Intex Ultra Quadra XTR Frame Pool Set Instruction Manual

1. Introducción

This manual provides essential instructions for the safe assembly, operation, and maintenance of your Intex Ultra Quadra XTR Frame Pool Set (Model 2893200). This rectangular pool, measuring 549 x 274 x 132 cm, is designed for outdoor, freestanding use. Please read all instructions carefully before installation and keep this manual for future reference.

Figure 1: Assembled Intex Ultra Quadra XTR Frame Pool. This image shows the complete rectangular pool with its dark grey exterior and blue tiled interior pattern.

2. Información de seguridad

ADVERTENCIA: Failure to follow these instructions can result in serious injury or death. Always supervise children. Drowning hazard exists. This pool is intended for outdoor use only.

• Nunca deje a los niños sin supervisión dentro o cerca de la piscina.
• Asegúrese de que la piscina esté instalada sobre una superficie nivelada y estable.
• Mantenga los aparatos eléctricos alejados de la piscina.
• No se sumerja ni salte a la piscina.
• Empty the pool completely when not in use for extended periods.
• Regularly inspect the pool for damage or wear.

3. Contenido del paquete

Carefully unpack all items and check against the list below. If any parts are missing or damaged, do not proceed with assembly and contact Intex customer support.

• Intex Ultra Quadra XTR Frame Pool Liner (549 x 274 x 132 cm)
• Componentes del marco de acero (varios postes y conectores)
• Pool Liner with 38 mm shut-off valve
• Inlet and Outlet Fittings (for water circulation, if a pump is added later)
• Tapón de drenaje

Nota: This pool set does NO include a filtration system, ladder, ground cloth, pool cover, skimmer, hoses, or cleaning kit. These items must be purchased separately if desired.

Figure 2: Assortment of pool parts. This image displays various components such as inlet/outlet fittings, gaskets, and caps, which are part of the pool's plumbing system.

4. Configuración y montaje

Assembly typically requires two people and takes approximately 60 minutes. No additional tools or safety pins are required due to the precision locking system.

4.1 Preparación del sitio

1. Choose a firm, level area free of sharp objects, debris, and excessive slopes.
2. Ensure the chosen site is large enough for the pool (605 x 330 cm including support legs) and allows for safe access around it.
3. Clear any vegetation or grass from the area to prevent damage to the liner.

4.2 Montaje del marco

1. Spread the pool liner evenly on the prepared ground.
2. Identify the different frame components (horizontal beams, vertical legs, corner joints).
3. Insert the horizontal beams through the sleeves at the top edge of the pool liner.
4. Connect the horizontal beams using the corner joints.
5. Attach the vertical support legs to the horizontal beams, ensuring they lock into place with the precision locking system.
6. Ensure all connections are secure and the frame is stable before proceeding.

4.3 Inlet and Outlet Installation

1. Locate the pre-cut holes in the pool liner for the inlet and outlet fittings.
2. Install the provided fittings according to the diagrams in the separate plumbing instructions (if applicable) or by pushing them through the liner from the inside and securing them with the external nuts/gaskets.
3. Ensure the 38 mm shut-off valve is correctly installed on the outlet.

Figure 3: Pool inlet and outlet fittings. This image shows the grey plastic fittings used for water circulation, including the shut-off valve and grilles.

5. Operación de la piscina

5.1 Llenado de la piscina

1. Asegúrese de que el tapón de drenaje esté bien cerrado.
2. Empiece a llenar la piscina con agua. A medida que sube el nivel, alise con cuidado las arrugas en el fondo del revestimiento.
3. Fill the pool to the recommended water height of 114 cm, which corresponds to approximately 90% capacity (17,203 liters). Do not overfill.

5.2 Tratamiento del agua

As this pool set does not include a filtration system, regular water treatment is crucial to maintain hygiene and water clarity. Consult a pool supply professional for appropriate chemicals and testing kits suitable for your pool's volume and local conditions. The pool is suitable for saltwater use if a compatible saltwater system is purchased separately.

6. Mantenimiento

6.1 Limpieza de la piscina

1. Regularly remove debris (leaves, insects) from the water surface using a skimmer net (not included).
2. Brush the pool walls and bottom to prevent algae growth.
3. For thorough cleaning, consider purchasing a compatible pool vacuum (not included).

6.2 Drenaje y almacenamiento

1. Para vaciar la piscina, conecte una manguera de jardín a la válvula de drenaje y ábrala. Dirija el agua a una zona de drenaje adecuada.
2. Once empty, clean and dry the liner and frame components thoroughly.
3. Desmonte el marco invirtiendo los pasos de montaje.
4. Store the pool liner and frame components in a dry, protected area, away from extreme temperatures and pests.

6.3 Liner and Frame Care

• The reinforced laminated vinyl liner (0.73 mm bottom, 0.73 mm wall) is durable, but avoid sharp objects.
• The high-quality powder-coated steel frame is designed for enhanced rust resistance and durability. Inspect for any signs of corrosion or damage periodically.

7. Solución de problemas

• Fuga de agua: Check the drain plug, inlet/outlet fittings, and the pool liner for punctures. Use a repair patch kit (not included) for small liner holes.
• Marco inestable: Ensure all frame components are fully connected and locked into place. Verify the pool is on a perfectly level surface.
• Agua turbia: This indicates a need for water treatment. Test water chemistry and add appropriate chemicals. Regular cleaning is also essential.

8. Especificaciones

9. Garantía y soporte

For warranty information or technical support, please contact Intex customer service directly. Refer to the packaging or the official Intex webSitio para obtener los detalles de contacto y los términos de garantía más actualizados aplicables a su región.

Websitio: www.intexcorp.com