SCHWAIGER TVS7040 511 TV Floor Stand Instruction Manual

Información importante de seguridad

Please read this instruction manual carefully before assembly and use. Keep this manual for future reference. Incorrect assembly or use may result in damage to the product, TV, or personal injury.

Asegúrese de que todos los componentes estén presentes y sin daños antes del montaje.
No exceda la capacidad de carga máxima de 40 kg (88 lbs).
Ensure the TV size is within the recommended range of 37-70 inches and VESA compatibility (max 600x400).
Montar sobre una superficie suave y limpia para evitar rayones.
Utilice siempre dos personas para levantar y montar el televisor.
Coloque el soporte sobre una superficie estable y nivelada.
Mantenga alejados a los niños y las mascotas durante el montaje.

Contenido del paquete

Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact SCHWAIGER customer support.

Base de vidrio templado
Columna de soporte
Soporte de montaje para TV (compatible con VESA)
Mounting Hardware Kit (screws, washers, spacers for various TV models)
Clips de gestión de cables
Herramientas de montaje (por ejemplo, llave Allen, llave inglesa)
Manual de instrucciones

Instrucciones de instalación y montaje

Siga estos pasos cuidadosamente para un montaje correcto. Se recomienda la ayuda de otra persona para montar el televisor.

Paso 1: Ensamblar la base y la columna

Attach the support column to the tempered glass base using the provided screws and tools. Ensure the column is securely fastened and upright.

Frente view of the SCHWAIGER TV floor stand without a TV, showing the VESA mounting bracket attached to the central column and the tempered glass base.

Imagen: Frente view of the stand's column and base assembly.

Paso 2: Fije los soportes de montaje del televisor al televisor

Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the two vertical mounting brackets to the back of your TV. Ensure they are level and securely tightened.

Close-up of the TV mounting bracket showing a screw securing it to the VESA plate, with adjustment slots visible.

Image: Detail of TV bracket attachment.

Paso 3: Monte el televisor en el soporte

With assistance, carefully lift the TV and hook the attached vertical brackets onto the horizontal bar of the stand's mounting plate. Ensure the TV is securely seated. Use the safety screws or locking mechanisms to prevent accidental dislodgement.

Frente view of the SCHWAIGER TV floor stand with a large flat-screen TV mounted, showing the black tempered glass base and the central support column.

Image: Fully assembled stand with TV.

Paso 4: Gestión de cables

Utilize the integrated cable guide and clips on the support column to neatly route your TV and device cables. This helps maintain a clean appearance and prevents tripping hazards.

Close-up of the central support column of the TV stand, showing a yellow cable neatly routed and secured with cable management clips along the back.

Image: Cable management feature.

Instrucciones de funcionamiento

Swivelling Function

The SCHWAIGER TVS7040 511 TV Floor Stand features a swivelling mechanism. To adjust the viewing angle, gently grasp the sides of your TV and rotate it to the desired position. Avoid excessive force. The swivel range allows for optimal viewdesde varios puntos de una habitación.

Close-up of the top swivel mechanism of the TV stand, showing the pivot point and robust construction.

Image: Detail of the swivel mechanism.

Mantenimiento

Limpieza: Utilice un paño suave y seco para limpiar el soporte. Para manchas difíciles en la base de vidrio, puede usar un limpiacristales suave. Evite limpiadores abrasivos o disolventes.
Inspecciones: Revise periódicamente todos los tornillos y conexiones para asegurarse de que estén bien apretados y seguros. Vuelva a apretarlos si es necesario.
Sistema de organización de cables: Ensure cables are still neatly routed and not pinched or strained.

Solución de problemas

Problema	Posible causa	Solución
El televisor no está nivelado	Mounting brackets not aligned; stand on uneven surface.	Adjust TV brackets; ensure stand is on a flat, stable surface.
El soporte se siente inestable	Screws are loose; stand overloaded.	Check and tighten all assembly screws; ensure TV weight is within limits.
Difficulty swivelling TV	Mecanismo rígido; obstrucción.	Ensure no cables are caught; apply gentle, even pressure. Do not force.

Presupuesto

Marca	Schwaiger
Número de modelo	TVS7040 511 (Item Model Number: 4004005034257)
Tamaños de televisores compatibles	37-70 pulgadas (94-178 cm)
Capacidad de carga máxima	40 kg (88 libras)
Compatibilidad VESA	Max 600 x 400 mm
Tipo de movimiento	Girar
Material	Tempered Glass (Base), Steel (Column, Bracket)
Dimensiones del producto	5.25 x 0.31 x 1.66 inches (Note: These dimensions appear to be for packaging or a component, not the full assembled stand. Refer to assembly instructions for overall footprint.)
Peso del artículo	19.14 libras
Color	Negro

Garantía y soporte

This product comes with a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official SCHWAIGER website. For technical support, missing parts, or any questions regarding the product, please contact SCHWAIGER customer service.

Fabricante: Schwaiger

Fecha de primera disponibilidad: 9 de diciembre de 2022