1. Información de seguridad
Lea atentamente todas las instrucciones de seguridad antes de instalar y utilizar el producto. El incumplimiento de estas instrucciones podría provocar descargas eléctricas, incendios u otras lesiones.
- Apague la energía: Desconecte siempre la alimentación del disyuntor o de la caja de fusibles antes de instalar, realizar mantenimiento o quitar el interruptor.
- Electricista calificado: La instalación debe ser realizada por un electricista calificado de acuerdo con todos los códigos eléctricos locales y nacionales.
- Volumentage: Asegúrese de que el volumen de funcionamientotage of your electrical system matches the switch's specifications (250V).
- Alambrado: Verify all wire connections are secure and correctly identified (Live, Neutral, Load).
- Ambiente: No instale en mojado o damp locations. This product is rated IP65 for protection against dust and low-pressure water jets, but it is not submersible.
- Niños: Mantenga los materiales de embalaje y las piezas pequeñas fuera del alcance de los niños.
2. Producto terminadoview
The CNBINGO Double Rocker Switch (Model M1-P105) is designed for controlling lighting circuits from one or two locations. It features a modern crystal glass panel and phosphorescent dots for visibility in low light.
2.1 Componentes
Imagen: Explotó view showing the luxury crystal glass panel, integrated security module, and metal frame of the switch.
- Luxury Crystal Glass Panel: Provides a modern aesthetic and is easy to clean.
- Integrated Security Module: Houses the electrical components and ensures safe operation.
- Marco de metal: Provides structural support and facilitates secure mounting.
2.2 Características principales
- Phosphorescent Dots: Three green dots on each rocker glow faintly in the dark after absorbing light, aiding visibility without disturbing sleep.
- Control bidireccional: Can be used as a two-way switch or a 1-pole ON/OFF switch to control lights from one or two locations.
- Construcción duradera: Features a fire-protective PC plate, glass panel, and modular housing. Internal components use fluorescent copper and metal for extended lifespan (up to 25 years).
- Tamaño estándar: Designed to fit standard 86 x 86mm flush-mounted boxes with a 21mm mounting depth.
3. Especificaciones
| Marca | CNBINGO |
| Número de modelo | M1-P105 |
| Dimensiones del producto (L x An x Al) | 8.6 x 8.6 x 3 cm |
| Peso del artículo | 180 gramos |
| Modo de funcionamiento | ENCENDIDO APAGADO |
| Calificación actual | 10 A |
| Vol de funcionamientotage | 250 voltios |
| Tipo de contacto | Normalmente cerrado |
| Tipo de conector | Tornillo |
| Tipo de interruptor | Balancín |
| Terminal | Tornillo |
| Material | Policarbonato |
| Tipo de circuito | 2 vías |
| Tipo de montaje | Montaje en interiores |
| Tipo de actuador | Botón pulsador |
| Número de posiciones | 2 |
| Método de control | Botón pulsador |
| Protocolo de conectividad | Wi-Fi, RF433 (Note: This specific model M1-P105 is a mechanical rocker switch, not Wi-Fi/RF433 enabled. This specification might refer to other CNBINGO products.) |
| Color | Blanco |
| Material de contacto | Cobre |
| Calificación de protección internacional | IP65 |
4. Instalación
4.1 antes de la instalación
- Ensure the power supply to the circuit is completely OFF at the main breaker.
- Confirm you have all necessary tools (screwdriver, wire strippers, voltagy probador).
- Verify the existing wall box is suitable for the switch dimensions.
4.2 Dimensiones de montaje
Imagen: Standard dimensions of the switch, indicating it fits standard flush-mounted boxes (86x86mm with 21mm mounting depth).
The switch is designed for standard flush-mounted boxes. The front panel measures 86mm x 86mm, and the module requires a mounting depth of 21mm.
4.3 Diagrama de cableado
Imagen: Wiring diagram illustrating connections for a double rocker switch in both 1-way and 2-way configurations. Blue indicates Neutral, Red indicates Live, and Black indicates Load wires to the lights.
The switch supports both 1-way (single location control) and 2-way (multiple location control) wiring. Refer to the diagram for correct connections.
- Cable vivo (L): Connect the incoming live wire to the 'L' terminal.
- Load Wires (L1, L2): Connect the load wires going to your light fixtures to the 'L1' and 'L2' terminals for each respective switch.
- Two-Way Wiring (L1, L2, L3): For 2-way control, connect the common live wire to 'L' and the two traveler wires between the switches to 'L1' and 'L2' (or 'L1' and 'L3' depending on the specific terminal layout). Consult a qualified electrician if unsure.
Imagen: Trasero view of the switch, detailing the screw terminals for electrical connections.
4.4 pasos de instalación
- Apagado: Asegúrese de que la fuente de alimentación principal esté apagada.
- Quitar el interruptor antiguo: Retire con cuidado el interruptor existente de la caja de pared.
- Conexiones de cable: Connect the wires to the appropriate terminals on the CNBINGO switch as per the wiring diagram. Ensure all connections are tight.
- Interruptor de montaje: Gently push the switch module into the wall box. Secure it using the provided screws.
- Fijar el panel de vidrio: Snap the crystal glass panel onto the switch module. The design is screwless for a clean finish.
- Restaurar energía: Vuelva a encender la fuente de alimentación principal.
- Prueba: Test the functionality of the switch.
5. Instrucciones de funcionamiento
5.1 Funcionamiento básico
To operate the switch, simply press the top or bottom of the rocker panel to toggle the connected light fixture ON or OFF. Each rocker controls an independent circuit.
Imagen: The CNBINGO Double Rocker Switch seamlessly integrated into various room settings, highlighting its modern design and ease of use.
5.2 Fluorescent Dots
The three green dots on each rocker are phosphorescent. They absorb ambient light during the day and glow faintly in the dark, making the switch visible at night without being overly bright or disruptive to sleep.
Imagen: Lado profesionalfile of the switch, showcasing the elegant crystal glass panel and the subtle phosphorescent dots.
5.3 Control bidireccional
If wired for two-way control, the switch can be used in conjunction with another two-way switch to control a single light fixture from two different locations (e.g., at the top and bottom of a staircase).
6. Mantenimiento
- Limpieza: The crystal glass panel can be cleaned with a soft, damp paño. Evite limpiadores abrasivos o productos químicos agresivos que puedan dañar el acabado.
- Inspección: Periodically inspect the switch for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
- No hay piezas que el usuario pueda reparar: Do not attempt to disassemble the switch module. There are no user-serviceable parts inside.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no se enciende ni se apaga. | No power to the switch; Loose wiring connection; Faulty light bulb; Incorrect wiring. | Check circuit breaker; Ensure all wires are securely connected; Replace light bulb; Verify wiring against diagram, consult electrician if needed. |
| Switch feels loose in the wall. | Los tornillos de montaje no están bien apretados. | Turn off power, then tighten mounting screws. |
| Phosphorescent dots do not glow. | Exposición insuficiente a la luz. | Ensure the switch is exposed to ambient light during the day to charge the phosphorescent material. |
| El interruptor emite un zumbido. | Loose connection; Incompatible load (rare for mechanical switches). | Turn off power and check all wiring connections. If the issue persists, consult a qualified electrician. |
8. Garantía y soporte
CNBINGO switches are manufactured with high-quality materials and are designed for a long operational life, up to 25 years under normal use conditions.
For technical support or warranty inquiries, please contact your retailer or visit the official CNBINGO website. Please have your model number (M1-P105) and purchase details ready.