Introducción
The Keychron K6 Pro is a 65% layout wireless custom mechanical keyboard designed for enhanced typing experience and versatility. It features QMK/VIA programmability, hot-swappable switches, and supports both Bluetooth 5.1 wireless and USB-C wired connections. This keyboard is compatible with macOS, Windows, and Linux operating systems.
Contenido del paquete
Please verify that all items are present in your Keychron K6 Pro package:
- 1x teclado completamente ensamblado
- 1x cable tipo A a tipo C
- 1x Mac and Windows Keycaps Set
- 1x extractor de teclas
- 1 extractor de interruptor.
- 1x llave hexagonal
- 1x Screwdriver (located at the bottom of the box)
Configuración
1. Conexión del teclado
The K6 Pro supports both wireless Bluetooth 5.1 and wired USB-C connections.
Conexión Bluetooth:
- Ensure the keyboard's mode switch (located on the side) is set to 'Bluetooth'.
- On your device (laptop, phone, tablet), enable Bluetooth and search for 'Keychron K6 Pro'.
- Select the keyboard to pair. The keyboard can connect to up to 3 devices simultaneously. Switch between paired devices using Fn1 + Q, Fn1 + W, or Fn1 + E.
Conexión por cable:
- Ensure the keyboard's mode switch is set to 'Cable'.
- Conecte el teclado a su computadora usando el cable USB-C provisto.
2. Cambio de sistema operativo
The K6 Pro has a dedicated switch to toggle between macOS and Windows layouts. Locate the switch on the side of the keyboard and set it to your desired operating system for optimal key functionality.
3. Carga del teclado
Connect the USB-C cable to the keyboard and a power source (e.g., computer USB port, wall adapter). The keyboard features a rechargeable battery. An indicator light will show charging status.
Operación
1. Key Combinations (Fn Keys)
The K6 Pro utilizes Fn (Function) key combinations to access various features and multimedia controls. Refer to the tables below for common combinations:
Fn1 + Keys:
Fn2 + Keys:
2. QMK/VIA Customization
The K6 Pro is fully programmable with QMK/VIA firmware. This allows you to remap any key, create macro commands, and customize lighting effects. To use QMK/VIA:
- Conecte el teclado a su computadora mediante el cable USB-C.
- Download and install the VIA software or access the VIA web solicitud.
- Follow the on-screen instructions to customize your keymap and macros. Note: Key remapping is performed in wired mode, but the changes apply to both wired and wireless modes.
3. Conmutadores intercambiables en caliente
El K6 Pro cuenta con conectores intercambiables en caliente, lo que permite cambiar los interruptores mecánicos sin necesidad de soldadura. Es compatible con la mayoría de los interruptores mecánicos MX de 3 y 5 pines.
- To remove a switch, use the provided switch puller to gently grip and pull the switch upwards.
- To install a new switch, align the pins of the new switch with the holes on the PCB and press down firmly until it clicks into place. Ensure pins are not bent.
4. Control de retroiluminación RGB
The keyboard features RGB backlighting. Use Fn1 + Light effect key to cycle through different backlight effects. Use Fn2 + Left/Right arrow keys to change backlight colors.
Mantenimiento
1. Limpieza del teclado
Para limpiar el teclado, primero desconéctelo de todas las fuentes de alimentación. Utilice un paño suave y sin pelusa ligeramente seco.ampened with water or a mild cleaning solution. For deeper cleaning, remove keycaps using the provided keycap puller and use compressed air to clear debris from between switches.
2. Reemplazo de interruptores y teclas
As the K6 Pro is hot-swappable, you can easily replace individual switches or keycaps. Use the provided tools for safe removal and installation. Ensure proper alignment to avoid damaging pins or sockets.
Solución de problemas
- El teclado no se conecta mediante Bluetooth: Ensure the keyboard is in Bluetooth mode and discoverable. Remove previous pairings from your device and try pairing again. Ensure the keyboard is charged.
- Las teclas no responden: Check if the keyboard is in the correct operating system mode (Mac/Windows). If using wired mode, ensure the cable is securely connected. If a specific key is not working, consider hot-swapping the switch for a new one.
- Problemas de retroiluminación: Use the Fn key combinations to adjust brightness or cycle through effects. Ensure the keyboard is not in a low-power state.
- QMK/VIA not detecting keyboard: Ensure the keyboard is connected via USB-C cable and the mode switch is set to 'Cable'. Restart the VIA software or web solicitud.
Presupuesto
| Marca | Clavechrono |
| Nombre del modelo | Keycron K6 Pro |
| Número de modelo | K6P-H1 |
| Tecnología de conectividad | Bluetooth 5.1, USB-C |
| Disposición del teclado | 65% (68 keys), QWERTY |
| Mechanical Switch Model | Keychron K Pro Red (Linear) |
| Intercambiables en caliente | Yes (3-pin and 5-pin MX mechanical switches) |
| Contraluz | RGB |
| Programabilidad | QMK/VIA enabled |
| Sistemas operativos compatibles | mac OS, Windows, Linux |
| Fuente de poder | Batería recargable |
| Material | Plastic enclosure, Steel plate |
| Características adicionales | PCB-mounted screw-in stabilizers, Sound-absorbing foam, Silicone dampening bottom pad, Double-shot PBT Keycaps |
Garantía
The Keychron K6 Pro comes with a 1-year limited warranty. Please retain your proof of purchase for warranty claims. For detailed warranty terms and conditions, refer to the official Keychron websitio o póngase en contacto con el servicio de atención al cliente.
Apoyo
For further assistance, technical support, or to download the latest firmware and VIA software, please visit the official Keychron webSitio. También puede encontrar preguntas frecuentes y foros de la comunidad para obtener ayuda adicional.