1. Información de seguridad
Please read and understand all instructions completely before beginning installation. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause property damage or personal injury.
- Riesgo de incendio: Supply conductors (power wiring) connecting to the fixture must be rated 90°C. If you are uncertain, consult a qualified electrician.
- Riesgo de descarga eléctrica: La instalación del kit de adaptación LED requiere conocimientos de los sistemas eléctricos de luminarias. Si no está calificado, no intente la instalación. Póngase en contacto con un electricista calificado.
- Install this kit only in luminaires that have the construction features and dimensions shown in the product documentation.
- To prevent wiring harness or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.
- Este lamp is not intended for use with emergency exit luminaires or emergency lights.
- Antes de intentar la instalación, consulte el código eléctrico local, ya que establece los estándares de cableado para su localidad.
- The fixture is designed to be switched from a wall switch. Ensure the black power supply wire is connected to the switch. Do NOT connect the white supply wire to the switch.
- Do not leave bare wires or exposed outside the wire nut connectors.
- No haga ni altere ningún orificio abierto en el gabinete del cableado o de los componentes eléctricos durante la instalación del kit.
- This product is ETL Listed and operates at 120VAC.
2. Producto terminadoview
The Maxxima 2-inch Ultra-Thin Recessed Anti-Glare LED Downlight is a canless, IC rated lighting fixture designed for various indoor applications. It features a round black trim and offers customizable lighting with 5 selectable color temperatures and dimming capabilities.
- Eficiencia energética: 9W LED, equivalent to 40W, consuming less power.
- Brillo: 550 Lumens with anti-glare lighting and a 36° beam spread.
- Color Temperature Selectable (CCT): Choose from 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), or 5000K (Daylight).
- Regulable: Compatible with most standard LED dimmers, offering a 20%-100% dimmable range.
- Alto CRI: 90 CRI rating for accurate color appearance.
- Construcción duradera: Features a durable cast aluminum body and deep recessed trim.
- Damp Calificación: Adecuado para su uso en damp locations such as bathrooms and kitchens.
Figure 2.1: Maxxima 2-inch Ultra-Thin Recessed LED Downlight, Black
3. Lista de piezas
Asegúrese de que todos los componentes estén presentes antes de comenzar la instalación:
- LED Downlight with spring clips
- Junction Box (with integrated CCT selection switch)
- Connector cable (pre-attached to downlight and junction box)
- Junta de espuma
Figura 3.1: Lado view of the Maxxima 2-inch Ultra-Thin Recessed LED Downlight, showing the heat sink and connector.
4. Configuración e instalación
This downlight is designed for easy installation without the need for a traditional recessed can or housing.
- Preparar la apertura: Cut a hole in the ceiling drywall with a recommended diameter of 2.5 inches. Ensure there are no obstructions in the ceiling space.
- Conectar el cableado: Open the junction box. Connect the building's supply wires (typically black for live, white for neutral, and green/bare copper for ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure and comply with local electrical codes.
- Seleccionar temperatura de color: Before closing the junction box, use the CCT selection switch located inside the junction box to choose your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
- Position Junction Box: Place the junction box into the ceiling beam or through the cutout hole into the ceiling cavity.
- Conectar Downlight: Connect the downlight's cable to the junction box's cable using the provided quick connector. Ensure a firm connection.
- Instalar Downlight: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the cutout hole. The spring clips will automatically secure the fixture against the ceiling. Ensure the foam gasket creates a tight seal.
Figura 4.1: Dimensiones del producto para la planificación de la instalación.
Figure 4.2: CCT selection switch inside the junction box.
Video 4.1: Official product video demonstrating the features and installation of the Maxxima 2-inch Anti-Glare 5 CCT Slim LED Downlight.
5. Instrucciones de funcionamiento
Once installed, operating your Maxxima LED downlight is straightforward.
5.1. Selección de la temperatura de color
The desired color temperature (CCT) must be selected using the switch inside the junction box antes installation or by accessing the junction box after installation. The available options are 2700K, 3000K, 3500K, 4000K, and 5000K.
Figure 5.1: Visual comparison of selectable color temperatures.
5.2. Oscurecimiento
This downlight is dimmable from 20% to 100% with most standard LED dimmers. Ensure your dimmer switch is compatible with LED fixtures for optimal performance and to prevent flickering.
Figure 5.2: Downlight installed in a ceiling, demonstrating illumination.
6. Mantenimiento
The Maxxima LED downlight requires minimal maintenance.
- Limpieza: Para limpiar el artefacto, asegúrese de que esté apagado. Limpie la superficie con un paño suave, seco o ligeramente húmedo.amp paño. No utilice productos químicos agresivos ni limpiadores abrasivos.
- No hay piezas que el usuario pueda reparar: La fuente de luz LED está integrada y no es reemplazable. No intente abrir ni reparar la lámpara.
7. Solución de problemas
Si tiene problemas con su downlight, consulte los siguientes problemas y soluciones comunes:
| Problema | Posible causa | Solución |
|---|---|---|
| La luz no enciende | No power supply; Loose wiring; Incorrect CCT setting; Faulty fixture | Check circuit breaker; Verify all wire connections are secure; Ensure CCT switch is set to a valid position; Contact support if fixture is faulty. |
| La luz parpadea | Regulador incompatible; cableado suelto; circuito sobrecargado | Ensure dimmer is LED compatible; Check all electrical connections; Reduce load on circuit. |
| La luz es demasiado tenue o demasiado brillante. | Dimmer setting; CCT setting | Adjust dimmer to desired level; Verify CCT setting is as intended. |
| La luz hace un zumbido | Incompatible dimmer; Loose wiring | Replace with an LED-compatible dimmer; Check and secure all wiring connections. |
8. Especificaciones
| Especificación | Detalle |
|---|---|
| Marca | maxxima |
| Nombre del modelo | LMR-S20803B |
| Dimensiones del producto | 3.16" de largo x 3.16" de ancho x 2.6" de alto |
| Peso del artículo | 13.1 onzas |
| Color | Negro |
| Material | Aluminio |
| Formulario de lámpara | Empotrado |
| Tipo de instalación | Montaje empotrado |
| Recommended Hole Cutout | 2.5 pulgadas |
| Fuente de poder | Eléctrico con cable |
| Volumentage | 120 voltios |
| Quétage | 9 vatios |
| Brillo | 550 lúmenes |
| Eficiencia | 61 lm/W |
| Temperatura de color | 2700K, 3000K, 3500K, 4000K, 5000K seleccionables |
| CRI | 90 |
| Regulable | Sí (20%-100%) |
| Uso en interiores y exteriores | Interior (Damp Calificado) |
| Proceso de dar un título | Listado en ETL |
9. Garantía y soporte
This Maxxima LED downlight is covered by a 3 año de garantía a partir de la fecha de compra.
For warranty claims, technical support, or any questions regarding your product, please contact Maxxima customer service. Refer to the product packaging or the official Maxxima webSitio para obtener información de contacto actualizada.
Conserve su comprobante de compra para fines de garantía.