1. Introducción
This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Festool 577616 Impact Driver and Drill Set. This set includes the TID 18 HPC Cordless Impact Screwdriver and the QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill. Designed for versatility and flexibility on the job site, these tools are suitable for various drilling and driving tasks in multiple materials.
Figura 1: Sobreview of the Festool 577616 Impact Driver and Drill Set components.
2. Instrucciones de seguridad importantes
Observe siempre las siguientes precauciones de seguridad para reducir el riesgo de descarga eléctrica, incendio y lesiones graves.
- Lee todas las instrucciones: Familiarícese con el funcionamiento de la herramienta y las pautas de seguridad antes de usarla.
- Utilice equipo de protección personal: Utilice siempre protección para los ojos, protección auditiva y guantes adecuados.
- Maintain a safe work area: Mantenga el área de trabajo limpia, bien iluminada y libre de obstrucciones.
- Asegure la pieza de trabajo: Siempre limpioamp o de otro modo asegurar la pieza de trabajo para evitar movimiento durante la operación.
- Evite el arranque accidental: Ensure the switch is in the off-position before inserting the battery pack, picking up or carrying the tool.
- Utilice la herramienta correcta para el trabajo: No fuerce una herramienta o accesorio pequeño para que realice el trabajo de una herramienta pesada.
- Desconectar la energía: Retire la batería antes de realizar cualquier ajuste, cambiar accesorios o guardar la herramienta.
- Almacenar herramientas inactivas: Cuando no estén en uso, las herramientas deben almacenarse en un lugar seco, alto o cerrado, fuera del alcance de los niños.
- Inspect tools regularly: Verifique si hay desalineación o atascamiento de partes móviles, rotura de piezas y cualquier otra condición que pueda afectar el funcionamiento de la herramienta.
- Seguridad de la batería: Use only specified battery packs and chargers. Do not incinerate battery packs, even if they are severely damaged.
3. Componentes incluidos
The Festool 577616 set includes the following items:
- TID 18 Cordless Impact Screwdriver
- QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill
- Two (2) BP 18 Li 4.0 ASI Battery Packs
- Rapid Charger TCL 6
- FastFix Keyless Chuck (1/2”/13mm)
- FastFix Right Angle Chuck
- Additional Side Mounted Handle
- Clip para cinturón
- Systainer SYS3 M 237 storage case
Figura 2: detallada view of the TID 18 Impact Driver, TPC 18/4 Hammer Drill, and various chucks.
4. Configuración y uso inicial
4.1. Carga de las baterías
- Connect the Rapid Charger TCL 6 to a suitable power outlet.
- Slide a BP 18 Li 4.0 ASI Battery Pack onto the charger until it clicks into place.
- The charger's indicator light will show the charging status. A solid green light indicates a full charge.
- Una vez que esté completamente cargada, retire la batería del cargador.
Figure 3: Festool BP 18 Li 4.0 ASI Battery Packs.
4.2. Colocación de accesorios
Both the TID 18 and TPC 18/4 feature the FastFix system for quick accessory changes.
- FastFix Keyless Chuck (1/2”/13mm): For standard drilling and driving bits. Align the chuck with the spindle and twist to secure.
- FastFix Right Angle Chuck: For working in confined spaces. Attach similarly to the keyless chuck.
- Additional Side Mounted Handle: For increased control and stability, especially with the TPC 18/4. Attach to the designated collar on the drill.
- Pinza de cinturón: Can be attached to either side of the tool for convenient carrying.
5. Operación
5.1. TID 18 Cordless Impact Screwdriver
The TID 18 is designed for efficient fastening with its powerful brushless EC-TEC motor.
- Niveles de velocidad: The tool features three speed levels for various applications. Select the appropriate speed using the speed selector switch.
- T Mode: Utilize the specialized T mode for self-tapping screws, which helps prevent overtightening and stripping.
- Kickback-Free Hammer Mechanism: This mechanism drives fasteners effectively, reducing user fatigue and improving control.
- Portapuntas: The tool has a tool-free 1/4-inch bit holder and integrated bit storage for convenience.
- Iluminación LED: An optimum LED light illuminates the work area.
Figure 4: Using the TID 18 Impact Driver for fastening applications.
5.2. QUADRIVE TPC 18 Cordless Percussion (Hammer) Drill
The TPC 18/4 is a versatile drill for drilling into various materials, including masonry with its percussion function.
- Drilling Modes: Switch between drilling, hammer drilling, and screwdriving modes as required by the application.
- Control de velocidad: Adjust the speed for optimal performance based on the material and bit size.
- Ergonomía: The compact design and optional side handle allow for accurate and comfortable work, even in hard-to-reach areas.
Figure 5: The TPC 18/4 Hammer Drill in use.
6. Mantenimiento
Regular maintenance ensures the longevity and optimal performance of your Festool tools.
- Limpieza: Keep ventilation openings clear and clean. Use a soft, damp cloth to wipe down the tool exterior. Do not use harsh chemicals or abrasive cleaners.
- Cuidado de la batería: Store battery packs in a cool, dry place. Avoid fully discharging lithium-ion batteries for extended periods.
- Almacenamiento: Store the tools and accessories in the Systainer SYS3 M 237 case in a dry, secure location away from direct sunlight and extreme temperatures.
- Inspección: Periodically check all screws and fasteners for tightness. Inspect power cords (for charger) for damage.
7. Solución de problemas
| Problema | Posible causa | Solución |
|---|---|---|
| La herramienta no arranca. | La batería no está insertada correctamente o está descargada. | Asegúrese de que la batería esté bien colocada. Cárguela si es necesario. |
| Potencia o rendimiento reducido. | Low battery charge, incorrect speed setting, or dull bit/accessory. | Charge battery. Select higher speed. Replace or sharpen bit. |
| La herramienta se sobrecalienta. | Sobrecarga de la herramienta o ventilación bloqueada. | Reduce load. Allow tool to cool. Clean ventilation openings. |
| El portabrocas no sujeta la broca de forma segura. | Chuck not tightened properly or damaged. | Ensure chuck is fully tightened. Inspect chuck for damage; replace if necessary. |
For issues not listed here, please contact Festool Service.
8. Especificaciones técnicas
| Característica | Especificación |
|---|---|
| Marca | Festool |
| Número de modelo | 577616 |
| Fuente de poder | Funciona con pilas |
| Volumentage | 18 voltios |
| Capacidad de la batería | 4 Amp Hours (each BP 18 Li 4.0 ASI) |
| Velocidad máxima de rotación | 3.6E+2 RPM (360 RPM) |
| Número de velocidades | 3 |
| Máxima potencia | 850 vatios |
| Tipo de taladro | Hammer Drill (TPC 18/4) |
| Capacidad de perforación de madera | 0.5 pulgadas |
| Capacidad de perforación de metal | 0.5 pulgadas |
| Peso del artículo | 17.91 Pounds (total set) |
| Dimensiones del producto | 15.59" de largo x 11.65" de ancho x 9.33" de alto |
9. Información de garantía
This Festool product is covered by a Garantía del fabricante de 3 años. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full details on warranty terms and conditions, please refer to the official Festool warranty documentation or contact Festool Service.
10. Atención al cliente
For technical assistance, service, or spare parts, please contact Festool Service. Detailed contact information can be found on the official Festool website or through your authorized Festool dealer. Festool is committed to providing comprehensive support for its products.
Visit the official Festool store for more information: Festool Store on Amazon
