QiCYCLE P1 Portable Air Compressor User Manual

1. Introducción

The QiCYCLE P1 is a high-performance wireless portable air compressor designed for quick and efficient inflation of various items. Equipped with a 120W high-efficiency motor, it can reach a maximum inflation pressure of 150 PSI (10.3 bar) with an airflow of up to 32L/min. This device features a built-in 7800mAh Li-ion battery, an automatic stop function, and can also serve as a 5000mAh power bank and an emergency LED flashlight. Its robust construction ensures durability and safety.

2. Información de seguridad

• Lea atentamente todas las instrucciones antes de usar.
• Mantener fuera del alcance de los niños.
• No opere el compresor en condiciones húmedas o cerca de líquidos o gases inflamables.
• Asegúrese de que la manguera de aire esté bien conectada antes de comenzar a inflar.
• No infle demasiado los artículos. Consulte siempre la presión recomendada por el fabricante.
• Evite el uso continuo prolongado para evitar el sobrecalentamiento. Deje que el dispositivo se enfríe si se calienta.
• Utilice únicamente el cable de carga y los adaptadores proporcionados.
• No desmonte ni intente reparar el dispositivo usted mismo. Póngase en contacto con el servicio de atención al cliente para obtener ayuda.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en el paquete:

• 1 x QiCYCLE P1 Tire Inflator
• 1 x Air Tube (with Schrader valve)
• 1 adaptador de válvula Presta.
• 1 x Adaptador de aguja de bola
• Cable de carga 1 x USB-C
• 1 x bolsa de almacenamiento
• 1 x Manual de usuario

Image: Contents of the QiCYCLE P1 package, including the inflator, air tube, various adapters, USB-C cable, storage bag, and user manual.

4. Producto terminadoview

Características principales:

• Inflación rápida: 120W motor, up to 150 PSI / 10.3 bar, 32L/min airflow. Inflates a 205/55 R16 tire from 0 to 2.5 bar in approximately 5 minutes and 52 seconds.
• Batería de alta capacidad: Integrated 7800mAh (3x2600mAh) Li-ion battery for extended use. Fully charges in about 3 hours via USB-C.
• 5 Preset Modes & Automatic Stop: Includes modes for Car, Motorcycle, Bicycle, Ball, and a Manual mode. Automatically stops when the preset pressure is reached to prevent over-inflation.
• LCD Display & Real-time Monitoring: High-definition LCD shows real-time tire pressure data. Supports auto-calibration at high altitudes.
• Dispositivo multifuncional: Functions as a 5000mAh power bank (5V/2A USB-A output) and an emergency LED flashlight (long-duration light and SOS flashing).
• Construcción duradera: Features zinc alloy cast cylinders, heat-resistant PC shell, and a 350mm vulcanized rubber hose for enhanced durability and safety.

Imagen: interna view of the QiCYCLE P1, highlighting the dual integrated chips for precise control and heat dissipation.

5. Configuración

5.1 Carga del dispositivo

1. Connect the provided USB-C charging cable to the charging port on the QiCYCLE P1.
2. Connect the other end of the USB-C cable to a compatible USB power adapter (not included) or a power source.
3. The battery indicator on the LCD screen will show the charging status. A full charge typically takes about 3 hours.
4. Se recomienda cargar completamente el dispositivo antes del primer uso.

5.2 Conexión de la manguera de aire y los adaptadores

1. Screw the air tube securely onto the inflation port at the top of the compressor.
2. For Schrader valves (common on cars, motorcycles, and some bicycles), the air tube can be directly connected.
3. For Presta valves (common on road bikes), screw the Presta valve adapter onto the Presta valve, then attach the air tube to the adapter.
4. For balls, screw the ball needle adapter onto the air tube, then insert the needle into the ball's valve.

6. Instrucciones de funcionamiento

6.1 Encendido / Apagado

• Para encender: Mantenga presionado el botón de encendido (U) durante 2 segundos.
• Para apagar: Mantenga presionado el botón de encendido (U) for 2 seconds. The device will also automatically power off after a period of inactivity.

6.2 Selección del modo de inflado

The QiCYCLE P1 offers 5 preset inflation modes:

1. With the device powered on, press the mode button (M) to cycle through the available modes: Car, Motorcycle, Bicycle, Ball, and Manual.
2. Each mode has a default pressure range. The manual mode allows for custom pressure settings from 3-150 PSI.

Image: Display showing the 5 preset inflation modes: Car (1.8-3.5 bar), Motorcycle (1.8-3.0 bar), Bicycle (30-145 PSI), Ball (4-16 PSI), and Manual (3-150 PSI).

6.3 Ajuste de la presión objetivo

• After selecting a mode, use the '+' and '-' buttons to adjust the target pressure.
• Press the 'U' button briefly to switch between pressure units (PSI, BAR, KPA).
• In Manual mode, the device remembers your last set pressure.

6.4 Inicio y detención de la inflación

1. Remove the valve cap and securely connect the air tube to the item's valve.
2. Select the desired mode and set the target pressure.
3. Presiona el boton de poder (U) to start inflation. The real-time pressure will be displayed.
4. El compresor se detendrá automáticamente una vez que se alcance la presión objetivo.
5. Para detener el inflado manualmente, presione el botón de encendido (U) de nuevo.
6. Desconecte con cuidado el tubo de aire de la válvula.

Image: Step-by-step guide for inflation: 1) Remove valve cap and connect, 2) Select mode and set pressure, 3) Press power button to start inflation.

6.5 Función de banco de energía

• The QiCYCLE P1 can act as a 5000mAh power bank.
• Connect your mobile device or other USB-powered gadget to the USB-A output port (5V/2A) on the compressor using a compatible USB cable.
• The device will begin charging your external device.

Image: The QiCYCLE P1 being used as a power bank to charge a smartphone via its USB-A output port.

6.6 Función de linterna LED

• Press the flashlight button (light bulb icon) to turn on the LED light.
• Press again to cycle through different light modes (e.g., steady light, SOS flashing).
• Presione una tercera vez para apagar la luz LED.

7. Mantenimiento

• Cuidado de la batería: If the device is not used for an extended period, it is recommended to recharge the battery every six months to maintain its performance and prolong its lifespan.
• Limpieza: Limpie el exterior del compresor con un paño suave y seco. No utilice productos químicos agresivos ni limpiadores abrasivos.
• Almacenamiento: Store the compressor in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage bag to protect it from dust and damage.
• Inspección de manguera: Inspeccione periódicamente la manguera de aire para detectar signos de desgaste, grietas o daños. Reemplácela si es necesario.

8. Solución de problemas

9. Especificaciones

10. Garantía y soporte

10.1 Información de garantía

QiCYCLE products come with a 12-month worry-free warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

10.2 Atención al cliente

For any questions, suggestions, or technical assistance, please do not hesitate to contact our customer service team. We offer 7x24 hour pre-sales and after-sales support.

Información del contacto:

• Correo electrónico: support@qicycle.com
• Teléfono: +86 199 2515 4063