AQUAPHOR 507880
AQUAPHOR City Filtered Water Bottle User Manual
Modelo: 507880
This manual provides essential instructions for the safe and effective use, maintenance, and care of your AQUAPHOR City Filtered Water Bottle.
1. Producto terminadoview
The AQUAPHOR City Filtered Water Bottle is a portable hydration solution designed for daily use. It features an integrated activated carbon filter to improve water quality by reducing chlorine and other impurities. Constructed from durable Tritan material, the bottle is BPA-free, lightweight, and designed to be leak-proof.

Imagen 1.1: Másview of the AQUAPHOR City Filtered Water Bottle, emphasizing its filtration, leak-proof design, durable Tritan material, and BPA-free composition.
The integrated filter is designed to provide fresh-tasting water by reducing substances that affect taste and odor. Each filter has a capacity of approximately 150 liters.

Image 1.2: Illustration detailing the filtration benefits, including chlorine reduction and improved water taste.
2. Componentes
Your AQUAPHOR City Filtered Water Bottle package includes the following components:
- Water Bottle (Tritan, 500 ml / 16.9 oz capacity)
- Integrated Filter Cartridge
- Lid with drinking spout and carrying strap

Imagen 2.1: Desmontado view of the bottle components, including the filter and lid.
3. Configuración y primer uso
3.1 Limpieza inicial
- Before first use, disassemble all components: bottle, filter, and lid.
- Wash the bottle and lid thoroughly with warm water and mild soap. Rinse completely.
- No lave el filtro con jabón. Rinse the filter under cold running water for 1-2 minutes to remove any loose carbon particles.
- Allow all parts to air dry completely before assembly.
3.2 Instalación del filtro
- Ensure the filter is rinsed as described in Section 3.1.
- Insert the filter cartridge firmly into the designated slot within the lid assembly. Ensure it is securely seated to prevent dislodging during use.
- Screw the lid onto the bottle, ensuring a tight seal.

Image 3.1: Detail of the activated carbon filter within the lid.
4. Operación
4.1 Llenado de la botella
- Desenrosque la tapa de la botella.
- Fill the bottle with tap water up to the maximum fill line (500 ml / 16.9 oz).
- Enrosque firmemente la tapa nuevamente en la botella.
4.2 Drinking with the Filter
- To open the drinking spout, press the release button on the lid. The lid will flip open.
- Sip water through the spout. The water will pass through the activated carbon filter as you drink.
- After drinking, close the lid firmly until it clicks to ensure a leak-proof seal.

Image 4.1: The leak-proof lid mechanism.
5. Mantenimiento y cuidado
5.1 Cleaning the Bottle and Lid
- The bottle and lid are lavar únicamente a manoNo los coloque en el lavavajillas.
- Lavar con agua tibia y jabón y enjuagar bien.
- Ensure all parts are completely dry before reassembling or storing to prevent odor or mold growth.
5.2 Reemplazo del filtro
- The filter should be replaced after approximately 150 liters of water or every 1-2 months, whichever comes first, to maintain optimal filtration performance.
- To replace, unscrew the lid and carefully remove the old filter cartridge.
- Prepare the new filter by rinsing it under cold running water for 1-2 minutes.
- Insert the new filter firmly into the lid assembly until it is securely seated.
- Dispose of the old filter responsibly according to local regulations.
5.3 Almacenamiento
- When not in use for an extended period, ensure the bottle and filter are clean and completely dry.
- Guarde la botella con la tapa ligeramente entreabierta para permitir la circulación del aire.
6. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Water is difficult to sip through the filter. | Filter may be clogged or nearing the end of its lifespan. | Rinse the filter thoroughly. If the issue persists, replace the filter cartridge. |
| Filter falls out of the lid. | Filter not securely installed in the lid. | Ensure the filter is pressed firmly into its designated slot in the lid until it clicks into place. |
| La botella tiene fugas. | Lid not properly closed or sealed. | Ensure the lid is screwed on tightly and the drinking spout is fully closed until it clicks. Check that the silicone seal is correctly positioned. |
| Sabor u olor desagradable en el agua. | Filter needs replacement or bottle needs cleaning. | Replace the filter cartridge. Thoroughly clean the bottle and lid as per Section 5.1. |
7. Especificaciones
- Nombre del modelo: AQUAPHOR CITY BOTTLE
- Número de modelo: 507880
- Capacidad: 500 ml (16.9 onzas)
- Material: Tritan (BPA-free Plastic)
- Dimensiones del producto: 2.6" de ancho x 9.1" de alto
- Peso del artículo: 7 onzas
- Tipo de filtro: Carbón activado
- Vida útil del filtro: Approximately 150 liters or 1-2 months
- Instrucciones de cuidado: Lavar a mano únicamente
8. Garantía y soporte
For any questions, concerns, or support regarding your AQUAPHOR City Filtered Water Bottle, please refer to the product packaging for warranty details or contact AQUAPHOR customer service directly. Contact information can typically be found on the manufacturer's official websitio o en la página minorista del producto.
Always ensure you are using genuine AQUAPHOR replacement filters to maintain product performance and validity of any applicable warranty.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.