Introducción
Thank you for choosing the Tailcas USB Rechargeable Motion Sensor Cabinet Light. This manual provides detailed instructions for the safe and efficient use of your new light. Please read it thoroughly before installation and operation, and retain it for future reference.
Información de seguridad
- This product is designed for indoor use only. Do not expose it to rain or moisture.
- Do not disassemble, repair, or modify the product. This may cause damage, electric shock, or fire.
- Mantenga el dispositivo alejado de fuentes de calor, luz solar directa y materiales inflamables.
- Utilice únicamente el volumen de carga especificadotage (5V USB).
- No mire directamente a la luz LED cuando esté encendida, ya que puede causar fatiga visual.
- Mantener fuera del alcance de los niños.
Contenido del paquete
Por favor revise el paquete para ver los siguientes artículos:
- Tailcas Motion Sensor Cabinet Light (3 units)
- Magnetic Strips
- Cinta adhesiva de doble cara
- USB Charging Cable (not explicitly listed but implied by 'USB Rechargeable')
Características del producto
- Sensor de movimiento y luz: Automatically turns on when motion is detected in dark environments.
- Recargable por USB: Built-in 2000mAh high-capacity battery.
- Tres modos de funcionamiento: Sensor Mode, Always On Mode, Always Off Mode.
- Brillo ajustable: Dimmable from 5% to 100% in Always On Mode.
- Función de memoria: Remembers the last brightness setting.
- Fácil instalación: Multiple mounting options including magnetic, adhesive, and hanging.
Image: Comparison highlighting the 26 LED design and USB rechargeable battery of the Tailcas light.
Instalación
The Tailcas Motion Sensor Cabinet Light offers three convenient installation methods:
- Fijación magnética: The light has built-in magnets. Simply attach it to any ironwork surface.
- Montaje adhesivo: For non-metallic surfaces, use the provided magnetic strip with double-sided adhesive tape. Peel off the protective film from one side of the adhesive tape and attach it to the magnetic strip. Then, peel off the other side and firmly press the magnetic strip onto your desired clean, dry surface. The light can then be magnetically attached to this strip.
- Colgando: The light features hanging holes on the back. You can hang it on nails or hooks for a secure fit.
Image: Visual guide demonstrating magnetic, adhesive, and hanging installation options.
Ensure the installation surface is clean and dry for optimal adhesion.
Operación
The light features a push-button switch to cycle through its three operating modes and adjust brightness.
Modos de funcionamiento:
- Mode 1: Sensor Mode (Automatic)
In this mode, the light will automatically turn on when motion is detected within a 10-foot (3-meter) range and 120-degree angle in a dark environment. It will automatically turn off after approximately 20 seconds of no motion. - Modo 2: Modo siempre encendido
La luz permanece encendida continuamente, independientemente del movimiento o las condiciones de luz ambiental. - Mode 3: Always Off Mode
La luz permanece apagada.
Ajuste de brillo:
In Modo siempre encendido, you can adjust the brightness from 5% to 100% by pressing and holding the control button. The light has a memory function that will recall your last brightness setting when you switch back to Always On Mode.
Image: Visual representation of the Sensor, Always On, and Always Off modes.
Image: Illustration of the motion and light sensor's detection capabilities.
Cargando
The Tailcas Motion Sensor Cabinet Light is equipped with a 2000mAh rechargeable lithium-polymer battery.
- Connect the provided USB charging cable to the light's charging port and to a 5V USB power source (e.g., power bank, USB charger, laptop).
- A red indicator light typically signifies that the device is charging.
- The indicator light will turn green or off when the battery is fully charged.
- Una carga completa tarda aproximadamente de 2 a 3 horas.
- Once fully charged, the light can last up to 50 days in Sensor Mode or 5-6 hours in Always On Mode, depending on usage.
Image: Details on the 2000mAh rechargeable battery, charging process, and battery life.
Mantenimiento
- Clean the light with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Ensure the motion sensor lens is clear of dust and obstructions for optimal performance.
- Si va a almacenarlo durante un período prolongado, cargue la batería periódicamente para mantener su vida útil.
Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| Light does not turn on in Sensor Mode. | 1. Insufficient ambient light (sensor mode only activates in dark). 2. No se detectó movimiento. 3. La batería está baja o agotada. | 1. Pruebe en un entorno más oscuro. 2. Ensure motion is within the detection range. 3. Charge the light. |
| Light stays on constantly in Sensor Mode. | Continuous motion within detection range. | Relocate the light to an area with less constant activity or switch to Always Off Mode. |
| La luz no se carga. | 1. Faulty USB cable or power adapter. 2. El puerto de carga está dañado. | 1. Try a different USB cable and power adapter. 2. Contact customer support if the port is damaged. |
| El ajuste de brillo no funciona. | Not in Always On Mode. | Switch the light to Always On Mode to adjust brightness. |
Presupuesto
| Marca | Tailcas |
| Número de modelo | 582ff97f-c4e1-494d-b473-05c1bf189514 |
| Dimensiones (L x An x Al) | 20 x 3.3 x 1.5 cm |
| Peso | 290 gramos |
| Material | Hierro |
| Fuente de poder | Rechargeable Battery (2 Lithium-polymer, 2000mAh) |
| Volumentage | 5 voltios |
| Quétage | 1.5 vatios |
| Tipo de luz | LED (26 bombillas) |
| Color claro | Blanco |
| Eficiencia luminosa | 260 lumens (90 lm/W) |
| Método de control | Touch (Push-button) |
| Rango del sensor de movimiento | 10 feet (3 meters), 120 degrees |
| Nivel de impermeabilidad | Not waterproof (Indoor use only) |
| Tipo de instalación | Adhesive/Magnet Mounting |
Garantía y soporte
Tailcas products are manufactured to high-quality standards. For any questions, concerns, or technical support regarding your product, please refer to the retailer's return policy or contact Tailcas customer service through the platform where you purchased the item. Please have your purchase details and model number ready.
