1. Introducción
This manual provides detailed instructions for the ANBERNIC RG351MP Handheld Game Console. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your gaming experience. Keep this manual for future reference.
2. Información de seguridad
- No exponga el dispositivo a temperaturas extremas, luz solar directa o humedad alta.
- Evite dejar caer o someter el dispositivo a impactos fuertes.
- Mantenga el dispositivo alejado del agua y otros líquidos.
- No intente desmontar ni reparar el dispositivo usted mismo. Para obtener ayuda, contacte con el personal de servicio técnico autorizado.
- Utilice únicamente el cable de carga y el adaptador proporcionados.
- Asegúrese de que haya una ventilación adecuada durante el uso y la carga.
- This product contains a Lithium Polymer battery. Dispose of batteries responsibly according to local regulations.
3. Contenido del paquete
Verifique que todos los artículos estén presentes en el paquete:
- 1 x RG351MP Game Console
- 1 x WIFI Module
- 1 tarjeta SD de 64 GB
- 1 x cable de carga USB
- 1 x Manual de usuario
- 1 x protector de pantalla
- 1 x Wipes
4. Producto terminadoview
Familiarize yourself with the various components and controls of your ANBERNIC RG351MP console.
Figura 4.1: Frente View. This image displays the front of the ANBERNIC RG351MP console, featuring the 3.5-inch IPS screen, D-pad, action buttons (X, Y, A, B), SELECT and START buttons, and dual analog joysticks.
Figure 4.2: Console Layout. This image provides various angles of the console, highlighting the L1/L2/R1/R2 shoulder buttons, OTG and DC ports on the top, volume controls on the side, and TF/EXT, Reset, and TF2/EXT slots on the bottom.
Figura 4.3: Atrás View. The rear of the console is shown, displaying the ANBERNIC logo, model number RG351MP, and regulatory markings. This view also indicates the location of the internal Li-Po battery.
Figure 4.4: Screen Display. This image emphasizes the console's 3.5-inch IPS screen with OCA full lamination and 640x480 resolution, providing a clear visual experience.
5. Configuración
5.1 Carga del dispositivo
Before initial use, fully charge the console. Connect the provided USB charging cable to the DC port on the top of the console and the other end to a compatible USB power adapter (maximum load 2A). A full charge typically takes approximately 4 hours.
5.2 Inserción de la tarjeta TF
The console supports dual TF card slots. The primary TF1/EXT slot is for the operating system and pre-installed games. The TF2/EXT slot can be used to expand storage up to 256GB for additional games.
- Localice la ranura TF1/EXT en la parte inferior de la consola.
- Gently insert the pre-installed 64GB TF card into the slot until it clicks into place.
- If using an additional TF card for games, insert it into the TF2/EXT slot.
Figure 5.1: TF Card Insertion. This image illustrates the process of inserting a TF card into the console's expansion slot, demonstrating how to properly seat the card.
5.3 Encendido / Apagado
- Para encender: Press and hold the Power button (located on the side) for a few seconds until the screen illuminates.
- Para apagar: Press and hold the Power button until the power-off menu appears, then select "Shutdown" or "Power Off". Alternatively, a quick press of the Power button may put the device into sleep mode, depending on system settings.
5.4 Connecting the WIFI Module
The console supports an external WIFI module for network connectivity. Insert the provided WIFI module into one of the OTG USB ports (located on the top of the console). Once connected, you can configure network settings within the system menu.
6. Instrucciones de funcionamiento
6.1 Navegación básica
- D-pad / Analog Joysticks: Use these to navigate through menus and control in-game characters.
- Un botón: Confirm selection or perform primary action.
- Botón B: Go back or perform secondary action.
- X / Y Buttons: Perform specific in-game actions as defined by the game.
- Botón de inicio: Pause game, open in-game menus, or confirm selections.
- Botón SELECCIONAR: Access system menus or perform specific in-game functions.
- Botones L1/L2/R1/R2: Shoulder buttons for various in-game controls.
6.2 Game Selection and Launching
From the main menu, navigate to the desired game system (e.g., PS1, GBA, NES). Select a game from the list using the D-pad or analog stick and press the A button to launch it.
