HOMPOW G58

HOMPOW G58 3000A Peak Car Battery Jump Starter Instruction Manual

1. Producto terminadoview

The HOMPOW G58 is a powerful and portable car battery jump starter designed to start vehicles with up to 10L gas or 8L diesel engines. It features a 3000A peak current and an 88.8Wh capacity, capable of providing multiple jump starts on a single charge. Beyond jump starting, it functions as a versatile power bank with USB QC 3.0 and Type-C ports, and includes a multi-mode LED flashlight for emergencies.

HOMPOW G58 Jump Starter connected to a car battery

Image: The HOMPOW G58 Jump Starter connected to a car battery, illustrating its primary function. It highlights compatibility with various vehicle types and engine sizes.

Características principales:

  • Corriente pico de 3000 A: Capable of starting large gas (up to 10L) and diesel (up to 8L) engines.
  • Banco de energía multifuncional: Equipped with USB QC 3.0 and Type-C ports for charging smartphones, tablets, and other devices.
  • Linterna LED integrada: Features Flashlight, Strobe, and SOS modes for various lighting needs.
  • Protección de seguridad avanzada: Built-in intelligent clamps provide protection against reverse polarity, short-circuit, over-current, over-charge, and over-temperature.
  • Pantalla LCD inteligente: Displays battery status and operational information.

2. Instrucciones de seguridad

Lea y comprenda toda la información de seguridad antes de usar este producto. No seguir estas instrucciones podría provocar una descarga eléctrica, un incendio o lesiones graves.

  • Conecte siempre el cl rojoamp al terminal positivo (+) y al negro clamp al terminal negativo (-).
  • No toque el cl rojo y negroamps together to prevent short-circuiting.
  • Do not attempt to jump start an engine that exceeds the maximum displacement supported by the jump starter.
  • Do not crank the engine for more than 3 seconds at a time. Allow the jump starter to cool down for at least 1 minute between each start attempt.
  • Ensure the device has at least 50% power before use.
  • Mantenga el dispositivo fuera del alcance de los niños.
  • Do not expose the product to rain or extreme temperatures.
  • Conservar en un lugar fresco y seco cuando no esté en uso.
Advanced safety protection features of the smart jumper cable

Image: Illustration of the advanced safety protection features integrated into the smart jumper cables, including short-circuit, high-temperature, overload, over-voltage, surge voltage, reverse polarity, spark-proof, and over-discharge protection.

3. Contenido del paquete

Verifique que todos los artículos estén presentes en su paquete:

  • HOMPOW G58 Jump Starter Unit
  • Cables de puente inteligentes con Clamps
  • Cable de carga USB-C
  • Manual de usuario
  • Estuche de almacenamiento
Contents included with the HOMPOW G58 Jump Starter

Image: A visual representation of all items included in the HOMPOW G58 Jump Starter package, such as the main unit, smart clamps, charging cable, and storage case.

4. Diagrama del producto

Familiarize yourself with the components of your HOMPOW G58 Jump Starter:

  1. Unidad de arranque auxiliar
  2. Smart Jumper Cable Port (EC5)
  3. USB QC 3.0 Output Port
  4. Puerto de entrada/salida tipo C
  5. Linterna LED
  6. Power Button / Flashlight Control
  7. LCD Screen (Battery Level, Status Indicators)
  8. Positivo (+) Rojo Clamp
  9. Negative (-) Black Clamp
HOMPOW G58 Jump Starter showing its compact size and various ports

Image: The HOMPOW G58 Jump Starter displayed alongside various electronic devices, demonstrating its compact size and multiple charging ports (USB, Type-C).

5. Carga del arrancador

Before first use, fully charge the jump starter. It is recommended to recharge the device every three months to maintain battery health, especially when not in regular use.

  • Conecte el cable de carga USB-C provisto al puerto de entrada Tipo-C del arrancador.
  • Conecte el otro extremo del cable USB-C a un adaptador de pared USB (no incluido) o a un cargador de automóvil.
  • The LCD screen will indicate the charging status. Charge until the screen shows 100%.

6. Instrucciones de funcionamiento: Arranque de un vehículo con pinzas

Siga estos pasos cuidadosamente para arrancar su vehículo de manera segura:

  1. Prepare el vehículo: Asegúrese de que el encendido del vehículo esté apagado y el freno de estacionamiento esté puesto.
  2. Conecte los cables puente al arrancador auxiliar: Insert the blue plug of the smart jumper cables completely into the EC5 port on the jump starter. The jump starter's indicator light should turn blue, indicating it's ready.
  3. Conectar Clamps a la batería:
    • Adjuntar el ROJO positivo (+) clamp al terminal positivo (+) de la batería del vehículo.
    • Adjuntar el NEGRO negativo (-) clamp al terminal negativo (-) de la batería del vehículo.

