Sunco 6-Inch LED Flush Mount Disc Light Instruction Manual

1. Introducción

This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your Sunco 6-Inch LED Flush Mount Disc Lights. Please read this manual thoroughly before installation and retain it for future reference.

2. Información de seguridad

• ADVERTENCIA: Riesgo de descarga eléctrica. Desconecte la alimentación desde el fusible o disyuntor antes de realizar cualquier instalación o mantenimiento.
• La instalación debe ser realizada por un electricista calificado de acuerdo con los códigos eléctricos nacionales y locales.
• No modifique ni altere el accesorio.
• Asegúrese de que el volumen de suministrotage es compatible con los requisitos del dispositivo (120 voltios).
• Do not handle live wires with bare hands.
• Este producto es Damp Calificado, suitable for use in bathrooms and other damp locations, but not directly exposed to water.

3. ¿Qué hay en la caja?

Each Sunco 6-Inch LED Flush Mount Disc Light package includes the following components:

• LED Disc Light Fixture (12 units per pack)
• Conector TP24
• adaptador E26
• Spring Clips (pre-attached or included for installation)
• Tuercas de alambre
• Tornillos de montaje
• Manual de instrucciones

4. Instrucciones de instalación

The Sunco LED Disc Light offers versatile installation options for both recessed cans (5-inch or 6-inch) and junction boxes.

4.1. Herramientas necesarias

• Destornillador
• Wire Strippers (if connecting to junction box)
• Gafas de seguridad

4.2. Recessed Can Installation (5-inch or 6-inch)

1. Apague la energía: Ensure power to the fixture is OFF at the circuit breaker.
2. Remove existing trim: Carefully remove the existing bulb and trim from the recessed can.
3. Connect E26 adapter: Screw the provided E26 adapter into the existing socket of the recessed can.
4. Connect TP24 connector: Plug the TP24 connector from the disc light into the E26 adapter's connector.
5. Adjust spring clips: The spring clips on the disc light can be adjusted for 5-inch or 6-inch cans. Ensure they are set to the correct position for your can size.
6. Accesorio de inserción: Gently push the LED disc light into the recessed can until the spring clips secure it flush with the ceiling.

4.3. Instalación de la caja de conexiones

1. Apague la energía: Ensure power to the junction box is OFF at the circuit breaker.
2. Preparar los cables: Strip the ends of the black (live), white (neutral), and green/bare copper (ground) wires from the junction box, if necessary.
3. Conecte los cables: Use the provided wire nuts to connect the corresponding wires:
   • Black fixture wire to Black junction box wire.
   • White fixture wire to White junction box wire.
   • Green/Yellow fixture wire to Green/Bare Copper junction box wire.
4. Fijación segura: Use the provided mounting screws to attach the disc light's base directly to the junction box.
5. Colocar el difusor: Twist the diffuser onto the fixture base until securely fastened.

5. Instrucciones de funcionamiento

5.1. Encendido y apagado

Once installed, restore power at the circuit breaker. The light can be turned on or off using a standard wall switch.

5.2. Temperatura de color seleccionable (CCT)

This fixture features a selectable CCT switch located on the back of the light. Before final installation, select your desired color temperature from the available options: 3000K (Warm White), 4000K (Cool White), 5000K (Daylight), 6000K (Daylight Deluxe), or 6500K (Daylight Deluxe).

5.3. Funcionalidad de atenuación

The Sunco LED Disc Light is dimmable from 10% to 100% with compatible LED dimmers. Refer to the compatibility list below for recommended dimmer models.

Atenuadores compatibles:

6. Mantenimiento

The Sunco LED Disc Light is designed for long-lasting performance with minimal maintenance. The LED components are non-removable.

• Limpieza: Asegúrese de que la energía esté apagada antes de limpiarla. Limpie el accesorio con un paño suave y seco.amp Paño. No utilice limpiadores abrasivos ni disolventes.
• Reemplazo de bombilla: Esta luminaria utiliza LED integrados y no requiere reemplazo de bombillas.

7. Solución de problemas

8. Especificaciones

9. Garantía y soporte

Sunco Lighting offers a Protección de 7 año warranty on this product. For any questions, technical assistance, or warranty claims, please contact Sunco Lighting customer support. Visit the Tienda de iluminación Sunco Para más información.