6.3 Guardar y cargar estados del juego
Most emulators support "save states" which allow you to save your progress at any point in a game, independent of the game's internal save system. Refer to the specific emulator's hotkey combinations (often a combination of SELECT + L1/R1 or similar) for saving and loading states.
6.4 Configuración del sistema
Access the system settings menu (usually via the SELECT button or a dedicated menu option) to adjust:
- Idioma: Cambiar el idioma del sistema.
- Mostrar: Adjust screen brightness, aspect ratio, and video filters.
- Sonido: Control volume levels and audio output.
- Red: Configure Wi-Fi settings (requires external Wi-Fi module).
- Configuración del controlador: Map buttons or calibrate joysticks.
6.5 Adding New Games
To add new games, you will need to transfer game ROMs to the TF2/EXT card. Ensure the ROMs are in a format supported by the console's emulators. Connect the TF2/EXT card to a computer using a card reader and copy the game files to the appropriate system folders on the card. After reinserting the card into the console, refresh the game list in the system menu.
7. Mantenimiento
7.1 Limpieza del dispositivo
Use a soft, dry, lint-free cloth to clean the console's exterior. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Do not use abrasive cleaners or solvents.
7.2 Cuidado de la batería
- Evite descargar completamente la batería con frecuencia.
- Guarde el dispositivo en un lugar fresco y seco cuando no lo utilice durante períodos prolongados.
- Si el dispositivo no se utilizará durante un tiempo prolongado, cárguelo al 50 % aproximadamente antes de guardarlo.
7.3 Actualizaciones de software
Periodically check the official ANBERNIC website or community forums for firmware updates. Updates can improve performance, add features, or fix bugs. Follow the provided instructions carefully when performing any software updates.
8. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| El dispositivo no se enciende. | Low battery; TF card not properly inserted; System crash. | Charge the device for at least 30 minutes. Ensure TF1/EXT card is correctly inserted. Press the Reset button (located on the bottom of the console) with a thin object. |
| Los juegos no se cargan o fallan. | Corrupt game file; Incorrect emulator settings; TF card issue. | Verificar juego file integrity. Check emulator settings (e.g., core, video driver). Reinsert or try a different TF card. |
| La pantalla está en blanco o parpadea. | Software issue; Hardware malfunction. | Reinicie el dispositivo. Si el problema persiste, contacte con atención al cliente. |
| No hay sonido. | Volume too low; Muted; Headphone jack issue. | Increase volume using the side buttons. Check system sound settings. Ensure no headphones are partially inserted. |
9. Especificaciones
| Característica | Detalle |
|---|---|
| Modelo | RG351MP |
| Material | Aluminum alloy shell, CNC process |
| Pantalla | Pantalla IPS de 3.5 pulgadas, laminación completa OCA, resolución de 640*480 |
| UPC | RK3326 de cuatro núcleos a 1.5 GHz |
| GPU | Mali-G31 MP2 |
| RAM | DDR3L 1 GB |
| Memoria interna | 16GB (for system) |
| Sistema | Sistema Linux de código abierto |
| Game Support | Vibrating motor, supports 20+ game formats. Users can download relevant game formats. |
| Vocero | Altavoz estéreo de doble bocina de alta calidad |
| Batería | Li-polymer 3500 mAh, lasting approximately 6 hours |
| Cargando | 1.3A charging, matching maximum load 2A, USB charging cable, 4 hours for full charge |
| Soporte para tarjeta TF | Supports TF card max to 256GB (dual TF card slots) |
| Otras funciones | Support external network card WIFI, Double OTG, Double 3D rocker, Support 3.5mm stereo earphones. |
| Dimensiones | 6.6 x 3.8 x 1.9 pulgadas (Dimensiones del paquete) |
| Peso del artículo | 15.2 onzas |
10. Garantía y soporte
10.1 Información de garantía
ANBERNIC products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official ANBERNIC webConsulte el sitio web para conocer los términos y condiciones detallados de la garantía. Conserve su comprobante de compra para reclamar la garantía.
10.2 Atención al cliente
If you encounter any issues or have questions not covered in this manual, please contact ANBERNIC customer support. You can usually find contact information on the official ANBERNIC websitio o a través del minorista donde compró el producto.