dusk-to-dawn photocell sensor and three adjustable light heads. This unit provides high brightness and is built for durability in various weather conditions.

• Brillo alto: Equipped with 154 high-quality LED chips, producing up to 13000 lumens.
• Funcionalidad del anochecer al amanecer: Built-in sensitive photocell sensor automatically turns the light on at nightfall and off at daybreak.
• Cabezales ajustables: Three light heads can be rotated to different angles, covering a wide lighting area up to 1850 sq. ft.
• Construcción duradera: IP65 waterproof rating and full aluminum body ensure resistance to rain, sleet, snow, and efficient heat dissipation.

¿Qué hay en la caja?

Verifique que todos los componentes estén presentes antes de comenzar la instalación.

• iMaihom 130W LED Flood Light Unit
• Black Silicone Cap (for switch-controlled mode)
• Mounting Hardware (screws, anchors, wire nuts)

Configuración e instalación

This flood light is designed for hardwired installation to a junction box. Ensure power is turned off at the circuit breaker before beginning installation.

Pasos de instalación:

1. Prepare la superficie de montaje: Identify a suitable junction box location on a wall or under eaves/soffits. Ensure the junction box is waterproof for outdoor use.
2. Coloque la placa de montaje: Fije la placa de montaje a la caja de conexiones utilizando los tornillos provistos.
3. Conexiones de cable: Connect the flood light's wires to your household wiring:
   • Black wire (Live) to Black wire
   • Cable blanco (neutro) a cable blanco
   • Green/Yellow wire (Ground) to Green/Ground wire
   Utilice las tuercas para cables proporcionadas para asegurar las conexiones.
4. Monte la luminaria: Align the flood light fixture with the mounting plate and secure it with the central screw.
5. Sella el accesorio: Ensure the gasket is properly seated to maintain the IP65 waterproof rating.
6. Ajuste de los cabezales de luz: Loosen the screws on the side of each light head to adjust their angle as needed. Tighten screws to secure the position.
7. Restaurar energía: Encienda la energía en el disyuntor.

Figure 1: Hardwired Installation Steps. Shows the three steps for connecting the light to a junction box.

Figure 2: Eave and Wall Installation Examples. Demonstrates the versatility of mounting options.

Figure 3: Adjustable Heads and Photocell. Illustrates the rotational capability of the light heads and the location of the photocell.

Modos de funcionamiento

The iMaihom 130W LED Flood Light offers two operating modes:

1. Dusk-to-Dawn Mode (Default)

In this mode, the built-in photocell sensor automatically detects ambient light levels. The light will turn on when it gets dark (nightfall) and turn off when it gets bright (daybreak).

• No manual intervention required.
• Energy efficient operation.

Figure 4: Dusk-to-Dawn Operation. The light automatically activates at dusk and deactivates at dawn.

2. Switch-Controlled Mode

To operate the light manually via a wall switch, cover the photocell sensor with the provided black silicone cap. This disables the automatic dusk-to-dawn function, allowing you to control the light with your existing wall switch.

• Allows manual ON/OFF control.
• Ideal for situations where continuous lighting is not desired or specific timing is needed.

Figure 5: Switching to Manual Control. Instructions for using the black silicone cap to enable switch-controlled operation.

Mantenimiento

The iMaihom 130W LED Flood Light requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:

• Limpieza: Periodically clean the light heads and photocell sensor with a soft, damp Paño para eliminar la suciedad, el polvo o los residuos. No utilice limpiadores abrasivos ni disolventes.
• Inspección: Inspeccione periódicamente el cableado y el montaje para detectar signos de desgaste, daños o conexiones sueltas. Solucione cualquier problema de inmediato.
• Obstrucción de la fotocélula: Ensure the photocell sensor is not obstructed by leaves, dirt, or other objects, as this can interfere with its automatic operation.

Solución de problemas

Presupuesto

Garantía y soporte

The iMaihom 130W LED Flood Light (Model BDD130D-3) comes with a 2 año de garantía from the manufacturer. For technical support, warranty claims, or further assistance, please contact iMaihom customer service through their official websitio o el minorista donde se compró el producto.

For more information about iMaihom products, visit the iMaihom Store on Amazon.

Vídeos de productos