1. Producto terminadoview
The AZZA CSAZ-280B Spectra Black is an ATX Mid Tower gaming case designed to house various computer components. It features a tempered glass side panel and a steel right panel. This manual provides instructions for the proper installation and maintenance of your computer components within this case.
Imagen 1.1: Frontal izquierda view of the AZZA CSAZ-280B Spectra Black case, showcasing the tempered glass side panel and the front panel design with integrated RGB lighting.
Características principales:
- Left Panel: Tempered glass with rubber mounts for secure installation.
- Right Panel: Solid steel panel.
- Motherboard Compatibility: Supports ATX, Micro-ATX, and ITX motherboards.
- Drive Bays: Up to three 2.5" drive bays and up to two 3.5" drive bays.
- Maximum CPU Cooler Height: Up to 170 mm.
- Maximum Video Card Length: Up to 290 mm.
2. Configuración e instalación de componentes
Follow these steps for proper installation of your computer components into the AZZA CSAZ-280B case. Ensure the system is powered off and unplugged before beginning any installation.
2.1 Conexiones del panel de E/S frontal
The top panel of the case features various input/output ports and controls for convenient access.
Imagen 2.1: De arriba hacia abajo view of the case's front I/O panel, indicating the Power button, LED control button, Audio jacks (Mic and Headphone), two USB 2.0 ports, and one USB 3.0 port.
- Botón de encendido: Presione para encender o apagar el sistema.
- Botón LED: Controls the RGB lighting effects of the case.
- Conectores de audio: Separate ports for microphone and headphones.
- Puertos USB: 2.0 Two ports for connecting USB 2.0 devices.
- Puerto USB 3.0: One port for connecting USB 3.0 devices, offering faster data transfer speeds.
2.2 Instalación de la unidad
The case supports both 3.5" HDDs and 2.5" SSDs. Refer to the images below for drive bay locations.
Imagen 2.2: Interno view showing the lower drive cage, capable of holding one 3.5" HDD or one 2.5" SSD, and an additional dedicated 3.5" HDD bay.
Imagen 2.3: Interno view showing two dedicated 2.5" SSD mounting brackets located behind the motherboard tray.
- Para discos duros de 3.5": Install drives into the designated 3.5" drive cage located at the bottom front of the case. Secure with screws.
- Para SSD de 2.5": Install drives into the dedicated 2.5" mounting brackets behind the motherboard tray or in the lower drive cage. Secure with screws.
2.3 Instalación de la tarjeta gráfica
La carcasa admite tarjetas gráficas de hasta 290 mm de longitud.
Imagen 2.4: Interno view illustrating the maximum supported length for a video card, which is 290mm.
- Retire las cubiertas de las ranuras PCI-E necesarias de la parte trasera de la carcasa.
- Carefully insert the graphics card into the PCI-E slot on your motherboard.
- Fije la tarjeta gráfica a la carcasa con tornillos.
2.4 Fan Installation and Airflow
Proper fan placement ensures optimal cooling performance. The case supports various fan configurations:
- Frente: Supports 3 x 120mm fans or 2 x 140mm fans.
- Arriba: Admite 2 ventiladores de 120 mm.
- Trasero: Admite 1 ventilador de 120 mm.
Imagen 2.5: Interno view of the front panel, highlighting the mounting locations for up to three 120mm fans or two 140mm fans.
Imagen 2.6: Interno view of the top panel, showing the mounting locations for up to two 120mm fans.
Imagen 2.7: Interno view of the rear panel, indicating the mounting location for one 120mm fan.
- Identify the desired fan mounting locations (front, top, rear).
- Secure fans to the case using appropriate fan screws.
- Connect fan power cables to the motherboard or a fan controller.
2.5 Instalación de la fuente de alimentación
The power supply unit (PSU) mounts at the bottom of the case.
- Slide the PSU into the designated compartment at the bottom rear of the case.
- Fije la fuente de alimentación a la carcasa mediante tornillos desde la parte trasera.
- Route power cables through the cable management cutouts to reach your components.
3. Instrucciones de funcionamiento
3.1 Encendido y apagado
To power on your system, press the power button located on the top I/O panel. To power off, either shut down through your operating system or press and hold the power button for several seconds.
3.2 LED de control
Use the dedicated LED button on the top I/O panel to cycle through various lighting modes and colors for the integrated RGB elements of the case.
4. Mantenimiento
El mantenimiento regular ayuda a garantizar un rendimiento óptimo y la longevidad de los componentes de su PC.
- Limpieza de polvo: Limpie periódicamente los filtros de polvo y los componentes internos con aire comprimido. Asegúrese de que el sistema esté apagado y desenchufado antes de limpiarlo.
- Sistema de organización de cables: Ensure cables are neatly routed to prevent obstruction of airflow and to maintain a clean interior.
- Cuidado del panel: Clean the tempered glass panel with a soft, lint-free cloth and a mild glass cleaner. Avoid abrasive materials.
5. Solución de problemas
Esta sección aborda problemas comunes que podrías encontrar.
- El sistema no se enciende:
- Verifique que todos los cables de alimentación (ATX de 24 pines, CPU de 8 pines, alimentación de GPU) estén conectados de forma segura a la placa base y a los componentes.
- Asegúrese de que el interruptor de alimentación esté en la posición “ENCENDIDO”.
- Verifique que el cable del botón de encendido del panel frontal esté conectado correctamente al encabezado del panel frontal de la placa base.
- Fans Not Spinning / LEDs Not Lighting Up:
- Confirm fan power cables are properly connected to the motherboard or fan controller.
- Ensure LED cables are correctly connected to the motherboard's RGB header or the case's LED controller.
- Press the LED button on the top I/O panel to cycle through modes or turn on the lighting.
- Los puertos USB no funcionan:
- Check that the USB 2.0 and USB 3.0 headers from the front panel are correctly plugged into the corresponding ports on your motherboard.
- Los conectores de audio no funcionan:
- Ensure the HD Audio cable from the front panel is securely connected to the HD Audio header on your motherboard.
6. Especificaciones
Detailed technical specifications for the AZZA CSAZ-280B Spectra Black case.
| Característica | Especificación |
|---|---|
| Nombre del modelo | CSAZ-280B SPECTRA BLACK |
| Tipo de caso | Torre Media |
| Compatibilidad de la placa base | ATX, Micro-ATX, ITX |
| Material | Plástico, vidrio templado |
| Color | Negro |
| Dimensiones (L x An x Al) | 19.69 x 17.32 x 9.84 pulgadas |
| Peso del artículo | 11 libras |
| Bahías de unidad de 2.5" | Hasta 3 |
| Bahías de unidad de 3.5" | Hasta 2 |
| Altura máxima del enfriador de CPU | 170 milímetros |
| Longitud máxima de la tarjeta de video | 290 milímetros |
| Puertos de E / S frontales | 2 x USB 2.0, 1 x USB 3.0, Audio, Mic, Power, LED Control |
| Soporte de ventilador frontal | 3 x 120 mm o 2 x 140 mm |
| Top Fan Support | 2 x 120 mm |
| Rear Fan Support | 1 x 120 mm |
| Montaje de la fuente de alimentación | Montaje inferior |
7. Garantía y soporte
Política de devolución de 7.1
Este producto está sujeto a una política de devolución de 30 días para reembolso o reemplazo, según los términos del minorista.
7.2 Soporte técnico
For technical assistance or inquiries regarding your AZZA product, please visit the official AZZA website or contact their customer support channels. You can find more information and contact details by visiting the AZZA Store on Amazon.