    The smart cable indicator should show a solid green light, confirming a correct connection. If it shows a red light or flashes, check your connections.

  4. Arranque el vehículo: Once the green light is solid, start your vehicle's engine within 45 seconds. If the engine does not start immediately, wait at least 1 minute before the next attempt. Do not crank for more than 3 seconds per attempt.
  5. Quitar clamps: After the vehicle starts, immediately remove the black negative (-) clamp Primero, luego el rojo positivo (+) clamp. Disconnect the jumper cables from the jump starter.

Forced Start Mode (If no green light):

If the smart cable indicator does not show a solid green light after connecting to the battery (e.g., due to a deeply discharged battery), you can use Forced Start Mode:

  • Asegúrese de que el clamps están conectados correctamente a los terminales de la batería del vehículo.
  • Press and hold the "BOOST" button (or equivalent red button) on the smart cable for 3 seconds until the green light turns solid.
  • Arranque el vehículo dentro de los 30 segundos.
  • Una vez que el vehículo arranque, retire inmediatamente el clamps como se describe arriba.
Four-step guide for jump starting a car with the HOMPOW G58

Image: A visual four-step guide demonstrating the process of jump starting a car: 1. Insert the clamp, 2. Attach clamps, 3. Start your car, 4. Remove the clamps.

7. Operating Instructions: Power Bank Function

The HOMPOW G58 can charge various electronic devices:

  • Connect your device's charging cable to either the USB QC 3.0 port or the Type-C port on the jump starter.
  • El arrancador comenzará a cargar automáticamente su dispositivo.
  • La pantalla LCD mostrará el estado de salida.
HOMPOW G58 Jump Starter charging a tablet and phone

Image: The HOMPOW G58 Jump Starter acting as a power bank, charging a tablet and a smartphone, highlighting its versatility beyond jump starting.

8. Instrucciones de funcionamiento: Linterna LED

La linterna LED incorporada ofrece tres modos:

  • Para encender/apagar: Mantenga presionado el botón de encendido durante 2 segundos.
  • Para cambiar de modo: Once the light is on, press the power button once to cycle through modes: Stable Light → Strobe Light → SOS Signal.
HOMPOW G58 Jump Starter with its LED flashlight illuminating the ground in different modes

Image: The HOMPOW G58 Jump Starter's LED flashlight in operation, demonstrating its stable, strobe, and SOS light modes for emergency situations.

9. Mantenimiento

  • Carga regular: To prolong battery life, charge the jump starter every three months, even if it has not been used.
  • Limpieza: Limpie la unidad con un paño seco y suave. No utilice productos químicos agresivos ni limpiadores abrasivos.
  • Almacenamiento: Guarde el arrancador en un lugar fresco y seco, alejado de la luz solar directa y de temperaturas extremas.

10. Solución de problemas

ProblemaPosible causaSolución
El vehículo no arranca.Low battery on jump starter, incorrect clamp connection, vehicle battery completely dead.Ensure jump starter is charged above 50%. Check clamp connections (red to positive, black to negative). Try Forced Start Mode if the smart cable shows no green light. Allow 1 minute between attempts.
El indicador de cable inteligente está rojo o parpadea.Reverse polarity, short circuit, over-current, or other safety issue.Desconecte inmediatamente el clamps and re-check connections. Ensure clamps do not touch each other. If the issue persists, consult the safety section.
El arrancador auxiliar no carga los dispositivos.Jump starter battery low, incorrect cable, device not compatible.Charge the jump starter. Use a compatible charging cable. Ensure the device is properly connected.

11. Especificaciones

CaracterísticaDetalle
MarcaHOMPOW
Número de modeloG58
Cima Ampanhelo3000 Amps
Capacidad de la batería88.8Wh (equivalent to approx. 24000mAh at 3.7V)
Compatibilidad del motorHasta 10 L de gasolina / 8 L de diésel
Vol de salidatage12 Volts (for jump starting)
Salida USB 1Carga rápida de 5 V/9 V/12 V
Salida USB 25 V/2.1 A
Entrada/salida tipo C5 V/3 A
Modos de luz LEDLinterna, luz estroboscópica, SOS
Temperatura de funcionamiento-4 °F a +140 °F (-20 °C a +60 °C)
Dimensiones22.61 x 9.91 x 4.06 cm
Peso757.5 gramos

12. Garantía y soporte

The HOMPOW G58 Jump Starter comes with a 24-month warranty from the date of purchase. If you encounter any issues or have questions regarding the product, please contact HOMPOW customer support for assistance. Our team is dedicated to providing prompt and helpful solutions.

For warranty claims or technical support, please refer to the contact information provided on the product packaging or the official HOMPOW websitio.

© 2024 HOMPOW. Todos los derechos reservados.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.