1. Información de seguridad
Read all instructions thoroughly before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death. This appliance must be installed by a qualified electrician and plumber in accordance with all national and local electrical and plumbing codes.
- Peligro eléctrico: Ensure power is disconnected at the circuit breaker before performing any installation or maintenance.
- Presión del agua: Do not operate the unit if water pressure is below the minimum required.
- Configuraciones de temperatura: Be aware of potential scalding hazards if the temperature is set too high.
- Toma de tierra: Este aparato debe estar correctamente conectado a tierra.
2. Producto terminadoview
The ANZZI Envo Electric Tankless Water Heater provides on-demand hot water without the need for a storage tank. Its compact design allows for installation in various locations, saving space and reducing standby heat loss. This unit is designed for continuous hot water supply to multiple fixtures.
Características principales:
- Heats water only when needed, eliminating standby heat loss.
- Compact design for installation in tight spaces.
- Supplies hot water to kitchen faucets, bathroom faucets, and showers.
- Features an LED display and overheat protection.
Figura 1: Frente view of the ANZZI Envo Electric Tankless Water Heater, showcasing es verde casing and digital temperature display.
3. Especificaciones
| Atributo | Valor |
|---|---|
| Marca | ANZZI |
| Número de modelo | WH-AZ024-M3 |
| Quétage | 24000 vatios (24 kW) |
| Volumentage | 240 voltios |
| Salida de calor | 24000 vatios |
| Eficiencia | Alta eficiencia |
| Tipo de montaje | Muro |
| Dimensiones del producto | 3.54 x 10.24 x 15.16 pulgadas |
| Peso del artículo | 16.87 libras |
| Características especiales | LED Display, Overheat Protection |
| Proceso de dar un título | ETL |
4. Instalación
Professional installation is recommended for this appliance. Consult a licensed electrician and plumber prior to purchase and installation to ensure compliance with all local codes and proper sizing for your household needs.
4.1 Requisitos eléctricos
The ANZZI Envo 24 kW unit requires significant electrical capacity. Ensure your breaker panel can accommodate the following:
- Sorteo máximo: 100 Amps
- Disyuntor requerido: 3 x 40 AMP Double Pole Breakers
- Required Wire: 3x8 AWG
- Minimum Panel Capacity: 200 Amps or more recommended.
Figura 2: Electrical requirements diagram for the ANZZI Envo 24 kW tankless water heater, detailing breaker and wire specifications.
4.2 Unit Capacity and Sizing
The performance of your tankless water heater depends on the incoming water temperature and the desired flow rate. Refer to the chart below to determine the appropriate unit capacity for your local climate and usage needs.
Figura 3: A map illustrating general temperature areas across the US, alongside a chart detailing GPM (Gallons Per Minute) usage for various fixtures at different inlet water temperatures, assuming an outlet temperature of 105°F.
4.3 Consideraciones de colocación
The compact design of the ANZZI Envo allows for flexible installation. It can be installed in various locations such as under sinks, in utility closets, or garages, provided electrical and plumbing requirements are met.
Figura 4: Example installation of the ANZZI Envo tankless water heater within a bathroom cabinet, demonstrating its space-saving design.
Figura 5: An illustration showing the ANZZI Envo tankless water heater installed in a garage, providing hot water to multiple points of use in an adjacent kitchen and an upstairs bathroom.
Figura 6: Detailed dimensions of the ANZZI Envo tankless water heater, measuring approximately 10.2 inches wide by 15.1 inches high.
5. Instrucciones de funcionamiento
The ANZZI Envo tankless water heater is designed for user-friendly operation. Once installed and powered, the unit will display the current water temperature.
5.1 Ajuste de temperatura
- Use the up and down arrow buttons on the front panel to adjust the desired water temperature.
- The LED display will show the set temperature.
- The unit will automatically heat water to the set temperature when flow is detected.
Figura 7: Internal diagram illustrating the flow of cold water into the heating element and the output of continuous hot water, highlighting the instant heating process.
5.2 Suministro de agua caliente
The unit provides instant and continuous hot water on demand. Open any hot water faucet to activate the heater. The unit will begin heating water as it flows through.
Figura 8: A shower head delivering hot water, demonstrating the instant hot water on demand feature of the ANZZI Envo tankless water heater.
Vídeo 1: An official ANZZI video demonstrating the installation and operation of the Envo Tankless Electric Water Heater, highlighting its compact size, instant hot water delivery to faucets and showers, and patented heating technology.
6. Mantenimiento
Regular maintenance ensures optimal performance and longevity of your ANZZI Envo tankless water heater.
- Inspección anual: Have a qualified technician inspect the unit annually for any signs of wear or damage.
- Limpieza: Limpie periódicamente el exterior de la unidad con un paño suave y húmedo.amp Paño. No utilice limpiadores abrasivos.
- Filtro de sedimentos: If your water supply has high sediment, consider installing an external sediment filter and clean it regularly according to the filter manufacturer's instructions.
- Descalcificar: In areas with hard water, mineral buildup can affect performance. Consult a professional for descaling procedures if necessary.
Figura 9: A visual comparison demonstrating that the ANZZI Envo tankless water heater occupies over 90% less volume than a standard tank water heater.
7. Solución de problemas
If you experience issues with your ANZZI Envo tankless water heater, refer to the following common problems and solutions. For persistent issues, contact customer support.
| Problema | Posible causa | Solución |
|---|---|---|
| No hay agua caliente | No power, low water flow, unit malfunction | Check circuit breaker. Ensure adequate water flow. Contact support if power and flow are normal. |
| El agua no está lo suficientemente caliente | Temperature set too low, high flow rate, cold inlet water | Increase set temperature. Reduce water flow at faucet. Refer to capacity chart (Figure 3). |
| Fugas en la unidad | Conexiones sueltas, componentes dañados | Turn off water supply and power. Inspect connections for tightness. Contact a plumber or support. |
| Código de error en pantalla | Fallo interno | Note the error code and contact ANZZI customer support for assistance. |
8. Garantía y soporte
For warranty information, please refer to the documentation included with your purchase or visit the official ANZZI website. If you require technical assistance, replacement parts, or have questions regarding your ANZZI Envo Electric Tankless Water Heater, please contact ANZZI customer support.
ANZZI Customer Service: Refer to your product packaging or the ANZZI webSitio para obtener la información de contacto más actualizada.
